Hank F. Spankman
Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
It takes the pin from the Sapor BF kit. A fatdaddy won't work, it's reverse threaded. And yes, it's worth the $5 for the kit
Become a Patron!
Squonkers are Bonkers
- Thread starter DogMan
- Start date
It takes the pin from the Sapor BF kit. A fatdaddy won't work, it's reverse threaded. And yes, it's worth the $5 for the kit
Okay, thanks again.
2.5 mm FDV pin works fine with the goon clones I got.
Just have to grind a bit of the head off for best fit. Otherwise the atty will not sit flush.
Good atty but not a MTL atty if that is what you are looking for.
I bought a clone and liked it so well I got another one.
I got this one from FT.
https://www.fasttech.com/p/5757503
it is the 22 mm version they also have LP and 24's.
Hank F. Spankman
Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Also..... I use the 510 tip that came with my Troll on my Nuppin. It's like it was made for it
Thanks Bob...!
i have a couple more authentics...with copper top and a delrin top...sstop...lol...lotsa tops left over and the inner ring of course.have a brass one i got from chowder too.LMK...the brass one is a lil more cuz i have more in it.but shines up nice still.
add:i also got my lp goon from FT and hadda do a lil drilling but wow what a flavor machine.
No shit on that. I would like to know what kind of metal is used on some of these attys. Extremely hard, some of them, and I have busted many times the value of a couple of them on good bits. Last fiasco was the Rafale X, either too loose a draw with 3 air holes, or too tight with 1. So obviously just punching a second air hole next to the 1 hole will be just right. As it turns out, it is just right, but getting there was costly. Finally handed it off to an expert, and after he busted a couple bits, he bored it out like a rabid beaver with an air drive stone...
SS can be a tough drill.
got mine on Chester right now.
Can't believe I have not flooded that tiny thing all over Chester.
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Wasn't all that excited about `em - they look kinda fidgety - but - that black with a clear cap does look pretty hot and I do enjoy a good MTL squonk....
They are ok.
Would rather have another Oatty though.
Would rather have another Oatty though.
Hank F. Spankman
Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Just 1? Smfh
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Can always buy more cheap clones later - for now anyway
Squonkified Tsunami 22 is vaping nicely in SS TC on a Dripbox 160. Dual 4mm 24 ga SS316 coils.
About .28 I think?
About .28 I think?
Took care of a slight issue with the Narda. It had a really annoying whistle to it when drawn through. A little buffing out with some 3M Scotch pad helped get rid of machining burs left behind. There's still a hint of a whistle at times but I figure a little more use and breaking in will dull that out. Found out the Otis top cap will interchange for the Narda top cap. The Otis cap is taller by a wee bit, ergo larger air chamber. I'm enjoying exploring the Narda, and Otis despite having broken the Otis deck. *chuckles* Also got a Hastur V2 now, with a working deck. It's fair but I'm still not quite sure what the swirly air flow design was about. 
@Danimal77 , You might look at Fast Tech for a Velocity V2. They have them at a fairly good price for clones.
@Danimal77 , You might look at Fast Tech for a Velocity V2. They have them at a fairly good price for clones.
Would rather have another .... *ahem* oh we're talking about rdas, erm, think I'm probably going to get another Narda or three, might get another Otis or two. I like Goons and they do real well for what they are, to a degree I can say they are somewhat the bomb diggity for me. Got two Goons now, not going to need more. Also got the Velocity V2s, an old "terminator" style rda which was with the cheap'o plastic squonker, an rda what come w/ the CopperVape mod kit.
Whew, seems like I wound up with a gaggle of some of the better rdas, or at least acceptable clones of them. I might get authentic Nardas if they're found 'cheap' *rolls eyes* Might even get authentic Goons later on, i saw those reasonably priced too. I'll forgo getting Velocity authentic, just on principle, they're way too over priced for a stamp of authentic, can get less than $10 clones that'll do close enough to suit me.
No, don't you worry none over what I was thinking of having, Bob. It wasn't quite safe for working environments, maybe not retirees either or strange homesteaders that dance in the moonlight skyclad.
Ha! Clowns are a dime a dozen, or is it Cloonies? I can never 'member. All I know is, "Who cares what psychologists write on walls?" I'm liable to be set unto lithum salts soon. Hopefully, it'll not be a chemical lobotomy, rather have the bottle in front of me.
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
OHH no worse than getting a Wanko!I wasn't going to admit it, but I got one with the FT coupon yesterday
Put a Wanko on top and have a Frankenwanko.
I knew you couldn't resist a cheap squonkerI wasn't going to admit it, but I got one with the FT coupon yesterday
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Cromwell, nothing could be worse than getting a wanko ... But maybe Hank will come up with something
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
I knew you couldn't resist a cheap squonker
I'll top it with that Mark Bugs atty I just popped $159 for
Frankenskull was $12.43 after the coupon
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Better than sticking a Wanko on her, lol
Wankos are pretty good with dual 2.5 coils in them.
Not the snap in things.
Like a NarDa on steroids.
Much better to me than the Hadaly.
The little bitty Shift BF has grown on me a bit.
Took it and Chester out on the town today full of Cinnamon Danish Custard.
