Become a Patron!

Squonkers are Bonkers

Le Furet

VU Donator
Silver Contributor
Member For 3 Years
Member For 2 Years
Do y'all think the VT Inbox is worth $66 even though it is a side panel squonk?

A lot of people really like it, that's a good price for sure. For me personally it seems a little on the big side.
 

jazzman

"I'm Old, Fat and Ugly with a crappy attitude!
VU Donator
Silver Contributor
Member For 4 Years
That SUCK'S! I did a $90 order this morning at FastTech. No Friggin' code this morning!
 

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
I'm looking at the VT Inbox and the YFTK SVA DNA75w Difference in price is $10 or so

I only have the VT so can't make a comparison

I got the VT for when I'm out of town (which is a fair bit these days) because it travels well

While I am a mech girl at heart, I like having a regulated squonker on hand when traveling because it's just easy, and this one goes well on airplanes.
The stopper that comes with the bottles makes it easy to take apart for getting on a plane, and I can slap it together before getting off the plane, to have an instant vape the first second possible once off, lol

I usually take it with me to work, because when I'm really busy, I don't have time to exercise the caution needed to use a mech
 

BrewBear

Platinum Contributor
Member For 4 Years
I only have the VT so can't make a comparison

I got the VT for when I'm out of town (which is a fair bit these days) because it travels well

While I am a mech girl at heart, I like having a regulated squonker on hand when traveling because it's just easy, and this one goes well on airplanes.
The stopper that comes with the bottles makes it easy to take apart for getting on a plane, and I can slap it together before getting off the plane, to have an instant vape the first second possible once off, lol

I usually take it with me to work, because when I'm really busy, I don't have time to exercise the caution needed to use a mech
Much appreciated opinion, thanks. From the few FT reviews, the SVA is a better fitted box, I haven't yet seen a comparison between the two. Actually I did see a vid around here, for the extra $9 or so, I'll probably go for it.
 

BrewBear

Platinum Contributor
Member For 4 Years
I ordered the SVA Styled:confused: for $75 bucks! Ordered the 5 pack of refill bottles and a 5 pack of 120 ml bottles. On to batteries now!:vino:
 

jazzman

"I'm Old, Fat and Ugly with a crappy attitude!
VU Donator
Silver Contributor
Member For 4 Years
Didn't know Chinese celebrate 4th of July?
 

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Didn't know Chinese celebrate 4th of July?

FastTech runs a sale for just about all American holidays

Think they might have missed Flag Day last month :mad:

But usually, their sales are only for 24 hours on the day of
 

jazzman

"I'm Old, Fat and Ugly with a crappy attitude!
VU Donator
Silver Contributor
Member For 4 Years
This was the first time I ordered from fastTech. Needed to order a parts kit for Hank's Coppervape that i bought. The black one was missing the o-ring on the screw and both washers.
 

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
This was the first time I ordered from fastTech. Needed to order a parts kit for Hank's Coppervape that i bought. The black one was missing the o-ring on the screw and both washers.

$90 worth :giggle:
 

jazzman

"I'm Old, Fat and Ugly with a crappy attitude!
VU Donator
Silver Contributor
Member For 4 Years
The black Coppervape was missing the items that i listed also the silver one was missing one of the washers, 2 bottles missing, the stumpy was missing the drip tip, needed to order some other o-rings and some 120ml bottles, 10ml needle bottles and some other things. I ordered 3 set's of V1 & V2 kits for the Coppervape.
 

Khanninnarh

Member For 3 Years
I only have the VT so can't make a comparison

I got the VT for when I'm out of town (which is a fair bit these days) because it travels well

While I am a mech girl at heart, I like having a regulated squonker on hand when traveling because it's just easy, and this one goes well on airplanes.
The stopper that comes with the bottles makes it easy to take apart for getting on a plane, and I can slap it together before getting off the plane, to have an instant vape the first second possible once off, lol

I usually take it with me to work, because when I'm really busy, I don't have time to exercise the caution needed to use a mech

Does the door on the bottle side come off easily when Squonking? As in the thumb getting stuck and pulling of the door? Was considering inbox or the yftk one.


Sent from my iPhone using Tapatalk
 
Last edited:

jazzman

"I'm Old, Fat and Ugly with a crappy attitude!
VU Donator
Silver Contributor
Member For 4 Years
Didn't know what version of the Coppervape Hank had, so I bought both.
 

BrewBear

Platinum Contributor
Member For 4 Years
Do the door on the bottle side come off easily when Squonking? As in stuck on the thumb? Was considering inbox or the yftk one.


