I believe it. Those are coil porn worthy for sure.
Become a Patron!
Post your builds
- Thread starter Vape_geek
- Start date
11 wraps
11 and 2 half wraps make 12. Maybe I'm wrong though
Sent from my Nexus 6P using Tapatalk
Edit oh my bad you're right. I counted eleven the first time. But it's 10 and 2 halves
I love it! Noisy Cricket Fo Lyfe!
12/11 lol, but hey who's counting? Anything over 8 wraps and I call it "a fuckton of wraps for a series mod"
Just one half wrap I think, 11 full wraps then one more half to make the leads face the same direction
Last edited:
So damn confusing to me some times. I spent 2 years wrapping one less for counting the first half as a wrap. Ugh
Sent from my Nexus 6P using Tapatalk
@Pegleg Meg
You’re right, it’s a fuck ton of wraps but the flavor and cloud production is pretty damn good. Lots of surface area.
You’re right, it’s a fuck ton of wraps but the flavor and cloud production is pretty damn good. Lots of surface area.
I used to use a 12/13 wrap claptoned 0.5 ribbon build on my Kennedy Trickster 24(2 post) and Noisy Cricket...with no cotton lol, fuckton of wraps held That Much juice (for one, incredibly thick, cloud)
Last edited:
I'm proud of this one stapled staggered fused clapton .3 ribbon framed 28g fused with 40g.
I'm proud of this one stapled staggered fused clapton .3 ribbon framed 28g fused with 40g.
nice work @Locomotion 40gauge fuse is hard 
nice noisy cricket build @Tanker i am partial to 2x28ka1 fused claptons for a smaller series build. i like it around .4 (a hair lower), but its easy to mellow out with an extra wrap or two.
nice noisy cricket build @Tanker
i am partial to 2x28ka1 fused claptons for a smaller series build. i like it around .4 (a hair lower), but its easy to mellow out with an extra wrap or two.
I don’t think I could ever vape on a series mod again without a series rda... those things are heavenly ... I really wish a few more would be released.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
KingPin!
In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
the gods accepted my meager tribute and showed the oracles their will, and the oracles determined it to be this:
6 x .4mm/38 4 x .4mm/2x26/38 .06 on quad parallel
@Fleshgod
shoutout to @raymo2u this is my first build with the clamps and they are fuckin sweet man. i cant wait to see whats next
6 x .4mm/38 4 x .4mm/2x26/38 .06 on quad parallel
@Fleshgod
shoutout to @raymo2u this is my first build with the clamps and they are fuckin sweet man. i cant wait to see whats next
Last edited:
the gods accepted my meager tribute and showed the oracles their will, and the oracles determined it to be this:
6 x .4mm/38 4 x .4mm/2x26/38 .06 on quad parallel
View attachment 103336
View attachment 103337
@Fleshgod
Rahhhhh!!! F yeah!
thats pretty much what i said when i sat up from fusing the second pass of this and seeing it was clean
its funny, if you get the angle right, you can go as fast as you want. if you make a mistake and stop/rewind, it takes like 10 mins to go an inch to get it all cleaned up and find the groove again. i made 9 inches in total and i swear 90% of the time i spent on the second pass was for about 3 different inches 
Sexy as Fuck. Well done Mack1ne. Impressive dude!the gods accepted my meager tribute and showed the oracles their will, and the oracles determined it to be this:
6 x .4mm/38 4 x .4mm/2x26/38 .06 on quad parallel
View attachment 103336
View attachment 103337
@Fleshgod
CrazyChef v2.0
Gold Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Reddit Exile
VU Patreon
Dude!!! I used to be on the Oracle mailing list many, many moons ago! Is it still around? I'm gonna hafta do a Google search right now...
if you are referring to the oracles that specialize in database technology, then this is not the same mailing list. these oracles mainly use mountaintop signal fires and freaky visions to communicate. they only recently got a mail server set up as well. way late to the party on that one.
CrazyChef v2.0
Gold Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Reddit Exile
VU Patreon
The Usenet Oracle, not the database behemoth.
ahh shit i forgot about that oracle. lol i cant imagine what answer i would have got from them on what to build for this thing
KingPin!
In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
the gods accepted my meager tribute and showed the oracles their will, and the oracles determined it to be this:
6 x .4mm/38 4 x .4mm/2x26/38 .06 on quad parallel
View attachment 103336
View attachment 103337
@Fleshgod
shoutout to @raymo2u this is my first build with the clamps and they are fuckin sweet man. i cant wait to see whats next
Damn that’s a fine build mate!!
8x0.3 + 28 frames/40 Kanthal D
5.5 wraps 3mm
Lucky 0.13 ohms
It looked better with my eyes than with a camera, not too bad though
*passes out from cloud overdose*
I tested out the 46 on one strand of 28 for a MTL build, tried to take a picture...my eyes can't see wraps and neither can my camera
5.5 wraps 3mm
Lucky 0.13 ohms
It looked better with my eyes than with a camera, not too bad though
*passes out from cloud overdose*
I tested out the 46 on one strand of 28 for a MTL build, tried to take a picture...my eyes can't see wraps and neither can my camera
Last edited:
the gods accepted my meager tribute and showed the oracles their will, and the oracles determined it to be this:
6 x .4mm/38 4 x .4mm/2x26/38 .06 on quad parallel
View attachment 103336
View attachment 103337
@Fleshgod
shoutout to @raymo2u this is my first build with the clamps and they are fuckin sweet man. i cant wait to see whats next
DAMN! That is sick dude!! Awesome job!
Practice makes perfect
CrazyChef v2.0
Gold Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Reddit Exile
VU Patreon
Wow that's cool lookingAbsolutely! Here's a variant I call the gatortail coil
Sent from my Nexus 6P using Tapatalk
@CrazyChef v2.0 that gator tail coil looks like its got a weird photoshop filter on it or some kind of under water thing going on. i had to open in a new window and zoom in a little to 'get over it' and see it properly wild
wild
I'd hit that shit!
Wow, just wow!Absolutely! Here's a variant I call the gatortail coil
Attachments
CrazyChef v2.0
Gold Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Reddit Exile
VU Patreon
Here's a couple better shots. It's pretty easy to make. It takes a few wraps to catch, but once it does it's pretty easy going after that. Gotta angle the outer wire forward a bit like wrapping an alien. Also works best with 40g or thinner wire.@CrazyChef v2.0 that gator tail coil looks like its got a weird photoshop filter on it or some kind of under water thing going on. i had to open in a new window and zoom in a little to 'get over it' and see it properly
Sorry for the blurry pic:
3x28/36 Ni80 Aliens
2.5mm ID, 6 wraps
0.16 ohms
Running on Reload RTA
Twisted outer huh, nice! Is the benefit heat, more nooks and crannies, both? Nice coils man
My fav build it's too hard to believe anything vapes better than this build.I haven't done nichrome yet though.
Man, there are some seriously sexy builds happening today. 4X porn, lol. I need to get off my ass and start making my own wire.
The only thing fancier I sometimes make is a staple staggered fused clapton and the flavor on those is tits, but they are wide as hell and I don't always feel like vaping my tits off all the time lol. I highly recommend Nichrome man, super quick ramp up time.
Here is one of the coils with a better shot. Not amazingly perfect but they work fine for me.
nice! thats the first time i have seen the cores for that. i always thought it was a twisted ribbon stack that was hammered out and claptoned. very cool build
@Ishkabibble those look pretty perfect to me
I'm vaping on it now it wasn't what I was expecting great vapor production hands down but the flavor is right under the 3 core aliens imo.
The staple staggered fused clapton? What device you have it on? Hey flavor is totally subjective anyway!
Reuleaux rx300 flavor is exceptional I might just be stuck on the aliens.lol vgod rda that bottom air flow is something serious.
Staggertons are up next i ran out of ribbons.FML
I see nothing wrong with that coil. They do say that the one most critical is yourself.
KingPin!
In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
Thanks Ishka
well I’ve found two things: is a little spitty with the bare twisted wire and it takes a little longer to heatI think it more for looks than practicality although it still kicks out plenty of flavour and cloud
Lovely Alien by the way!! Nice work
2x26 with 46, different color stages, light blue/green is first, then gold, then purple, then...looks like a rainbow, depending on the lighting
My phone can't handle this lol
It actually seems like the thinner the wire, the farther behind the wrap I can hold the spool - this kept going forward until I was like 10 degrees or more Behind where it was wrapping
My phone can't handle this lol
It actually seems like the thinner the wire, the farther behind the wrap I can hold the spool - this kept going forward until I was like 10 degrees or more Behind where it was wrapping
Last edited: