Post your builds

[Rommel]

Thanks. Loving these 26650 Sonys i managed to find. Supposed to be 50 amp continuos.

 

[lawnguy]

Similar I guess, I never thought of that

 

[Justin B.]

The build I posted went like a dream all the way to 180w / 10.4v


Sent from my iPhone using Tapatalk

So I finally got it 24g kanthal 14 wraps 180 watts and wow! lol so much flavor and the clouds oh my the clouds!! Lmao thank you again Franciscan

 

[MKPM]

You are quite welcome! Enjoy

 

[High On Octane]

My latest build; Triple twisted 28g wire, 4 wrap 7/64" coils @ .25 ohms.

 

[Justin B.]

You are quite welcome! Enjoy

Hey one question though. On your post you said 180watts/10.4v do you know why I would only be at 10v? I got to 180watts but only 10 volts. Any thoughts?

 

[MKPM]

I reached those numbers on a .5'ish ohm build.

 

[Brian33]

Hey all, I know it's been a while since I've checked in, figured you'd be sick of seeing the same 4/5/6 wraps of 20g around a 3/32nds in different atomizers hahaha.
So here's something actually new and interesting! My first build on my fantastic new series box built by Andy Bader of XRayBoxMods;
View attachment 9070
Dual 10-wrap of 22g Kanthal A1 around a 3/32nds, ohm'ing to .32 in the Doge.

I want to try this build today for a cloud comp at a local shop. I dont have any drill bits. Is there any other things i can wrap em around with? I have screw drivers but they are numbered 1.5mm 2.0mm 1# 2#. Please help.
Same atty too.

 

[Rommel]

There are several ways to convert mm into inches just google.

 

[MKPM]

There are several ways to convert mm into inches just google.

I personally prefer the purpose designed vacuum pump method. Wait, we are talking about something else?


Sent from my iPhone 6 using Tapatalk

 

[Rommel]

I personally prefer the purpose designed vacuum pump method. Wait, we are talking about something else?


Sent from my iPhone 6 using Tapatalk

No, you're right on topic sir. Cant play pool with a noodle.

 

[MKPM]

Lol, we'll played!


Sent from my iPhone 6 using Tapatalk

 

[Iamme]

I want to try this build today for a cloud comp at a local shop. I dont have any drill bits. Is there any other things i can wrap em around with? I have screw drivers but they are numbered 1.5mm 2.0mm 1# 2#. Please help.
Same atty too.

I don't have a drill bit set. I use all kinds of stuff. Paperclips, the center post from a cobra atty that sucked so I ripped it apart, screwdrivers. All kinds of random stuff and it works well. You can use nails (clean and not rusty lol) you Nam it. The cheap mini screwdrivers that come with all the attys work well for a lot of builds.

 

[samjoseph1024]

Awesome shooting....

 

[Brian33]

quads. 5/6 wraps. Cant find ohm reader

 

[Iamme]

.4ohm dual 13 wraps each on a cheap atty screwdriver with 24 GA wire.

Crappy phone pic

 

[lawnguy]

Triple coil on my stilliare dripper .39 ohms. 10 wraps per coil #0 Phillips head screw driver.
I call it the Flux Capacitor.


Now rebuild kayfun chimney coil with 26 guage to mate with 15 watt dovpo elvt only capable of firing down to 1.3 ohms.

The old coil was much bigger than the new coil going from 1.1 ohms @ 13 wraps around a 3mm post now to 26 guage 12 wraps around a #0 Phillips at 1.61 ohms.

The new coil packed like the old coil. A safer build with more room in the kayfun chimney for the coil. There is still much more airflow than a stock wrap.

