Become a Patron!
Squonkers are Bonkers
- Thread starter DogMan
- Start date
Hope everyone is having a safe and Happy 4th
Not that the brass is shabby one bit but that SS one ... Did you make those drip tips too? They look seamless on those nuppins!
No I didn't make those. They are old school TOBH drip tips I bought a few years back. I agree, they fit the Nuppins perfectly
Had a little time to work on the Clear Poly Cap for my Nuppin, still got to do the slots and polish her up, but so far so good
Lyspaere
Member For 4 Years
Had a little time to work on the Clear Poly Cap for my Nuppin, still got to do the slots and polish her up, but so far so good
KentA
VU Donator
Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
ECF Refugee
Have you noticed a shortage of Stumpy clones?
Fasttech has discontinued them, I found none listed on ebay, & many sites are "out of stock".
Although I've got 4, I wanted to stock up for the deeming.
I love mah nuppins, too...
Just sayin'.
I keep exploring and trying other stuff (Manta, Sapor. Solstice, M-atty...) but I always come back to the Nuppins!
I DO also love Rogues and have been running an 0-16 since I buckled down grabbed one of those before they disappeared...
Just sayin'.
I keep exploring and trying other stuff (Manta, Sapor. Solstice, M-atty...
) but I always come back to the Nuppins!I DO also love Rogues and have been running an 0-16 since I buckled down grabbed one of those before they disappeared...
FT does had plenty of Petri V2 clones. If you haven't tried one of these converted to bf, you're missing a stellar vape.
Hank F. Spankman
Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
I've seen them in 1place on-line, & it was I Canada. I did, however find a place stateside that has authentics
How's the m Atty? I'm considering getting one. Is it better then the origen little? Thr o16 is my daily VapeI love mah nuppins, too...
Just sayin'.
I keep exploring and trying other stuff (Manta, Sapor. Solstice, M-atty...
I DO also love Rogues and have been running an 0-16 since I buckled down grabbed one of those before they disappeared...
View attachment 55913
sent from my droid turbo 2
Hank F. Spankman
Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
I just officially pulled the trigger on a deal for a P67. Pretty happy about it.
I have an M-atty clone. I like it, but I like a couple others better...
The NarDa clone is awesome - available BF'd from Apex.
And I just today got a Pancake clone from 3F vape that is a total surprise.
(a good surprise - it is AWEsome, and I didn't really expect it to be!)
These ALL have more air than an 0-16...
But the NarDa is actually pretty close, and the pancake, you can dial it back...
The NarDa clone is awesome - available BF'd from Apex.
And I just today got a Pancake clone from 3F vape that is a total surprise.
(a good surprise - it is AWEsome, and I didn't really expect it to be!)
These ALL have more air than an 0-16...
But the NarDa is actually pretty close, and the pancake, you can dial it back...
I've looked over there several times but seemingly everything is always sold out.
I looked at those recently and wondered if it would be any good ... what kind of build did you put on it?
Does catfish have any m Atty clones left bf? I refuse to rejoin ecf. Could you find out for me?
sent from my droid turbo 2
Awesome thank you! I hope I can get one soon! Or you can sell me yours and you can get a new one
sent from my droid turbo 2
The clones are damn good, I'm not sure where Tom bought them, but the clone is as good as the authentic which was like 125 bucks if I remember correctly...the clone bottom fed was about 40 I think.Awesome thank you! I hope I can get one soon! Or you can sell me yours and you can get a new one
sent from my droid turbo 2
Sent you his contact info....he's pulling mucho overtime this week, he may not answer immediately like he usually does...tell him I asked you to contact him. If he doesn't have any...ask where you can buy the same clone...I'm sure he'll tell you.
I emailed him and told him inspects sent me
or you can sell me yours sent from my droid turbo 2
Will that top cap fit a Nuppin? Gawd I need a ultem top cap for my NUPPINS!
I was pleasantly surprised with the M atty when I got one from Catfish..I was under the impression that it's another fog machine with little to offer in terms of flavor..boy was I wrong!..it excels on both fronts...the M Atty is definitely airier than the Narda or the Nuppin, and just a tad less than either in terms of flavor.
Looking damn good Drifter..how do they perform with regards to heat?
Just put the slots in this morning so I only have been using it for a hour or so. So far no issues, performs just like the regular V2 Nuppin caps because I used the same dimensions for everything but made it one piece vs two.
I really dont suspect that I will have any heat issues, there is enough clearances everywhere and with the airflow I suspect that the top cap will remain fairly cool
Im sure if I used a bigger ID coil that I might eventually have some issues due to less clearance, but for my 2.5mm ID Nuppin builds, I think it will be fine.
I do like clear caps for squonkers, lets you see the wick saturation at a glance and virtually eliminates over squonking.
Ellipsis
Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Looks gorgeous - I just hope it does not have the annoyances/problems of the mini volt.
Mine are: that dam automatic shutoff and the coating on my mini has been steadily chipping off since I got it.
On the topside - it works like a champ.
Faust
Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Looks nice, anyone heard anything about price on it?
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
I emailed COV a few minutes ago asking price, release date, and if it was going to have that annoying auto shutoff "feature"
Looks great man!!!Just put the slots in this morning so I only have been using it for a hour or so. So far no issues, performs just like the regular V2 Nuppin caps because I used the same dimensions for everything but made it one piece vs two.
I really dont suspect that I will have any heat issues, there is enough clearances everywhere and with the airflow I suspect that the top cap will remain fairly cool
I do like clear caps for squonkers, lets you see the wick saturation at a glance and virtually eliminates over squonking.
Sent from my iPhone using Tapatalk
May sound like a dumb question. How do you open the plastic tops on the Reo 6ml bottles without ruining the cap? They have a hard top on them and I'm hesitating on how to open them up.
Never mind, got it. Pocket knife showed me how.
Never mind, got it. Pocket knife showed me how.
Looks like my next group buy
sent from my droid turbo 2
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
BTW...these happened. I LOVE my SSCCs!
Looking good
Very nice to see other people enjoying CC/Nuppin combos 
I've seen two pre orders for them.One place is $75,the other is $80.The one for $75 will ship on July 11th.
Here is a video COV put up on youtube about the Wraithhttps://www.youtube.com/watch?v=LHmvgzhJuME
Oh. First time I heard of a delay in firing.
Still prefer my mechs. A delay when firing is not something I am accustomed to
Sent from my LG-H815 using Tapatalk
Sent from my iPad using Tapatalk
Ellipsis
Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
im not liking the fact it has the same board as their tempest 200 watt 'er...means while using temp protect you cannot adjust the wattage output...Looks like my next group buy
sent from my droid turbo 2
although its an absolute hoot seein' ya'lls mech bottom feeders and kick ass atty's, i'll just settle for my lost vape halcyons...
good night all...