Become a Patron!
Post your builds
- Thread starter Vape_geek
- Start date
Where the builds at??
More practice stagger fusing
More practice stagger fusing
Hyuuuuuj. Look at these hands. Lol.
40g aliens are really cool, they look “gooey”. Awesome!
Good job man. That's my damn unicorn right now. Got one made a while back and can't get it to cooperate again. LolWhere the builds at??
More practice stagger fusing
Sent from my Nexus 6P using Tapatalk
Here are a couple of all N80 dual frailens at .08 ohms for a friend. 26g/.5 (4ply)/36g.
Our staff's Vertebraid is real beauty
6x26g n90 wires, 5 loops on 3.mm guide .12ohms
6x26g n90 wires, 5 loops on 3.mm guide .12ohms
Stagger practice. The staggered 24g in the middle didn’t quite grab the fuse like I thought it would. I wanted to add on more set of frames and fuse again but I could tell It wasn’t gonna work out this time. This 36g seems huge after using 40g!
KingPin!
In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
Our staff's Vertebraid is real beauty
6x26g n90 wires, 5 loops on 3.mm guide .12ohms
That takes some going braiding like that with 26g was the staff member leaning back at the time to keep it tensioned?
KingPin!
In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
hahahaha
My colleague has technique for tightening his braids as much as possible
KingPin!
In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
My colleague has technique for tightening his braids as much as possible
Uses a car and a tow bar or something?
Brad731962
Member For 1 Year
. I would def use it
I'm going to try new builds tomorrow through Sunday, help me decide which one first??
- Razorbacking ribbon
- Enigmas/hedgehogs
- Pitchfork
Kanthal is the only wire that doesnt make me ill
- Razorbacking ribbon
- Enigmas/hedgehogs
- Pitchfork
Why not for vaping ?. I would def use it
Sent from my iPhone using Tapatalk
Kanthal is the only wire that doesnt make me ill
KingPin!
In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
Enigma ..themz my favourite coil porn
other than slentresPlus we haven’t seen them for ageeees
Need a meg special pick me up
What exactly is Razorback? And is there a difference between hedgehog and enigma?
Enigmas have one bump, hedgehogs have more than one
Enigma:
Hedgehog: (this one is also stitched, I've heard that makes it easier to line it up)
Razorbacking is claptoning ribbon across the thin side instead of the wide side, then you can alien it, mohawk, enigma or hedgehog or whatever:
And this is a stitched razorbacked hedgehog *faints*
Yeah my IG avatar is a rainbow unicorn lol
KingPin!
In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
Oh that’s what they’re called lol I recall my post then! hedgehog plzzzz haven’t seen one in ageeeees
Haven’t built one in ages last one I built was for the Pharoah dripper it’s pretty rowdy!
KingPin!
In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
Wow, kingpin!!! Hedgehog it is, then - it has the cutest name, too
Hehe ...That stitched razorback hedgehog is something else...the mind boggles
Reckon you can pull that one off?
Also mine wasn’t proper enigma cause I didn’t stich it ...I’m useless with stitching coils
Proper enigmas dont have to be stitched - stitching is an add-on
a guy did tell me stitching helps with the wrapping, though, may be why its so common
KingPin!
In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
Proper enigmas dont have to be stitched - stitching is an add-on
Woohoo I pulled off a proper enigma
KingPin!
In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
and to think all this time I didn’t actually know it’s name lmao
One of them thingamy jigs
It could be that nobody called them hedgehogs when you made it - builders come up with new names for things sometimes
KingPin!
In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
Here are some dual 5 28g core aliens binded with 36g extra wavy. This is the third pair in a 5 pair package I’m sending out.
Made a pair of 4x28/36 aliens, n80 .11 ohms
An alien, 6x30/36
And hammered vertebraid for a friend 6x32
An alien, 6x30/36
And hammered vertebraid for a friend 6x32
As my son would say, Thank You Much
Now for some Wide Loads
28g Frames, 6ply .3R, .3x.3 Square Wire, 5ply .3/46g Staples, 42g Stagger and Fuse
30mm Mask RDA
Awesome. Your Golem rda going to be able to fit coils like that too?
The golem fits more than what the cap will allow, the same sized coils have been fit in the Golem with the cap on and its the only RDA I have that could fit them, the Warrior RDA seems to be a large contender....I love that one also.
28g Frames + 17ply .3R Mass with room to spare. The thing is with the Golem, you can put the coils anywhere on the bar, no screws or anything to hinder what width your coil is. I always found the screws on the goon were always where my larger coil's leads needed to go and there hasn't been a RDA that had the room where those spots were available unless it was 30mm.
I will have builds for my @WotofoOfficial Warrior RDAs soon also, but for some glamour shots.
Last edited:
Little build in the Wotofo Warrior. I really dig this rda!
Sent from my SM-G965U using Tapatalk
Sent from my SM-G965U using Tapatalk
Vertebraid, 7-loop 32g SS
I dont know if these are hedgehogs, they have 3 bumps more often than two, but I like em, looks like alligator backs
Gonna be fun to photo stack and color, two are SS and the middle one is kanthal, all stitched with the other alloy
Gonna be fun to photo stack and color, two are SS and the middle one is kanthal, all stitched with the other alloy
Last edited:
Daaayum that’s fn awesome. You just leveled up for sure lol. I gotta know, core width and decore gauge? Those look so cool. Lay down some baby aliens in the gaps and go supersonic! For real though, you’re a coilsmith extraordinaire
KingPin!
In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
Little build in the Wotofo Warrior. I really dig this rda!
Sent from my SM-G965U using Tapatalk
You make them Dave or bought them?
KingPin!
In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
Meg that’s fantastic! Lovely pics my kinda coil coil porn for sure
Simply gorgeous Chris! The work that goes into making braids makes them extra special in my book love seeing them
One of the guys from a local shop made a few for me. I'm not gonna take the credit here as I dont go too far outside basic claptons
Sent from my SM-G965U using Tapatalk
It was 30g decore, and 1.5mm width - 7x.4 with 26g frames - I'm going on idea that decore should be about 1/6th width of the stick, pretty sure height matters too but havent tried .3 and 28g frames yet to test it
Lmao
KingPin!
In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer