Yeah you can buy it and add shipping and it's yours...... I'm sure Fastech has it....@MannyScoot No luck. Can you pull it up by chance?
Last edited:
Yeah you can buy it and add shipping and it's yours...... I'm sure Fastech has it....@MannyScoot No luck. Can you pull it up by chance?
I tried both sites. FT has it on the page but when you try to checkout its no longer available. Thinking the same issue is happening at GB. Tried a few times today and it wouldn't let me add it to the cart. Shows a shipping date on the page but you can't add to the cart. I'll try to get on my laptop over the weekend whenever I get a little time. Tried on both phones and my tablet to no avail. Page is loading superslow. Ib did find a link that was posted a few years back on here. Interesting to say the least. Thank you! !!Yeah you can buy it and add shipping and it's yours...... I'm sure Fastech has it....
Sorry.....I tried both sites. FT has it on the page but when you try to checkout its no longer available. Thinking the same issue is happening at GB. Tried a few times today and it wouldn't let me add it to the cart. Shows a shipping date on the page but you can't add to the cart. I'll try to get on my laptop over the weekend whenever I get a little time. Tried on both phones and my tablet to no avail. Page is loading superslow. Ib did find a link that was posted a few years back on here. Interesting to say the least. Thank you! !!
http://vapingunderground.com/threads/iron-maiden-rdta-bad-news.259377/
Sorry.....
Sent from my Pixel 2 XL using Tapatalk
I never use SS wire. I like to dry burn my coils till they glow red(-ish) orange and then I rinse them, and repeat these steps multiple times each time before I rewick, and, if I do that with an advanced coil build of mine that took me a serious lot of my time and effort to build, with Ni80 wire my coils seem to last ~20 times longer when compared to SS wire. (Even, if I don't glow the SS coils orange, because SS coils can't handle much more than just a really very faint red glow... despite taking this properly into account the SS coils still wear out in a matter of only days, at least for me.) With premade types of wire, all you basically have to do is wrap it around your coil tool or screwdriver, mount the coils into your atomizer, dry fire and work out the hot spots, wick it up and juice it up... done. Whereas if you build your coils all the way from the ground up by using a drill and a swivel tool with a ball bearing normally used for skateboards (or three ball bearing fishing swivels hooked up one after the other), then all that extra time and effort it took to build your coils gets thrown away also each time when you throw the coils away. So there are pros and cons to everything I guess, but I never use prebuilt wire, as the flavor performance I get from that is typically only somewhere halfway in between reasonable and good, so not exactly close to premium flavor performance. Flavor wise, prebuilt wire IMO is just the easiest quickest temporary solution if you haven't got anything better available to you and you are still in the process of teaching yourself the particular part of advanced coil building that is the living soul of flavor chasing, and are aiming to find the right balance (depending on your own personal preferences) between flavor performance and convenience/practicality related factors.Thank you. I have some Alien wire here. It's SS though. I'll try and wrap up a few coils tomorrow or over the weekend like you said. I like anywhere between a 2.5mm and 3.0 but ugh, never enough with me. I do like the Alien or the SSFC. Tiger is ok but. ...
Tonight I put two builds up. Did a set of claptons SS 3mm 6 wrap @ .48 ohm on a RDA then just finished a plain dual 24g K1 7w 3.0mm running at 3.1...Not sure about that build but seems to be ok, need to check the connections again. Had juice mail and wanted to test the new flavors in with the RDA's vs tanks here. I think I found another flavor profile in the making. Smh. I'll never be able to pin point my start up flavors for diy if I keep this up. Lol
I'll let you know about the build whenever I do that in the next day or so. Thank you!
I never said it's rocket science, but I never use any tanks other than the Reload RTA because I do not want to sacrifice flavor if I'm using a tank (only some juices taste better in the Reload RTA for me when compared to using a quality RDA... all other tanks have failed me so if you are a vape salesman you'll have a really miserable hard time convincing me to buy a different tank), and, I never build to .03 ohms because there simply is no sensible reason for me to do so, at least not in pure terms of flavor and feel of the vape. Well, maybe one day I might decide to build to .02 ohms... after I find the right mod for that...I give it very minimal air or as low as I can go to get thick clouds..... That's why I like the Fatality..... More control of the airflow and control of the juice flow.
If a tank doesn't have a juice flow controller you are limited to your power and air .... You have to find the right air and power balance........
it's not rocket science, I open the air where I like the pull and it's quiet and I give the bitch wattage until I get the cloud and taste i'm looking for..... These are ni80 and a pair ohms out at .03 ...... You need 185 watts to get a decent cloud and taste......
View attachment 126428
That's the 53 or 58 mm right.....I never said it's rocket science, but I never use any tanks other than the Reload RTA because I do not want to sacrifice flavor if I'm using a tank (only some juices taste better in the Reload RTA for me when compared to using a quality RDA... all other tanks have failed me so if you are a vape salesman you'll have a really miserable hard time convincing me to buy a different tank), and, I never build to .03 ohms because there simply is no sensible reason for me to do so, at least not in pure terms of flavor and feel of the vape. Well, maybe one day I might decide to build to .02 ohms... after I find the right mod for that...
View attachment 126882
I never use SS wire. I like to dry burn my coils till they glow red(-ish) orange and then I rinse them, and repeat these steps multiple times each time before I rewick, and, if I do that with an advanced coil build of mine that took me a serious lot of my time and effort to build, with Ni80 wire my coils seem to last ~20 times longer when compared to SS wire. (Even, if I don't glow the SS coils orange, because SS coils can't handle much more than just a really very faint red glow... despite taking this properly into account the SS coils still wear out in a matter of only days, at least for me.) With premade types of wire, all you basically have to do is wrap it around your coil tool or screwdriver, mount the coils into your atomizer, dry fire and work out the hot spots, wick it up and juice it up... done. Whereas if you build your coils all the way from the ground up by using a drill and a swivel tool with a ball bearing normally used for skateboards (or three ball bearing fishing swivels hooked up one after the other), then all that extra time and effort it took to build your coils gets thrown away also each time when you throw the coils away. So there are pros and cons to everything I guess, but I never use prebuilt wire, as the flavor performance I get from that is typically only somewhere halfway in between reasonable and good, so not exactly close to premium flavor performance. Flavor wise, prebuilt wire IMO is just the easiest quickest temporary solution if you haven't got anything better available to you and you are still in the process of teaching yourself the particular part of advanced coil building that is the living soul of flavor chasing, and are aiming to find the right balance (depending on your own personal preferences) between flavor performance and convenience/practicality related factors.
52.80mm... Denver, The Mile High City is 5280 feet above sea level so that's why.That's the 53 or 58 mm right.....
Sent from my Pixel 2 XL using Tapatalk
Sweet.....52.80mm... Denver, The Mile High City is 5280 feet above sea level so that's why.
I'm not really sure yet, but I was thinking of getting a custom one... maybe with a Hammond 1590R1 enclosure (7.55″ × 4.38″ × 2.24″) and something along these lines:Sweet.....
Now comes the challenge.... Finding the mod......
Sent from my Pixel 2 XL using Tapatalk
This is as big as I go...I'm not really sure yet, but I was thinking of getting a custom one... maybe with a Hammond 1590R1 enclosure (7.55″ × 4.38″ × 2.24″) and something along these lines:
https://www.overlander.co.uk/batter...20c-lipo-battery-overlander-supersportxl.html