Richard, owner of MMUK endorsed these guys on his Facebook page, I need to snatch a few more myself and this looks like the place!
Become a Patron!
Squonkers are Bonkers
- Thread starter DogMan
- Start date
Richard, owner of MMUK endorsed these guys on his Facebook page, I need to snatch a few more myself and this looks like the place!
Sent from my iPhone using Tapatalk Pro
Looks like that bottle cap and the contacts are getting pretty cozy there, no?
I ordered three myself. They have the revision 3 versions. Already got a tracking number 10 minutes after I placed the order.
Sent from my LGMS550 using Tapatalk
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
I bought a Modfather from those guys last year, went fine
Khanninnarh
Member For 3 Years
Looks like that bottle cap and the contacts are getting pretty cozy there, no?
I was wondering if it's ok for the metal strip to be so close to the Stainless Steel bottle cap. Would it cause a short?
I was thinking of getting one myself and I have those YFTK bottles.
Sent from my iPhone using Tapatalk
Last edited:
Not so much a short, the cap is essentially "floating" and not grounded, but there has to be some loss of power going through the cap I would think.
If the cap were touching metal someplace else it could be a bad time though....
Khanninnarh
Member For 3 Years
Thanks for the info.
Was also wondering what kind of wire do u guys use on a Mech like this. I've been using SS316 on the regulated devices I have.
Does the slight fluctuation of Ohms matter if I don't build too low?
Sent from my iPhone using Tapatalk
I've been using 316L on all the RDAs is use on mechs and I've never noticed that fluctuation causing any problems.
Sent from my iPhone using Tapatalk Pro
Same. SS316L all day, every day.
If it fluctuates, I either don't notice that much or just don't care.
I suppose the mech life did that to me.
If it fluctuates, I either don't notice that much or just don't care.
I suppose the mech life did that to me.
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Ditto - been using 316 SS for at least a year now
Khanninnarh
Member For 3 Years
Thanks for the confirmation.
The boxer clone would probably be the next one. As the Icarus and Frankenskull clones are too troublesome for me to modify
Sent from my iPhone using Tapatalk
What kind of builds and what size ss316 are y’all doing?? Thanks
I do fused claptons with 28g core and 36g wrap. I do 6 wraps on a 2.5mm bit and it turns out to be about .34 ohms.
Hardly any ramp up and flavor is awesome!
Sent from my iPhone using Tapatalk Pro
Hardly any ramp up and flavor is awesome!
Sent from my iPhone using Tapatalk Pro
That’s beyond my skill set lol. Single wire or parallel is my limit.
6- wrap snooze fest
24g over 3mm or something like that...
(Hey I fixed the legs on the o-atty coil!)
Some of us still use Kanthal, although we will use SS316 when we can.
* adds a visit to Stu's to his list *Some of us still use Kanthal, although we will use SS316 when we can.
SS just tastes miles cleaner to me, I have a weird metal thing I suppose, that beautiful Damascus cap I have is pretty much useless to me; all I taste is carbon steel
Heads up to my favorite bunch of squonkers...
Budget orca build in the classies shortly....
Budget orca build in the classies shortly....
I have similar capabilities and find it no more difficult to cut off a piece of this off a spool...
https://www.advancedvapesupply.com/...clapton-30gx2-or-32gx3-core-40g-outer-316l-ss
... and do a wrap that a single wire.
Many Thanks again to Juicy Lucy for that wire suggestion
Ron
---
“If you think you can do it, or you think you can’t do it, You are right.” – Henry Ford
I have no idea what drip tip this is from??? I found it in my desk and it worked perfect for the wasp. I think it may have come with the Axiom rta but not sure.
Sent from my iPhone using Tapatalk Pro
Mine was a bit loose when I got it but I just tweaked the contact a bit and no issues.
Sent from my iPhone using Tapatalk Pro
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
But it makes it special...rare...elitist...more expensive...bigger PITA...
Looks like that bottle cap and the contacts are getting pretty cozy there, no?
It's a bit snug in there but a small piece of electrical tape solves that.
Sent from my iPhone using Tapatalk Pro
@JuicyLucy , any more news, opinions, likes or dislikes on the Chalice IV ? By the looks of it, it is a smaller Charm, too much air for me. @Rossum is playin' possum about it! All I really need to know is how it compares to the " N"
Wow - that's crazy!! Sorry to hear...
For a long time, I was "backwards" - I couldn't vape SS, it gave me a little cough.
But I think it was crap SS, cuz I tried again with a new source, and it's fine.
But in many of my favorite atties, I really prefer dual coils, and will still use kanthal or sometimes nichrome to hit the balance I want between resistance, mass, surface area, and ramp-up... Still, it's all simple single-wire stuff for my everyday vape..
