Become a Patron!
Post pictures of your setups!
- Thread starter Mjjmfa
- Start date
CrazyChef
Custom Hand Crafted Coils - PureCoils.com
VU Vendor
VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
That would be, IMHO, the finest RDA available on the market today.
I'm loving my Goon as well ray BUT does that bugger ever heat up! Taste and clouds for days though. Just hard to chain vaoe without burning your lips.
I have my Dotmod Petri on top of my IPV5. You know the 'finest RDA available'. It is pretty darn good ...
I have my Dotmod Petri on top of my IPV5. You know the 'finest RDA available'. It is pretty darn good ...
I'm loving my Goon as well ray BUT does that bugger ever heat up! Taste and clouds for days though. Just hard to chain vaoe without burning your lips.
I have my Dotmod Petri on top of my IPV5. You know the 'finest RDA available'. It is pretty darn good ...
I havent had that issue yet, what material did you get yours in? Im not sure I would say the Petri is the finest but it definitely ranks up on the list, its definitely got a following though.
Thats right, could be the reason? Even with all of the builds Ive had in the Brass version its gotten hot but you could still grab it without having burns, I also barely put my lips on the tips...I learned the hard way with a few RDA's in the past...like the derringer and bambino
My coils tend to heat up real fast ... I admit that. I also am very gentle putting my lips to the drip tip, lol. Having used many a series mod I learned the hard way. The worst was the time I forgot to put the top cap back on. Doh. I still cannot believe I did that once. Over the years I have burnt myself a handful of times. Hot juice from over dripping usually. The last year I've been burn free~! At least I've become more careful lately.
LOL claptoned lips...that'll teach you quick! I should have my Point Blank Mod here next week and a Vaptio S150 here soon along with a few more RDA's....I may be getting rid of the Mason and a few other things Im not using much...
LMK about that Mason ... I have a few regulated mods I want to trade away actually. LMK about the Point Blank too. I almost pullerd the trigger on that (pun intended) but got an Underground instead which NEVER leaves the house. I am now so much a series guy. I want to get the piglet too. I would trade a lot for a piglet. I got a conspiracy 2puffs in mail ... way overpriced but meh ... bragging rights I guess.
Ill sell you the Mason for $45...It was $60 new and Ive only built on it 3-4 different times for pictures...I havent used it for much else. I may get rid of the HOG V2 and the Mason together for $150 but Im not sure yet...LMK about that Mason ... I have a few regulated mods I want to trade away actually. LMK about the Point Blank too. I almost pullerd the trigger on that (pun intended) but got an Underground instead which NEVER leaves the house. I am now so much a series guy. I want to get the piglet too. I would trade a lot for a piglet. I got a conspiracy 2puffs in mail ... way overpriced but meh ... bragging rights I guess.
My goon hasn't even gotten close to warm yet. What are you running it on? What wattage?I'm loving my Goon as well ray BUT does that bugger ever heat up! Taste and clouds for days though. Just hard to chain vaoe without burning your lips.
I have my Dotmod Petri on top of my IPV5. You know the 'finest RDA available'. It is pretty darn good ...
RX200 about 85-95w
Hey what do you think about the laisimo 200 watt i think is Ls2 with the screen display????
Sent from my TM785M3
Is like 50 bucks at 101 vape I've been thinking about it for a while
I have one and its basically a snow wolf...but I feel the wattage is off on mine but Im pretty sure its like that on all of them...I feel its weaker then it should be but Ive been using the Hohm Wrecker G2 and it makes all other mods feel that way....
I have edited their software so its less buggy and wont hard brick the devices and have made custom papers and more for it...its a nice device and well worth $50, I got mine for $60-70 I think...
Like I said its not a bad move, its a great mod...Im just used to the G2 and how much hotter and more real the wattage feels with it, dont let that stop you from picking it up....I would pick up another G2 over a DNA200...but thats just me.
The max watt mod i have is 75 watts ,i got 7 mods which i really don't care for 3 of them and the laisimo looks super cool and if i decide to vape like you crazy guys at 100's of watts some day i can do it with this one thanks for the input
Sent from my TM785M3
Sent from my TM785M3
Its a update port...I havent tried charging with it but Im sure it will like most others, but I dont recommend it..
