Become a Patron!

Squonkers are Bonkers

Ellipsis

Ellipsis

Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Train said:
I did REDUCE the whistle with a coil angle change, and CAREFULLY lining up the air.
But it's still there...

Heck for a few minutes, I ran it with the outer air slots over the big gap instead of where they should go - still blows on the Z-coil, but that seemed kind of lame - losing the tightly "aimed" air.

And hell, on a NarDa clone, I took a needle file to the outer holes, tried to give them a little taper. That might work, but my file is shit. And I really don't want to do that to my Legit NarDa - ezpecially as that one's the cool media-blast finish. I might pick up a better file and try that on the clone again. I wouldn't mind actually opening the air a tiny bit anyway...
Click to expand...
that was my thought also ...use a set of jewelers files to, blend the edges on both the base and the top cap...kinda like the m atty, but, less severe
 
midknight420

midknight420

VU Donator
Gold Contributor
Member For 4 Years
I was talking to my dad today and we were looking at the Geyscano atty. We were thinking of taking a drill bit or something and opening up a second air flow hole o.k. the other side for a dual coil build. Thoughts and concerns on this?

I'm not crazy, my mother had me tested.
 
AlbyKortoona

AlbyKortoona

VU Donator
Gold Contributor
Member For 4 Years
Member For 3 Years
ECF Refugee
I just have ChiNardas, but they also whistle. Placing the airhole slightly offcenter to the base hole quiets it down. Grab and twist the cap while drawing a hit and you can find a happy spot of enough air and minimal whistle. I tried chamfering the outer edge of the cap holes with little effect.
 
JuicyLucy

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
John Starz said:
I absolutely want that after seeing it, unfortunately unless its like $20-$30 il never be able to get it.so tired of being poor, I'm already donating plasma just to buy E-juice ><
Click to expand...

How come you don't start DIY?

You can get in on the cheap without buying gallons of nic and tons of this and that

The savings are incredible and once you find your recipes commercial juice is usually disappointing
 
John Starz

John Starz

Silver Contributor
Member For 3 Years
Member For 2 Years
ECF Refugee
JuicyLucy said:
How come you don't start DIY?

You can get in on the cheap without buying gallons of nic and tons of this and that

The savings are incredible and once you find your recipes commercial juice is usually disappointing
Click to expand...
everytime I start saving to buy what I need I end up out of ejuice and needing to buy more lol.
 
JuicyLucy

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
You can get 125 mls of 24mg nic at MFS for only $7.99

pg and vg are even cheaper. You can start there and work your way up to larger sizes in bigger concentrates with the savings
 
Lyspaere

Lyspaere

Member For 4 Years
JuicyLucy said:
You can get 125 mls of 24mg nic at MFS for only $7.99

pg and vg are even cheaper. You can start there and work your way up to larger sizes in bigger concentrates with the savings
Click to expand...

Could even get radical and begin vaping unflavored nic base, just to get the savings-train rolling. Then all the stops get pulled out. I'm amazed what people pay for "premium" juices at B&Ms, after DIYing for a year now
 
John Starz

John Starz

Silver Contributor
Member For 3 Years
Member For 2 Years
ECF Refugee
dang i def didn't do enough research, i was looking at thos kits for like $70.
can you post those links? il look up some recipes, id like to find something similar to Spider Monkeys Howler ejuice, i love that stuff.
 
JuicyLucy

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Lyspaere said:
Could even get radical and begin vaping unflavored nic base, just to get the savings-train rolling. Then all the stops get pulled out. I'm amazed what people pay for "premium" juices at B&Ms, after DIYing for a year now
Click to expand...

Yeah, that $7.99 for 125 ml of 24 mg will make 500 mg of vapable unflavored juice at 6 mg.

1000 at 3 mg.

pg and vg are also cheap and available all over. Heck, most flavor concentrates can be had in small amounts for $1.99

myfreedomsmokes.com
 
John Starz

John Starz

Silver Contributor
Member For 3 Years
Member For 2 Years
ECF Refugee
Lyspaere said:
Could even get radical and begin vaping unflavored nic base, just to get the savings-train rolling. Then all the stops get pulled out. I'm amazed what people pay for "premium" juices at B&Ms, after DIYing for a year now
Click to expand...
and a year from now il be saying that same thing lol
 
John Starz

John Starz

Silver Contributor
Member For 3 Years
Member For 2 Years
ECF Refugee
JuicyLucy said:
Yeah, that $7.99 for 125 ml of 24 mg will make 500 mg of vapable unflavored juice at 6 mg.

1000 at 3 mg.

pg and vg are also cheap and available all over. Heck, most flavor concentrates can be had in small amounts for $1.99

myfreedomsmokes.com
Click to expand...
tyvm
 
JuicyLucy

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
John Starz said:
dang i def didn't do enough research, i was looking at thos kits for like $70.
can you post those links? il look up some recipes, id like to find something similar to Spider Monkeys Howler ejuice, i love that stuff.
Click to expand...

There are tons of seller and prices are all over the place.

I just always check myfreedomsmokes first because they are *usually* the least expensive.

You don't have to use elaborate or fancy "things" to get started like syringes, scales, and expensive measuring beakers.

There are even methods were you make the recipe using drops so you could technically get away with buying only nic, pg and vg
 
midknight420

midknight420

VU Donator
Gold Contributor
Member For 4 Years
Also mixing by weight is the cheapest route and easy to do. Can find a scale at Amazon.com for like $14. Just make sure it measured down to .01 grams. Been mixing like that for about 5 months now @John Starz

I'm not crazy, my mother had me tested.
 