For a long time, I was "backwards" - I couldn't vape SS, it gave me a little cough.
But I think it was crap SS, cuz I tried again with a new source, and it's fine.
But in many of my favorite atties, I really prefer dual coils, and will still use kanthal or sometimes nichrome to hit the balance I want between resistance, mass, surface area, and ramp-up... Still, it's all simple single-wire stuff for my everyday vape..
SS just tastes miles cleaner to me, I have a weird metal thing I suppose, that beautiful Damascus cap I have is pretty much useless to me; all I taste is carbon steel
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
@JuicyLucy , any more news, opinions, likes or dislikes on the Chalice IV ? By the looks of it, it is a smaller Charm, too much air for me. @Rossum is playin' possum about it! All I really need to know is how it compares to the " N"
Nope - been hoping Rossum would give his opinion, as he's the only one I know who has one yet, lol
The usual suspects (AKA, Todd) hasn't even reviewed it yet - and they kick him down all their gear
Guess I'll have to wait then... I was hoping for a Nuppin vs. Mulciber vs Chalice IV comparison from real people, not reviewers. So far, the Mulciber's vaping characteristics are comparable to the " N " according to a few people, notably @The.Drifter and that puts it high on my list.
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Still don't have a Mulciber - must be falling down on the job, lol
Wish it was a smidge smaller on the outside diameter, but I really should try one
I see the Saint fell in and out of love with it very quickly
The Charm is still my go-to when I feel like some serious DL - it lives permanently on one of my Tmods . It's too finicky for a main driver for my style of everyday vaping, though I usually do vape it everyday, just not all day
I stopped just short of getting the Mulciber since a very nice person around here made me a deal I couldn't refuseStill don't have a Mulciber - must be falling down on the job, lol
Wish it was a smidge smaller on the outside diameter, but I really should try one
I see the Saint fell in and out of love with it very quickly
The Charm is still my go-to when I feel like some serious DL - it lives permanently on one of my Tmods . It's too finicky for a main driver for my style of everyday vaping, though I usually do vape it everyday, just not all day
.
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
I stopped just short of getting the Mulciber since a very nice person around here made me a deal I couldn't refuse
Wudja get?
Khanninnarh
Member For 3 Years
Advanced Vape Supply Triple Core Fused Claptons. By spool.
I find that they are really good value and puts out really good flavor.... and clouds.
Sent from my iPhone using Tapatalk
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
I love AVS - their wire is pristine and the folks that run it are A1
I bought the Theriot BF with a Nuppin
I have their 28g SS316L triple and double core fused clapton wire as well, much better than the common Chinese offerings.
Still don't have a Mulciber - must be falling down on the job, lol
Wish it was a smidge smaller on the outside diameter, but I really should try one
I see the Saint fell in and out of love with it very quickly
The Charm is still my go-to when I feel like some serious DL - it lives permanently on one of my Tmods . It's too finicky for a main driver for my style of everyday vaping, though I usually do vape it everyday, just not all day
Never really fell out of love with it, I just don't have enough devices to keep all of my toppers happy.
I've been running a single orca for a couple of weeks now, even my Typhon is lonely!
It's a killer atty for sure, and once you get the coil placement you prefer, it's a flavor machine!
Wait a minute here, will you! You, of all people, don't have enough mods? WTF? Is this like the cobbler without shoes?
Like a mechanics car?
LOL yep. Literally only have one device.
I have a couple others stashed away, but my EDC is really all I have
Edit: because, despite what a lot of people think, modding does not make you wealthy LOL
do not know what an EDC is but if mech then you can always fix it.
Like a mechanic with his car and a trunk full of tools.
EDC = every day carry
Can't compare it to a Charm; those didn't appeal to me at all.@JuicyLucy , any more news, opinions, likes or dislikes on the Chalice IV ? By the looks of it, it is a smaller Charm, too much air for me. @Rossum is playin' possum about it! All I really need to know is how it compares to the " N"
Patience. I just got the thing a couple of days ago!
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Can't compare it to a Charm; those didn't appeal to me at all.
Patience. I just got the thing a couple of days ago!
Vape tease !
Much better than the other way around!
"Curse you Red Baron!"
I say this only because my wife much dislikes Ry4, it lingers & is too heavy to suit her. I love the taste of it and having no sense of smell I'm not bothered by the odor. Still, the old expression, "happy wife, happy life." Need to find a good Ry4 that doesn't linger so much.
...
Finding this more and more as I vape, get the variables all dialed in and you get the vape you desire, no matter the atty or mod really. Although, I also concur that vapers have a right to fashion & trends.