 

[smacksy]

Because I run 26650 mods I really like the 28.5 mm Stillare shown here with a simple dual parallel 26g build..drilled out the hole under the drip tip to 5/16" that really helped with airflow and blowing serious clouds.. It doesn't get too hot either at only .14 ohms..

from Droid Maxx using Tapatalk

 

[JDM_Justin]

I'm still pretty new to the vape scene so any feedback would be greatly appreciated. This is my latest build inspired by another build I have seen here. I had been getting some scorching on my cotton on the right side of my previous builds. I assume it was due to how close it was to the side of the RDA deck so I moved them more towards the middle and it seems to have fixed the issue.

 

[bluecb7]

First build, 26g kanthal, 9 wraps around a 3/32 drill bit, comes in at .56ohms

 

[Justin B.]

28g twisted kanthal 11 wraps on 3mm sd .69 ohms. Sitting on a Mutation V2 Rayon wick 95 watts 8 volts on a God Box

 

[rdwilliamson]

Everyday build. Dual 28g

26g wrapped with .8 ribbon wire

Sent from my educated phone using tapatalk

 

[travanx]

Finished replumbing our kitchen! So I needed something really simple. 26g, 8 wraps, blue screwdriver (1ohm) on a Lemo.

 

[T702]

Custom Delrin cap/tip for tobh quads on custom 26650 bottom feeder, media blasted finish

22ga quads Netting 0.3ohm

 

[lawnguy]

New quad coil build on my plume veil rda vaping @ 50 watts .31 ohms on ipv v2.
Smooth as heck and tasty with 90/10 vg juice. 6mg nic.

 

[Rommel]

There. Tried flattening but they have a tendency to pop if not hammered 110% evenly.

 

[Brian33]

View attachment 9589 quads. 5/6 wraps. Cant find ohm reader

.02 was the ohms

 

[MKPM]

The "I bought this fucking 454 Big Block and all I get is clouds and no flavour" build
6 wraps of 24g @ .2 ohms

Sorry that it's blurry....the iPhone 6 camera is ace...but still not quite up to close up photos.

Even though it is a dual....with the four air holes it still produces impressive vapour without much sacrifice of great yumminess. I am vaping "Grilled Pineapple" from GNS Vapor and I am NOT unhappy with this build.

 

[hondo701]

First dual coil build. Orchid V3 with 30 gauge kanthal, 8 wraps around the screwdriver (2 mm?) for just over 1 ohm. Trying some Crunkberry from Alice in Vapeland right now at 19 watts. Its working well except for the fill issue, but that story is for another thread . . .

 

[Rommel]

Nicely done to be your first dual

 

[Rommel]

All day setup on my Tugboat V2. 0.44 ohms, smooth as silk warm-ish vape.

 

[Rommel]

Zipper. Single coil setup came out at 0.14 ohms, thats something new. Taste is great, even in Mutation X.

Edit: duals 0.05 ohms. Perhaps the best cloud chasing coils i ever built.

 

[lawnguy]

Now I have a conversation piece......lol

 

[BenJammin]

Keep in mind this is only my second day dripping

Nemesis Mod with Dark Horse RDA w/ 28g dual coil 8 wraps.



Vaping to help quit dipping. Gotta have that nicotine

Current: Nemesis Mod w/ Dark Horse RDA

2nd: Vamo V5 w/ Pro Tank 2 | Pro Tank 3

1st: EGO-C Twist 1300mAh VV w/ Pro Tank 2 | Pro Tank 3

 

[Cloud79]

I didn't count the wraps on this but it turned out at 0.6 ohms on a 1/8" bit. Parallel coil in the ehpro kayfun version whatever with 2 air holes.

This one was 8 wraps, parallel also, on a 14ga syringe. 0.7 ohms. Both of these were 26ga kanthal wire.

Comparing these two, the 1/8" bit made for a way better vape all around. The smaller diameter was very hot and little vapor prod.

 

[MKPM]

Now I have a conversation piece......lol

Nice cock!

 

[lawnguy]

24 guage 1.4mm mini coil .54 ohms + 24 guage 3mm macro coil .54 ohms = .27 ohm uneven duals. Want to see if it brings out flavor plus clouds.

 

[hondo701]

24 guage 1.4mm mini coil .54 ohms + 24 guage 3mm macro coil .54 ohms = .27 ohm uneven duals. Want to see if it brings out flavor plus clouds.

Interesting concept. Do the coils heat evenly or is one taking off before the other?

 

[lawnguy]

The big one is just not turning red as fast. It starts heating at the same time. It is the flavor coil. The small one is the vapor coil.
It does work. Although my quad with minicoils puts out 2x the flavor. Same clouds.
The point of the build is to have 2 different temperature coils with the same resistance.

 

[Rommel]

BOOOM!

All day setup for Magma. Naturally i used 22 gauge, the best gauge in the world. Hot vape, brings out every detail in my custards and pastry flavors.

 

[Bambua]

Fused Clapton at 0.43, it's a single coil around 1/8" center, 2x26 gauge kanthal wrapped with 32 gauge. Amazing flavor and nice vapor generation:

 

[T702]

BOOOM!

All day setup for Magma. Naturally i used 22 gauge, the best gauge in the world. Hot vape, brings out every detail in my custards and pastry flavors.

If you order a couple 12ga needles they fit in the air holes in the deck, put em' in and cut them off sticking a couple mm off the deck, your magma will never leak again works great.

 

[Rommel]

If you order a couple 12ga needles they fit in the air holes in the deck, put em' in and cut them off sticking a couple mm off the deck, your magma will never leak again works great.

Thanks for the advice!

 

[T702]

No prob bud, I used to hate/ talk shit about and at, my magma, it's way better now.

 

[Iamme]

Wish the top coil would have came out as mice as the bottom. I squeezed it about 10 times it just would not come together. It capes well though, so I wasn't going to wrap a new set.

 

[Cloudz4Days]

Wish the top coil would have came out as mice as the bottom. I squeezed it about 10 times it just would not come together. It capes well though, so I wasn't going to wrap a new set.

Not a bad looking set tho. When you wrap, keep constant tension on the wire. What's the ohmage? About .15ish?

 

[BenJammin]

Wish the top coil would have came out as mice as the bottom. I squeezed it about 10 times it just would not come together. It capes well though, so I wasn't going to wrap a new set.

After attaching to atty, get coils red hot then release button, immediately take a set of needle nose and squeeze them together being careful not to overlap any of the wraps... tada!

 

[BenJammin]

TR mod/Dark Horse atty with double twisted 32g wire coils

 

[CaFF]

Nothing special here, just a quick 'n dirty build on my new Veritas clone RDA.
I don't have many mods to match it, so figured I'd throw it on my SVD with a build to match.

So, it's 2.4 ohms worth of 30 gauge, 7 wraps on a 2.4mm screwdriver and wicked with Tencel fiber Cotton. (nixed the Tencel. - wanted to use it, but wasn't working as well as I'd like)

Ya, I need to squish that left side wind over a bit...oops.




I like it...




No, not giants clouds, but I can't lung-hit stuff anyways.
Great flavor, which is what I wanted, and a pretty good cloud...for me...lol
Using 20/80 DIY Eggnog w/ a touch of Clove @ 18mg

 

[muth]

Nothing special here, just a quick 'n dirty build on my new Veritas RDA.
I don't have many mods to match it, so figured I'd throw it on my SVD with a build to match.

So, it's 2.4 ohms worth of 30 gauge, 7 wraps on a 2.4mm screwdriver and wicked with Tencel fiber Cotton. (nixed the Tencel. - wanted to use it, but wasn't working as well as I'd like)

Ya, I need to squish that left side wind over a bit...oops.




I like it...




No, not giants clouds, but I can't lung-hit stuff anyways.
Great flavor, which is what I wanted, and a pretty good cloud...for me...lol
Using 20/80 DIY Eggnog w/ a touch of Clove @ 18mg

Spooky