JuicyLucy

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
midknight420 said:
Also mixing by weight is the cheapest route and easy to do. Can find a scale at Amazon.com for like $14. Just make sure it measured down to .01 grams. Been mixing like that for about 5 months now @John Starz

I'm not crazy, my mother had me tested.
Click to expand...

Drops method or syringes is cheapest if you have to buy a scale
 
Lyspaere

Lyspaere

Member For 4 Years
Mixing by weight is the most consistent. Drop size can vary between droppers.

Remember: PG is 1.036 g/mL, VG is 1.261 g/mL, and flavors are pretty much 1 g/mL
 
Last edited:
JuicyLucy

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Lyspaere said:
Mixing by weight is the most consistent. Drop size can vary between droppers.

Remember: PG is g/1.036mL, VG is 1.261 g/mL, and flavors are pretty much 1 g/mL
Click to expand...

Not saying it isn't a great method - just pointing out it's not the least expensive way to begin if you are truly needing to begin using the absolute cheapest method.
 
Tamer El-Meehy

Tamer El-Meehy

Silver Contributor
Member For 5 Years
Tom (Catfish Atty Mods) is running a list for the M Atty clone on ECF (don't know if he's running it on his FB page). IMHO this is one of the best atties out there. Good airflow, easy to build and wonderful flavor. For less than $50, this is a very good deal.

NB: The M atty is nicknamed the Hype.


Sent from my iPhone using Tapatalk
 
Ellipsis

Ellipsis

Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Tamer El-Meehy said:
Tom (Catfish Atty Mods) is running a list for the M Atty clone on ECF (don't know if he's running it on his FB page). IMHO this is one of the best atties out there. Good airflow, easy to build and wonderful flavor. For less than $50, this is a very good deal.

NB: The M atty is nicknamed the Hype.


Sent from my iPhone using Tapatalk
Click to expand...
@Tamer El-Meehy link please ...dont see it for the matty on either...i would love a second one
 
Hank F. Spankman

Hank F. Spankman

Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Catfish Atty Mods Chapter 3

Hype clone Interest list. The authentic is out of production and has been since April 2016. This has zero effect on the modder as he sold out long before the first clone emerged. IMO this is a guiltless clone. Standard clone rate applies $45. Who is in?

1. Tamer El-Meehy
2. tpedwards x2
3. Squonkoholic
4. HeiSINberg
5. puffon

https://r.tapatalk.com/shareLink?ur...hare_fid=4111&share_type=t&share_pid=18231095
 
Ellipsis

Ellipsis

Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Hank F. Spankman said:
Catfish Atty Mods Chapter 3

Hype clone Interest list. The authentic is out of production and has been since April 2016. This has zero effect on the modder as he sold out long before the first clone emerged. IMO this is a guiltless clone. Standard clone rate applies $45. Who is in?

1. Tamer El-Meehy
2. tpedwards x2
3. Squonkoholic
4. HeiSINberg
5. puffon

https://r.tapatalk.com/shareLink?url=https://www.e-cigarette-forum.com/forum/index.php?posts/18231095/&share_tid=733995&share_fid=4111&share_type=t&share_pid=18231095
Click to expand...
lol...was just comng back on to say...nevermind, found it...thanks @Hank F. Spankman
 
Train

Train

Gold Contributor
Member For 5 Years
I've gotz one o those.
I actually set it aside, playing with Nardas and Nuppins and a Pancake, but all this talk about 'em, I popped it back on. And it's good!!
Lol.
I got a JMK tip for it. Kinda pricey, but I really wanted it - slightly different bore, and it fits snugger in the top than the stock tip - which is kinda loose. Loose in a good way if you're popping it off to drip - but I don't drip, I squonk.
:D

Hype2.jpg (also, the mod in this photo is fer sale....just sayin')



Tamer El-Meehy said:
Tom (Catfish Atty Mods) is running a list for the M Atty clone on ECF (don't know if he's running it on his FB page). IMHO this is one of the best atties out there. Good airflow, easy to build and wonderful flavor. For less than $50, this is a very good deal.

NB: The M atty is nicknamed the Hype.


Sent from my iPhone using Tapatalk
Click to expand...
 
The.Drifter

The.Drifter

Bronze Contributor
Member For 4 Years
Just drifting by to drop a pic :D

tcy7xcsa1d10w506g.jpg
 
Hank F. Spankman

Hank F. Spankman

Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Train said:
I've gotz one o those.
I actually set it aside, playing with Nardas and Nuppins and a Pancake, but all this talk about 'em, I popped it back on. And it's good!!
Lol.
I got a JMK tip for it. Kinda pricey, but I really wanted it - slightly different bore, and it fits snugger in the top than the stock tip - which is kinda loose. Loose in a good way if you're popping it off to drip - but I don't drip, I squonk.
:D

View attachment 57199 (also, the mod in this photo is fer sale....just sayin')
Click to expand...
What is it?
 
Train

Train

Gold Contributor
Member For 5 Years
Yeah - it's a MyMod.
The only issues, I noted clearly when I posted "over there" -

I think it needs a better insulator - though most folks are fine, a few got shorts - dead short at the 510, from tightening on an atty. The fuse pops just as it should though. And the battery is held OK, but not tight - could use a spring. I just set the negative screw so that the battery's got no rattle room...

Other than that - the fire button and finish and squonk tube/pin - all awesome...
 
Train

Train

Gold Contributor
Member For 5 Years
Anyone have the Vape Street coupon code mentioned in the comments of that vid? For $60 I might have to buy one of these...
:D

NEVERMIND. Found it.


Zaxxaz said:
For those interested in the C.O.V Wraith,Vapin Heathen has a review up.This is the first review I've found.
Click to expand...
 
Last edited:
You must log in or register to reply here.

VU Sponsors

Top