You must know by now it is not twatts alone that gets an atty hot. First your 85 watts on an RX200 is not the same as 85 watts on a G2 for instance. But of most importance is the builds we use. I use a .13 build on the atty with wire that heats up fast. The mod itself tends to get warm.
Vapingbeauty
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Sent from my SM-N910V using Tapatalk
I am very well aware yes. I was just answering a question.
Just pushed 250 watts on my 6-coils 0.14 build
And yes, I vape on it, not just for showing or taking picture
Talk about warm vape, lol.
Sent from my iPad using Tapatalk
And yes, I vape on it, not just for showing or taking picture
Talk about warm vape, lol.
Sent from my iPad using Tapatalk
flavor_vapor
Member For 4 Years
Sent from my SAMSUNG-SM-G530AZ using Tapatalk
My latest DNA200 mod (VT133) and a new 25mm RTA's
L to R Hcigar VT133 with a SS Aromamizer Supreme (2 x 18650), Hcigar VT200 with a Black Aromamizer Supreme (3s Lipo)
Cheers,
Steve
L to R Hcigar VT133 with a SS Aromamizer Supreme (2 x 18650), Hcigar VT200 with a Black Aromamizer Supreme (3s Lipo)
Cheers,
Steve
Last edited:
And 22 amps. Be careful on that. Thats a really low build for a series mod.
Actually closer to 20 amps as it does not really stay at 8.4 volts for more than ten minutes. Average amps are around 17-18 amps drain. When the batteries are fresh I do not chain vape it. I'm careful - I use LGs, Samsungs and Sonys only. That said I would not recommend anyone trying it unless they really are sensitive to mech mods. I also find I ned to use cotton candy to wick - it does not burn as quickly as cotton bacon. All that said evryone has their own style. I also vape my other ss Cricket with an Aeronaut at .86 ohm.
I generally stick to mech mods. But I'm going tomorrow for an eye operation and a friend kindly gifted me a new set up to help me feel nbetter. He also knows I'm now broke for months and months. No new attys or mods for me. Sigh. After both eyes are done I'll have spent 4000 dollars but I cannot see now - I have to have the operations. One tomorrow on the right eye and the left eye a week later.
Added this PWM mod from Scottsmods.com this weekend. Extremely solid and well built, absolutely no movement or rattle on the door and fire button. Very happy with the fit and finish.
This has been my dream set up for the past week. Finally got a homemade box (fully mech) down the smallest size I possibly could made entirely out of African padauk wood (so sturdy yet so pretty) and with a speckled agate stone button 
, and with a .35 staggered fused Clapton in my NaRDA clone I just couldn't be happier
Anybody else out there using the NaRDA? I haven't touched any of my other toppers since I received this a couple months back, it satisfies my every need just perfectly!
Size comparison with my noisy cricket
I'm currently making a small batch (3-4) for sale if anyone's interested, especially anyone in Canada, just pm me for details. Prices will range from 100-140 depending on stone and wood materials used
Sent from my iPhone using
, and with a .35 staggered fused Clapton in my NaRDA clone I just couldn't be happier Anybody else out there using the NaRDA? I haven't touched any of my other toppers since I received this a couple months back, it satisfies my every need just perfectly!
I'm currently making a small batch (3-4) for sale if anyone's interested, especially anyone in Canada, just pm me for details. Prices will range from 100-140 depending on stone and wood materials used
Sent from my iPhone using
Seriously, i mean who knew? Then I was looking for other options for funsies and the first thing that popped up on Google was Ketchup, so apparently Google knew, but I didn't
When I use to be into custom flashlight (Candlepower forum), I used Mothers Mag Aluminum Polish with good results. Use to make them shine/sparkle.Seriously, i mean who knew? Then I was looking for other options for funsies and the first thing that popped up on Google was Ketchup, so apparently Google knew, but I didn't
Cheers,
Steve
look at the difference from just 10 or 15 mins in a ketchup pool.Seriously, i mean who knew? Then I was looking for other options for funsies and the first thing that popped up on Google was Ketchup, so apparently Google knew, but I didn't
Sent from my SM-N920T using Tapatalk