First Conical Mesh Vape Tank? Wotofo nexMESH Sub-Ohm Tank.
After we acquire OFRF vape lines and nexMESH coil technology, we have updated nexMESH Sub-Ohm Tank packing.
Wotofo x OFRF nexMESH Sub Ohm Tank Main Features:
1. Conical Mesh Coil Powered by nexMESH Coil Technology
$12.39 900 BF Style 18mm Mechanical Mod (2 Pieces) 16500
316 stainless steel construction
Battery type: battery sold seapatelyLong mod: powerd by single 16650 battery
Short mod: powered by single 16500 battery
510 threading connectiion
Spring-loaded firing button
Authentic DOVPO M...
$19.49 ULTON Quake Style 18350/18500/18650 Brass Hybrid Mod 24mm Mech Mod
Ready to ship in 24 hours
510 hybrid connection;
Full mech mod;
Compatiable with 18350/18500/18650 battery
$35.9 Authentic IJOY AI EVO Resin 20W 1100mAh Pod System Starter Kit...
$24.99 Authentic Vandy Vape Widowmaker 24mm RDA
Coupon Code: MAPWIDOWMAKER
Length: 20.5mm (without drip tip & 510)
Juice well capacity: 1ml
Dual posts build deck
Single / dual coil configuration
Adjustable side airflow
Comes with squonk pin
Newbie Vaper here.
I thought this build was okay but when I went to a vape shop and the guy saw I had a dual coil set up on my rda on a single battery -- he said it's unsafe or something without knowing what the actual build was. So I came here to ask if my build is okay.
Hi, I've been doing a solid few days of research. My current favorite look and accessory wise is the Nova 200w mod. I do not need the wattage though, is likely enjoy to sit around 475f. Having as much control as possible over the voltage, wattage, and temperature and even the certain physical...
I stumbled upon this device and it seems to offer me exactly what I need in terms of vaping but I want some honest opinions about it from users.
Please do not compare it to other products.
I am strictly talking about the PLUS version.
Thanks in advance!
Hey all, im new to this forum. My vaping journey has been an amazing one.. I started mouth to lung vaping but then got into the mod - sub ohm side. I quickly found that sub ohm is the way LOL.. I now build my own coils on a wotofo mod and use a ohm meter to make sure my mech mod is safe..
CoilART Mage Sub Ohm Tank Review
I've been using the CoilART Mage Sub Ohm Tank for about a month, on and off. It was sent to me by CoilART to review.
It's a 24mm sub ohm tank that takes 810 drip tips. It's pretty short at just 34.5mm tall without the drip tip. It's compatible...
Hey guys, my setup is a Wismec Predator 228 mod with a Dead Rabbit RDA. I have a 0.68ohm unidentified kanthal, single coil build in there and am using it at 15W. Whenever I wick it, i have to rewick it after half a day. Im using 100% organic, unbleached cotton. Can anyone tell me what I'm doing...
Vandy Vape Maze is an unique 24mm diameter bottom feeding Sub Ohm BF RDA with 2ml e-juice capacity, in other words, Maze tank can compatible with the Regulated and Mechanical Mod, according to your own preferences. Maze Sub Ohm BF RDA not only follows vandy vapes high-quality Stainless Steel...
Today I would like to introduce new product from Joyetech-- ProCore Remix Atomizer
It is not just a normal atomizer. The ProCore Remix was meant to be used as an RTA, RDA or sub-ohm atomizer as you prefer. Featuring an rebuildable tank system, the ProCore Remix atomizer has a...
I just wrapped my first dual set of 6 wrap 22ga kanthal coils the other day wrapped around one of those basic small screw driver that you get in the box with just about any RDA you buy .
I usually use my RX200 to crank the watts to get a warm vape but its broken so im using just my single...
So I'm new to vaping and I cannot for the life of me find the answer to this, and mostly, I get topics about high ohm vaping.
I bought a Lite 60, haven't made any changes, and the coil is 0.4 ohm. When I vape lately though (after a week), the display tells me I'm up at 0.45 ohm. I vape at...
Whats up guys, i've had a lot of problems lately with ohms being too low on more complex builds, not sure where the problem.. The most recent was a build tonight, I have 2 pieces of claptoned 28g SS/32g Ni80, and one strand of fused clapton 26g SS/3g NI80 I then wound the three cores (4 pieces...
Good evening fellows,
It is the first time to be presented here as 2FDEAL (To friend deal, a new online store offers free shipping service from China). We are dedicated to provide vaping gear in high quality and service in high standard.
Today, we are announcing the give away:
I was fortunate enough to win as a reviewer for Ceravape. This posting is rather late but submitted to Ceravape nonetheless. Please pardon the video starting in the middle. Hubby stitched it and saved it in that location. (I was very nervous at the beginning but was my old self after that...
I have a limitless i-joy rta. My build is .272 . I'm using 65 /35 vg/pg . My cotton is well saturated and I vape fairly low on an alien 220. 35watts or less. All of a sudden it tasted burnt. Not after chain vaping but on the 1st pull. I checked the volts, I like to keep them under 4, they...
I've never encountered this problem until now. My Temple RDA will produce a good dense vapor to begin with, then it'll tone down to a light whisp production.
Running a staged Clapton build
2x26K 1x36k staged with 1x22k
Wrapped 7 times on a 3/16
Rx 200 mod (if that helps any)
This is a review of Goodejuice's Wild Turkey Tobacco naturally extracted tobacco flavor ejuice. The juice I'm vaping is 12mg nicotine strength. I'm vaping out of a Kanger Subox Mini, .5 ohm coil (though the subox reads this one at .6), 16.5 watts.
Let me begin by saying I have been vaping...
My wife and I are converted smokers. I used to smoke around a pack a day, and then I switched to American Spirit roll-ups. We were still smoking a lot. We started vaping at the end of 2013, and we haven't looked back since!
We started running Kangertech Evod pen vapes, but now we are...
Here is a rundown of the Uwell Crown Sub-Ohm Tank in Rose Gold
Thank you to vapordna.com for the mod!
This is my go to Tank for flavor and vape now! Take a look why.
Avid vapers back in 2009, watching the industry grow and evolve, while trying to bring the best...
Title says it all, I'm picking up an invader 2 tomorrow and I'm looking for help with some .1-.15 ohm coils, prefer a quick ramp up. And yes. I know it's low, but the amp load will be split between 2 vtc4, so about 21 amps a piece gives me plenty of headroom. That being said, looking for ideas...
I'm not new to vaping (started about 4 years ago), but this is my first sub-ohm kit, and something weird (and kind of scary) just happened :/
It's a new Kanger Subtank Mini with the RBA coil inside, put on a new Coolfire IV mod. I have the Coolfire set to 18 watts and the display says its at...
I'm pretty new to the vape scene but I've done a bit of research. I'm wanting a sub-ohm tank because they seem to burn the lowest amount of oil and pull a lot of vapor if you have it at the correct settings. I'm also wanting to make 316 stainless steel coils with organic japanese cotton.
Nothing is impossible~
This mod TC control with any kind of wire !
but it is not temp control, it is taste control. it is a mod able to protect all wires from dry hit.
Also it can monitor juice level and will flash a reminder to refill juice.
it won't burn any coil, it won't change the...
Hey everyone. I'm writing in hopes that someone can point me in the right direction. I really want a wood mod. I love how they look and really want a nice one for ... eh.. $100 or less. I've seen some reviews on the Tesla Invader II and like how that looks, although something even more...
Just this last Sunday, I headed out to my local Yeti shop and declared to them proudly "I WANT A NEW SUB OHM TANK" (not really, I'm quite shy.)
Anyways, after a few days of considering my choices, which were going to be either the SMOK TFV4, because that thing is just insane in it's own right...
Hey you guys, so I'm relatively new to vaping (6 months in) and I've been using a kanger mini on a Istick 50w and it's worked great but I'm wanting an upgrade to bigger better things.
The biggest issue I have is if the betteries will work on my mod safely.
The tank I'm buying is the uwell...
So I recently got an iSub G, and holy snap, crackle, pop batman. It's to the point that it will bother my non-vaper boyfriend in the other room even with the TV on. Anyone else have this problem? Any simple ways to quiet it down a bit? Thanks!
So I have been vaping on cheap pens for awhile, but its just not doing it for me. I want a sub ohm mec mod, but there is so much to learn and I don't even know where to start. Is there a book on this I can read? Any recommendations for a starter kit? My price range is 100$ for mod and tank. Any...
Hey everyone! I got another giveaway this week. This time i'm doing a Kanger Subox Nano Kit! Check out how to enter in my video below! And yes, it will be a brand new one, not the one used in the video!
Want more entries for a better chance at winning...