Not the snap in things.
Like a NarDa on steroids.
Much better to me than the Hadaly.
The little bitty Shift BF has grown on me a bit.
Took it and Chester out on the town today full of Cinnamon Danish Custard.
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
I'm one of the world's few NarDa haters, lol
Love the flavor, but too, I don't know. Too much DL?
And not into airy vapes, which is why I do not like the Tsunami
I'm in love with the Hadaly though. Got one authentic and three clones. The clones aren't quite up to scratch. They are good. The authentic is GREAT, for my style anyway
What you're saying JL, the Hadaly is worth the $70? I have one coming from FT...sometime this millenium
, but if I like the draw on it (tight MTL), I wouldn't mind getting the authentic.
What about the Oatty?
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Still haven't built any of the two I got in the mail unexpectedly
For me it was. There are several subtle differences in the clone and the authentic. Looked close enough I thought they'd vape pretty much the same, but the flavor is just not as good in the clone for my builds and style of vaping.
Others may have a different experience.
I'm glad I splurged and got the authentic first, because based on the clone, I'd of used it and like it, but probably would not have gone for a real one and would be seriously missing out
You guys are gonna make me get a second job!!!!! I already have a Kanger 160, a Dripbox v2 (and like both but the Db v2 better) a Pico squeeze on the way.....and now I.m looking for a authentic Hadaly
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
You guys are gonna make me get a second job!!!!! I already have a Kanger 160, a Dripbox v2 (and like both but the Db v2 better) a Pico squeeze on the way.....and now I.m looking for a authentic Hadaly
Wait and see if you like the clone first on the Hadaly because you haven't even scratched the surface yet
I figured I should, but to me, instant gratification takes too long!!!! I may just order one on ebay, the one from FT takes too damn long to get here.
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Mine from FT came fairly quickly - for FastTech anyway, lol
♪ ♪ ♪ ♩ ♩ ♩ ♫ ♫ ♫ " She came in from the night like a NarDa on steroids ... " ♪ ♪ ♪ ♩ ♩ ♩ ♫ ♫ ♫
♪ ♪ ♪ ♩ ♩ ♩ ♫ ♫ ♫ " We stormed the ramparts and fought deadly on high like a NarDa on steroids ... " ♪ ♪ ♪ ♩ ♩ ♩ ♫ ♫ ♫
♪ ♪ ♪ ♩ ♩ ♩ ♫ ♫ ♫ "Fidle dee heigh didle oh, over the moon the cow like a NarDa on steroids ... " ♪ ♪ ♪ ♩ ♩ ♩ ♫ ♫ ♫
Bob is writing jingles in a mad effort to subliminally persuade me to buy a Wanko.
I did not realize Bob is secretly a
. "More squonk I must, force refuse of the Sith will I." * squonk, squonk * 
My Pico Squeeze landed from FT after 7 friggin' weeks on god knows how many boats, planes and trucks and I gotta say that it is a great little mod for under $20.
The little white light is annoying as shit but it works well with my Origen 16. Very small mod and pretty damned light. Great intro box for anyone looking to try squonking on the cheap.
I'm going to put my REO Grand away for a while and use the Pico and a Coppervape. Interested to see how long the Pico will survive under heavy use!
I ordered a 10 pack of replacement bottles and a spare bottom plate for just over $5 total from FT, so I should be set for a while.
The little white light is annoying as shit but it works well with my Origen 16. Very small mod and pretty damned light. Great intro box for anyone looking to try squonking on the cheap.
I'm going to put my REO Grand away for a while and use the Pico and a Coppervape. Interested to see how long the Pico will survive under heavy use!
I ordered a 10 pack of replacement bottles and a spare bottom plate for just over $5 total from FT, so I should be set for a while.
Thanks but I bought 10
Also there are 2 different kits the one with a smaller diameter shank switch button and one with a larger shank one.
The V1 kit has the smaller shank one.
both my CV's are shiny alum and are V1.
@BreSha6869, let us know what kind of battery life you get one it. I really like the Dripbox 2, in spite of the sloppy fitting and rattling bottle cover but what really sucks is the battery life. I have a 0.45 ohm build in a squonkified Derringer and all I get is a couple hours from fresh charge to 50-60 % charge.
I get about 1.5 bottles of juice per battery. Running .35 SS in TC mode.
Thanks but I bought 10
Also there are 2 different kits the one with a smaller diameter shank switch button and one with a larger shank one.
The V1 kit has the smaller shank one.
both my CV's are shiny alum and are V1.
kool...was just offerin to help out if someone needed a kit.i ended up using a small flat rubber oring to stop the seepage at the squonkpin...workin great so far.
Seepage at squonkpin?
yeah on my CV mechs after a few 10ml runs they were getting wet=seeping with ejuice.not alot but enuff to mess with my add...lol.for a while i just put some cotton around where the 510 pin area is.
From what I've read and seen in reviews, it's not really the battery life. It's the reading of the charge the DB2 gives. If you pull out the battery and put it in a different mod it will give you a much higher reading than the DB2. It could be a firmware issue, but if that is the case Kanger should've addressed the issue by now. The DB160 doesn't have this problem.
Sent from my iPhone using Tapatalk