Become a Patron!
Squonkers are Bonkers
- Thread starter DogMan
- Start date
A search for those didn't bring up much, just a few 3d printed parts. So what's the story please? And when you say you rewicked 4 of your Gdeals, it begs the question; Just how many of those mods do you have? 
Have 8 Alby....you can buy the kits at shapeways.com....or you could anyway, haven't looked lately.A search for those didn't bring up much, just a few 3d printed parts. So what's the story please? And when you say you rewicked 4 of your Gdeals, it begs the question; Just how many of those mods do you have?
Awesome mods ... total shame what happened to George on ECF, basically the same exact BS that they pulled on Roxy and also the same result; a huge loss for ECF.
Your paint schemes looks great on those mods btw!
Last edited:
Indeed, the bullshit they pulled on George was another mod mishap, and they dumped the entire thread. Like a bunch of fucking 8 yr olds playing "Policeman"......
Juice, those mods work alright?
Was going to get a couple from Dre, but never heard of the mod before.
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
I really, really like mine. But I am very fond of mech squonkers.
The body is SOLID and very well machined. Internals simple, very decent quality. Easier to take apart and put back together than say, the REO.A
Hard hitting and more versatile than the REO too.
I can see this still in service in 10 or 20 years.
Dre said a run of brass ones may be coming in a few weeks - a very worthwhile investment in my humble opinion
The body is SOLID and very well machined. Internals simple, very decent quality. Easier to take apart and put back together than say, the REO.A
Hard hitting and more versatile than the REO too.
I can see this still in service in 10 or 20 years.
Dre said a run of brass ones may be coming in a few weeks - a very worthwhile investment in my humble opinion
I see I'm too late for this weeks run....I'll definitely get in on the next one...thanks for the info juice...!I really, really like mine. But I am very fond of mech squonkers.
The body is SOLID and very well machined. Internals simple, very decent quality. Easier to take apart and put back together than say, the REO.A
Hard hitting and more versatile than the REO too.
I can see this still in service in 10 or 20 years.
Dre said a run of brass ones may be coming in a few weeks - a very worthwhile investment in my humble opinion
AngiBe
Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Yes there is! I got it right here!
Sweet! Do you like it?
Hank F. Spankman
Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Yes, yes I do!
I really, really like mine. But I am very fond of mech squonkers.
The body is SOLID and very well machined. Internals simple, very decent quality. Easier to take apart and put back together than say, the REO.A
Hard hitting and more versatile than the REO too.
Hi
Whats the brand name and how much?
Thanks
I can see this still in service in 10 or 20 years.
Dre said a run of brass ones may be coming in a few weeks - a very worthwhile investment in my humble opinion
Hank F. Spankman
Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Could anyone with a Stumpy tell me, will a Trinity Nip Tip fit snugly into it?
The stumpy comes with its wider drip tip and an adapter for standard drip tips. Not sure if that answers your question.
Hank F. Spankman
Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Tyvm! Crisis averted! Goofing around, I discovered a Crispy Caps Flav Chuff fits perfectly, opens up the air a bit on it ta boot.
Last edited:
If you contact me this afternoon I can probably get you one if you hurry.
sent from my droid turbo 2
Okay what is the deal with these metal mechs? Brass even? How much does someone need to pay? Not saying I will yet. I'm hopeful though you'll be able to keep a group buy going. May get there eventually. * goes back to eye balling Lucy's Glacier a'la Mod * That looks sweet.
Ah yeah, damn early old timers. Forgot to ask, got specs? What size juice bottle? Full mech? Takes 18650?
Ah yeah, damn early old timers. Forgot to ask, got specs? What size juice bottle? Full mech? Takes 18650?
No problem squonking that baby...Dre.....Tmod micro moving on up to the high end side
sent from my droid turbo 2
I hope you can get your hands on a batch of SS or AL mechs next time around...if we even have time for another round before nobody is allowed to sell anything.
KEEP STOCKPILING......
In a couple weeks and brass is coming!end of June. Round four thread is open just for numbersNo problem squonking that baby...Dre.....
I hope you can get your hands on a batch of SS or AL mechs next time around...if we even have time for another round before nobody is allowed to sell anything.
