Become a Patron!
Squonkers are Bonkers
- Thread starter DogMan
- Start date
I have a black Odis Atty clone on the way from FT. $7.47 and it should be here early next week
Sent from my iPhone using Tapatalk Pro
There's reports of the Coppervape versions's 510 being too short to make a connection with most mods.
Sent from my iPhone using Tapatalk Pro
So not entirely sure I'm liking the nuppin.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
V
The truth is that I couldn't "Like" your comment even though I love the Nuppins. If you decide it needs a new home, please let me know.
I really think it's just a matter of finding the right build for me, don't think I'd sell it/trade it just yet.
Sent from my iPhone using Tapatalk
If you look around pg 120, @The.Drifter did an awesome pictorial for single coil setup. A couple of pages later I posted the tricro coils I setup in my Nuppin, it is a great flavor built.
OOPS.
sorry I got the SXK one but it is now discontinued.
The "no name" ones seem to get good reviews. Not that it helps you now but hopefully I can comment on them next week.
Sent from my iPhone using Tapatalk Pro
I just avoid the hard to fill squonkers.
Just another route - I could never quite get the supersoaker flavor I like with a single in the Nuppin, though I tried a few times...and it's come close...
I usually build it with kanthal 27 gauge duals, 2.5mm, 5 1/2 wraps. Comes out around 0.43 every time...
Just enough wick to "fill" the coil but not tight, and just long enough to lie on the deck.
I usually build it with kanthal 27 gauge duals, 2.5mm, 5 1/2 wraps. Comes out around 0.43 every time...
Just enough wick to "fill" the coil but not tight, and just long enough to lie on the deck.
True, that's another way of doing it.
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Okay, last year, when the Odis clones first came out, Focalcig had the best one over the FT version
Now Focalcig isn't selling anything anymore (some kinda weird deal going down there...)
I want another like the Focalcig was selling as I screwed up and gave away the one I had
Now Focalcig isn't selling anything anymore (some kinda weird deal going down there...)
I want another like the Focalcig was selling as I screwed up and gave away the one I had
Is it possible it was a Shen Ray made one?
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Could be Brewski
It didn't say who the maker was - but it was far superior to the FT, I had both
Just reviewed a PM convo I had about it . Focalcig's was indeed way better
It didn't say who the maker was - but it was far superior to the FT, I had both
Just reviewed a PM convo I had about it . Focalcig's was indeed way better
You could ask Doris at 2fdeal, she was the CS rep at Focalcig in those days.
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Good idea!
* scribbles post it reading "TO BUY ..." sticks it up in sight *
As long as it's not some cursed 16 mm thing with a 14 mm inner diameter. Ugh, cannot build on that for crap. * looks up Gorge & sits going "ooooooh", "aaaaaaaah" noddy noddy noddy grin drool* Uh huh, uh huh, uh huh me buy, me buy. me even prolly buy authentic.
Right at top of my "reasonable" price but shoot if it does that well, no point buying clowns, erm clones.
Last edited:
Gorge is 24 mm that's easy peasey to build and has somewhat closed up chamber for decent flavor.* scribbles post it reading "TO BUY ..." sticks it up in sight *
As long as it's not some cursed 16 mm thing with a 14 mm inner diameter. Ugh, cannot build on that for crap. * looks up Gorge & sits going "ooooooh", "aaaaaaaah" noddy noddy noddy grin drool* Uh huh, uh huh, uh huh me buy, me buy. me even prolly buy authentic.
Right at top of my "reasonable" price but shoot if it does that well, no point buying clowns, erm clones.
Sent from my SAMSUNG-SM-N910A using Tapatalk
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
It has finally arrived!
Order yours today before they vanish.
https://www.fasttech.com/products/1/10037333/8107603-510-mounted-hand-spinner-fidget-toy-for-e
Order yours today before they vanish.
https://www.fasttech.com/products/1/10037333/8107603-510-mounted-hand-spinner-fidget-toy-for-e
Finally dialed in the Armor RDA...Used my SOI drip tip 
the one that came with it just wasn't ever going to work for me.. Have another drip too that would fit well also, just had to shave it a tad with the dremel.
The flat one is just a tad to short for me...
Learning curve for me...used to mech tubes building much lower...lets just say the first build in the armor was hot like fire
.35 dual Fused Claptons now and it's really nice.
Sent from my iPhone using Tapatalk
the one that came with it just wasn't ever going to work for me.. Have another drip too that would fit well also, just had to shave it a tad with the dremel.
The flat one is just a tad to short for me...
Learning curve for me...used to mech tubes building much lower...lets just say the first build in the armor was hot like fire
.35 dual Fused Claptons now and it's really nice.
Sent from my iPhone using Tapatalk
Finally dialed in the Armor RDA...Used my SOI drip tip
The flat one is just a tad to short for me...
Learning curve for me...used to mech tubes building much lower...lets just say the first build in the armor was hot like fire
.35 dual Fused Claptons now and it's really nice.
Sent from my iPhone using Tapatalk
Yes! That's around the same resistance I've been building for these small chambered flavored RDAs. I get that resistance with a single 316L coil though.
On another note, does anyone know where I can get a skin for my Coppervape BF? Checked jwraps and Vapor Skinz and both sites have nothing. My usually strong Google Fu has also turned up nothing.
Sent from my iPhone using Tapatalk Pro
jwraps should make you one if you send in your mod for size reference
but aren't they only <$30? is this for aesthetics more than protection?
jwraps should make you one if you send in your mod for size reference
but aren't they only <$30? is this for aesthetics more than protection?
Aesthetics. The black paint never started out looking decent to begin with but is looking worse these days. I've considered sanding it and repairing myself, but that seems like an awful lot of effort for a cheapo mod.
Sent from my iPhone using Tapatalk Pro
I saw that too but it didn't register, I didn't have enough caffeine floating the red blood cells.I took a peek.
That product page said...Estimated Shipping Time: Oct 22nd
A couple of logos I threw together for those of us that use DNA profile graphics.
So Galactika released a new 14mm squonker. Too small for me but kinda cool looking
Kanger must use good powdercoat on their 'comes with' squonk attys.
Wanted one to be SS finish.
Soaked all day in 100% Acetone.
Not a hit of color wiped off.
Wanted one to be SS finish.
Soaked all day in 100% Acetone.
Not a hit of color wiped off.
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Would love to have one, but that would be $250+ CAD landed...
I could get a L'Octopus from Enushi for the same money...
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Would love to have one, but that would be $250+ CAD landed...
I could get a L'Octopus from Enushi for the same money...
Just my humble opinion -
Finally got Le`Octopus - Le `Little Orca as interpreted by @minimalsaint is a much better squonk
What is the code?
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
FREEDOM
I've had a loaded cart for about a month, just waiting for a coupon sale, lol
I figured it might be.
FREEDOM
A long wait to buy a Wanko?