Hank F. Spankman
Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Become a Patron!
Squonkers are Bonkers
- Thread starter DogMan
- Start date
I finally parted with one of my squonks ... someone offered me a lavabox and an authentic hurricane jr. for my 3D printed Escobar. I really want that hurricane jr. Now I feel dirty. I have to find another squonk!! But I want a nice regulated DNA40 or something. With an O-atty. And a stabwood beauty ring. And a ......
Hank F. Spankman
Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
I have as follows: all SXK - Hadaly, Odis, along with Origen Little RDA anf Origen Little 16 BF. Thank you @Hank F. Spankman , I just needed someone else pointing me to more toys. Now that you Brought it to my attention, I just have to order both versions
Just wondering, can you BF the Petri RDA?
Just wondering, can you BF the Petri RDA?
Hank F. Spankman
Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
I have as follows: all SXK - Hadaly, Odis, along with Origen Little RDA anf Origen Little 16 BF. Thank you @Hank F. Spankman , I just needed someone else pointing me to more toys. Now that you Brought it to my attention, I just have to order both versions
Just wondering, can you BF the Petri RDA?
I wouldn't bother getting the non-BF Shift. There is a dude on the other place that could convert one for you. I wouldn't want to mess up that pretty deck lol
If I wasn't scared to death of mechs.....
KentA
VU Donator
Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
ECF Refugee
Thank you Hank, you ol' trouble maker!
You probably don't know this, but I love tinkering. For me the beauty of vaping is in all the "playing" I get to do trying to mod things to my way of vaping. Should squonking be something I really like, that just opens up a whole lot of more areas I get to play in.
Ooh fuck I want one of those....
Have you guys seen this? http://www.3fvape.com/rebuildable-a...banner&utm_campaign=161212_NoToy#.WGSAShsrJEZ
Hank F. Spankman
Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
One of my favorite atties is the Troll v2. Was dead simple to convert. Drilled through the center with a 5/64 bit, & used the pin from a Sapor conversion kit (the 510 screws are reverse threaded)
KentA
VU Donator
Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
ECF Refugee
Yea, I've got one coming from fasttech.
Interesting, isn't it?
FT also has it search on SXK.
I e-mailed ShenRay last night asking for prices on some of their rdas, I have been reading they are one of the better clone manufacturers. I got a reply from them this morning, telling me they sell wholesale from their site and directing me to this site for retail purchases 2fdeal.com
Does anyone here have any experience with this manufacturer? and have you ever heard of the 2f site?
Does anyone here have any experience with this manufacturer? and have you ever heard of the 2f site?
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
"Sophistication" doesn't mean shit if you are getting a kick-ass world class vape out of it -
I wanna see that statement posted somewhere else, I dunno - like a car site, or maybe clothing - see if people can figure out what it means.
Actually, there was a real popular customer service person at some other big site - FastTech or 3F or Gearbest or something, who LEFT the company to go work "direct for the manufacturer ShenRay" and said goodbye to a few regular customers, letting them know where she'd be.
And it was 2F.
So I've heard of it, and I think it's legit, but haven't bought there.
And it was 2F.
So I've heard of it, and I think it's legit, but haven't bought there.
I think it was Focale.
LMAO No one will even clone the chaos RDA.
2fdeal has spinners they must be legit.
2fdeal has spinners they must be legit.
Her name is Doris, she left Focal for Shenray. My two experiences with Focal since she left have been nothing but total headaches. I use to order from Focal to get Shenray who makes awesome clones as well as their own stuff but with the quality of SXK and others being so good now I'm just using FT. Haven't tried 2Fdeal but I saw where she listed them as a source so they should be legit.
Last edited:
Well finally felt good enough to fire up my Shift BF clone.
Out a .5 ish 2.5 mm 26 gs SS coil in there. vaping on a Dripbox 160 at 390 F. A very nice MTL vape. If you like MTL I highly recommend it.
However MTL is pretty much all it is good for.
But as to the flavor yes very good but no better than several others.
I have decided that the flavor chasing game is an evil plot spawned by the atty manufacturers to sell more attys.
Out a .5 ish 2.5 mm 26 gs SS coil in there. vaping on a Dripbox 160 at 390 F. A very nice MTL vape. If you like MTL I highly recommend it.
However MTL is pretty much all it is good for.
But as to the flavor yes very good but no better than several others.
I have decided that the flavor chasing game is an evil plot spawned by the atty manufacturers to sell more attys.
I put a slightly larger bore driptip on the Shift and like it better.
Velocity is full lung machine.
I put 2 .6 26 ga ss316l coils in mine and squonk on tc.
Or with those coils they work nice on the coppervapes too.
You might like the O atty if you don't have one.
Thanks @The Cromwell, I have a Hadaly and O atty on their way from FT. I will order a couple of Shifts but for now....back to the Dotbox and Petri.
Last edited:
I love the Oatty. the halady not as much it is pretty much a tight draw MTL only atty.
The Oatty is easier to put dual coils in as well.
I have another Goon and a Hobo Drifter on the way from FT.
And I think another Oatty as well. I forget.
Just put the Shift BF on a Coppervape and it does ok with the .6 SS coil. Need to drop a turn or two though I think.
2.5 mm 26 ga SS316l 10/9 turns. I think 8/9 will be about perfect for the coppervape.
2.5 mm 26 ga SS316l 10/9 turns. I think 8/9 will be about perfect for the coppervape.
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
I was done buying stuff until SOMEONE got me into this squonking madness....Yeah, there just might be something to this squonking business
heck I am trying to figure out how to squonkify a Subtank mini.
Dripping though is still a no go except for DIY juice testing. I still have 2 attys that are not squonkified.
have you checked out the SXK BF 99 atty. it is 18mm....
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Saw it and several other of the No Toy clones are out there.
The sheer number of BF available all of a sudden is astounding - even six months ago it was difficult to find much in the BF category, and were ungodly priced when you could find them, little lone inexpensive clones.
I'll probably just keep stocking up until it becomes too hard to get around the regs
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
My gold and SS LP Goons arrived today......
Will reorient the sex tomorrow, I mean....install the BF pins......
Can't wait to hear your take on the LP vs V1 authentic
Interesting I wonder how they did it with the pin.....very cool though.
You talked me into it doggie
Saw it and several other of the No Toy clones are out there.
The sheer number of BF available all of a sudden is astounding - even six months ago it was difficult to find much in the BF category, and were ungodly priced when you could find them, little lone inexpensive clones.
I'll probably just keep stocking up until it becomes too hard to get around the regs
shoulda tried it a few yrs ago...lol.was tuff for sure.
looking at this thing I don't think it was meant for anything but a single coil..otherwise it will be a very hot vape..can you post a pic of the build?
The squonk side is very seductive.This is getting better, I think I might like squonking
Let the vapor of the Squonk Side flow thru you.
Hank F. Spankman
Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
getting the cap on involves much swearing
but i will say that my build is very hot, even on a single cell mod... next time i might add a wrap
Hank F. Spankman
Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
New member of the family
Fuck you inspects! Just fucking fuck you! lol
My builds won't win any beauty pageant in a hurry
Sent from my LG-H815 using Tapatalk
Hank F. Spankman
Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
My builds won't win any beauty pageant in a hurry
Sent from my LG-H815 using Tapatalk
Shit, I like it. Trying hard not to grab 1 or 2 more