KEEP STOCKPILING......
sent from my droid turbo 2
Last edited:
KentA
VU Donator
Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
ECF Refugee
Indeed!
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Bonkers because I buy pairs
Probably addressed elsewhere. What to do if a squonker is not squonking, or you suspect that? I squish the bottle expecting the juice to move up the tube and into atty. Seems atty is dry each time I check the wicking from 'oh my that wretched taste'. Wind up dripping a little from the top. Not why I want to squonk.
SOLVED: Found a reasonable solution. "Hey, dummy top off your sqounk bottle." D'oh.
SOLVED: Found a reasonable solution. "Hey, dummy top off your sqounk bottle."
D'oh.
Last edited:
Morely, you have a bottom feed atty attached?
Kind of a silly question, had to ask.
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
You may need to take the top off your atty and make sure there is nothing inhibiting the juice from coming up onto the wicking.
Happens sometimes.
Yep, I know and I do indeed. Looked on another forum. Someone had mentioned getting to halfway point in the bottle and not tasting the vape. Another mentioned topping off. The most obvious and it works. * chuckles *
LOL Uh huh, yep, yep, yep I know because I was there. LOL "Out you damn silly tiny grub screw!" LOL
Well, this morning the squonk is with me. Have to admit that I am now a full convert to the Dark Side. I enjoy cloudz brah, but also am getting a lot of good flavor from Hawk Sauce. Would imagine that how my kit is set up a balance for any flavor would be easy to find. I am what is considered a moderate, moderate. Enjoy the best of both extremes.
The dual vertical coils are doing well. I did need to make a minor adjustment on the wick though. Cut the top of the wick in two. It seems the excess caused one section of the wick to burn, not enough air to cool the coils properly was getting into the middle. Easy enough fix for that. So now, it is two separate wicks.
Have to admit that I am now a full convert to the Dark Side. I enjoy cloudz brah, but also am getting a lot of good flavor from Hawk Sauce. Would imagine that how my kit is set up a balance for any flavor would be easy to find. I am what is considered a moderate, moderate. Enjoy the best of both extremes. The dual vertical coils are doing well. I did need to make a minor adjustment on the wick though. Cut the top of the wick in two. It seems the excess caused one section of the wick to burn, not enough air to cool the coils properly was getting into the middle. Easy enough fix for that.
So now, it is two separate wicks.
Hope everyone is having a safe and Happy 4th
Hank F. Spankman
Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Same to you & yours DrifterHope everyone is having a safe and Happy 4th
Last edited:
I have one of those but mine was under $60Bonkers because I buy pairs
Solid brass it's got some weight so it can be used as a weapon
sent from my droid turbo 2
I have one of those but mine was under $60
Solid brass it's got some weight so it can be used as a weapon
sent from my droid turbo 2
Yes indeed, they do look similar on the outside if you overlook that button
But that's where the similarities seem to end. The internals are quite different from each other from what I've seen on yours.$60 is not a bad price for what it is and would make a great entry level squonker for anyone who wants to try mechanical squonking out.
It's nice to see squonking becoming available at a better price point, it lets people try squonking without investing too much into something they may or may not like
Hank F. Spankman
Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Well, I'm hooked like a motherfucker now! LOLYes indeed, they do look similar on the outside if you overlook that button
$60 is not a bad price for what it is and would make a great entry level squonker for anyone who wants to try mechanical squonking out.
It's nice to see squonking becoming available at a better price point, it lets people try squonking without investing too much into something they may or may not like
Hank F. Spankman
Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
I can't believe you're not rocking a stumpy on one of them badboysMe too
That's a MyMod by Paul on ECF. Was a thread there for two years helping Paul develop this mod, I managed to get one of the extras. It's considered a "beta" mod (hence the $100 price tag) and has some minor issues but quite functional after some fixes.
Last edited:
Hank F. Spankman
Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
I was curious what atties theses areMe too
I do have quite a collection of bottom feeding atties, including 2 stumpys, but have a preference towards Nuppins
Hank F. Spankman
Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Well, I'm just starting my Squonking journey lol but I do have a Stumpy, & I'd rank it pretty high amongst all the RDAs that I've triedI do have quite a collection of bottom feeding atties too, including 2 stumpys, but have a preference towards Nuppins