Sent from my iPhone using Tapatalk
From what I read on the FT forum, the YFTK one's door is fitted much better than the VT Inbox door. I'll be able to tell you in a few weeks....I hope!
 

Khanninnarh

Member For 3 Years
From what I read on the FT forum, the YFTK one's door is fitted much better than the VT Inbox door. I'll be able to tell you in a few weeks....I hope!

Thanks!! I'm going to get the YFTK over the INbox today with the FREEDOM code


Sent from my iPhone using Tapatalk
 

Studiovape

Member For 3 Years
Member For 2 Years
Member For 1 Year
Much appreciated opinion, thanks. From the few FT reviews, the SVA is a better fitted box, I haven't yet seen a comparison between the two. Actually I did see a vid around here, for the extra $9 or so, I'll probably go for it.
i compared the two and went for the SVA clone, smaller and lighter, and more bottle options.
Mine is apparently on its way as of three days ago.
 

BrewBear

Platinum Contributor
Member For 4 Years
i compared the two and went for the SVA clone, smaller and lighter, and more bottle options.
Mine is apparently on its way as of three days ago.
Glad to see I'm not the only one! Please give a shout when you get it, let us know what you think. Oh, and welcome to the bonkers side!
 

Le Furet

VU Donator
Silver Contributor
Member For 3 Years
Member For 2 Years
Heya Google zen masters, does anyone know where stateside to get the Alliancetech bf pin / kit for the Dotmod 22mm?
 

Wicked Gene

Silver Contributor
Member For 4 Years
Happy 4th all you Bonkers!
Just got this nice ultem button in yesterday for my orca, thanks @minimalsaint!
d5302abf1bd6372d954408d553528d58.jpg

I also placed a order from FT this morning, picked up another copper vape (aluminum) and a kanger dripbox2 and some assorted bottles and such. Just about pulled the trigger on the VT inbox. Which one of you guys use the kanger db2? I've had the original and the db160, and was satisfied with their performance for what it is. Hopefully the db2 will fit in nicely.


Sent from my iPhone using Tapatalk Pro
 

TrollDragon

Silver Contributor
Member For 4 Years
ECF Refugee
Happy 4th all you Bonkers!
Just got this nice ultem button in yesterday for my orca, thanks @minimalsaint!
d5302abf1bd6372d954408d553528d58.jpg

I also placed a order from FT this morning, picked up another copper vape (aluminum) and a kanger dripbox2 and some assorted bottles and such. Just about pulled the trigger on the VT inbox. Which one of you guys use the kanger db2? I've had the original and the db160, and was satisfied with their performance for what it is. Hopefully the db2 will fit in nicely.


Sent from my iPhone using Tapatalk Pro
The Wraith and the DB2 I only run in power mode. There is a pseudo TCR on the DB2 but it only resolves to 4 digits... :facepalm: If you are looking to put a 0.00138 in for SS430 you can only enter 0.0013 which is too low, or put in 0.0014 which is too high. No TC is better than half-assed TC for me anyway. The battery meter on the DB2 is out of wack with the charge level as well. If it was just the meter being off that would be no big deal, but it starts to cut back power thinking the battery is low. One bar showing on the DB2 and 75% charge left on the battery.

The DB2 is what it is and stays on the bench in the shop as a quick flavor change vape when needed. The Drone and VT Inbox are daily carries.

Edit: That is one fine looking rig... :)
 
Last edited:

jcash74

Gold Contributor
Member For 5 Years
I finally built my hadaly and am using it on my wraith (new to sqounks). The flavor is great! I think I may (have to) buy more of these sqounkers lol.
Is it normal for the ohms to change from .42 to. 44? I'm using 24ga Kanthal 3mm coil with 5 wraps. I am assuming that the coil is cooling off because when I grab it after it sits it's at. 42 again. I want to make sure I'm doing this correctly before I try one of those beautiful little mechs I keep seeing in this thread.
 

Khanninnarh

Member For 3 Years
I finally built my hadaly and am using it on my wraith (new to sqounks). The flavor is great! I think I may (have to) buy more of these sqounkers lol.
Is it normal for the ohms to change from .42 to. 44? I'm using 24ga Kanthal 3mm coil with 5 wraps. I am assuming that the coil is cooling off because when I grab it after it sits it's at. 42 again. I want to make sure I'm doing this correctly before I try one of those beautiful little mechs I keep seeing in this thread.

Ohms should not jump when using Kanthal. It does when using Stainless Steel.

Maybe tighten the 510 and check if coils are screwed on tight on the Hadaly and see if it stabilizes.


Sent from my iPhone using Tapatalk
 

VU Sponsors

Top