Become a Patron!

Squonkers are Bonkers

BrewBear

Platinum Contributor
Member For 4 Years
Okay, so I could never get into squonking. I tried. It just wasn't my thing. Even sold almost all my squonk gear - and what I haven't sold is for sale. That being said...

This. The Furyan by Lost Vape. This is a DAMN GOOD REASON to give squonking another try. This new mech from Lost Vape is a thing of absolute beauty!!!

oM6pVtt.jpg
Go for it @CrazyChef v2.0
 

~Don~

Platinum Contributor
Member For 5 Years
Ain't gonna ask, but I have some Ghost chilies growing in a pot on the back patio!

Yeah those are a tad to hot for me lol...

Wife has been sick the past few days...and colds and the flu take up to 72hrs to take full effect...and well hot chili to where it makes me sweat like mad and a gallon of water to hydrate...I can normally knock the cold out in a few hours.
 

RSZ1

Bronze Contributor
Member For 2 Years
Member For 1 Year
How about this one as well ,jorda B clone
Going to try one of these nearly bought authentic but opted for pelso v3 authentic, since i already had le Concorde which is similar, im hoping the clapton clamps from pelso might fit

Sent from my ONEPLUS A3003 using Tapatalk

Comes with 3 top caps all for under $12. Crazy. Another reason to make an order from 2fdeal. Krma and now the Jorda b.
 

jasonandsarah

Gold Contributor
Member For 3 Years
Okay, so I could never get into squonking. I tried. It just wasn't my thing. Even sold almost all my squonk gear - and what I haven't sold is for sale. That being said...

This. The Furyan by Lost Vape. This is a DAMN GOOD REASON to give squonking another try. This new mech from Lost Vape is a thing of absolute beauty!!!


oM6pVtt.jpg
Will u have them chef?

Sent from my SM-G955U using Tapatalk
 

Michael H.

Silver Contributor
Member For 4 Years
Need some Orca help.

I know the one I purchased has the silver cbattery strips...the 510 however is not silver coated.

So I want to do this...do I need the larger contact nut or will the one in the kit work just fine.

And what's the better MM bottles to have?...the $9 silicone or the $5 bottles?

In all honesty I'm not crazy about the soft silicone bottles...my nudge has one and it just makes a mess....better alternative?
Screenshot_20180503-193820.jpeg
 

b.m.

Silver Contributor
Member For 4 Years
Need some Orca help.

I know the one I purchased has the silver coated copper battery strips...the 510 however is not silver coated.

So I want to do this...do I need the larger contact or will the one in the kit work just fine.

And what's the better MM bottles to have?...the $9 silicone or the $5 bottles?

In all honesty I'm not crazy about the soft silicone bottles...my nudge has one and it just makes a mess filling the bottle...better alternative?
View attachment 110174
The smaller nut that comes stock on the 510 works fine in the Orca,so the one that comes in the kit will work.If you don't like the silicone,the regular $5 Modmaker bottles are very nice,i prefer those over the silicone bottles.
 

Michael H.

Silver Contributor
Member For 4 Years
The smaller nut that comes stock on the 510 works fine in the Orca,so the one that comes in the kit will work.If you don't like the silicone,the regular $5 Modmaker bottles are very nice,i prefer those over the silicone bottles.

That's awesome....thank you.
 

snake94115

Diamond Contributor
Member For 4 Years
Love them guys too... Prefer a little more depth sometimes :)

You ever read any David Weber?

Sent from my LG-H931 using Tapatalk
I've only read his (163x) stuff.If I recall a friend of mine recommended him a few years ago.I was reading a fuck ton of alternative history stuff at the time.I had just finished Harry Turtledove's (Worldwar tetralogy)
I'm all over the place when it comes to reading.
 

PoppaVic

Gold Contributor
Member For 4 Years
Whee.. I can get the Tobeco Velocity V2 into my rotation - the FDV squonk pin fits just fine.. I may not even cut it off.
 

~Don~

Platinum Contributor
Member For 5 Years
Need some Orca help.

I know the one I purchased has the silver cbattery strips...the 510 however is not silver coated.

So I want to do this...do I need the larger contact nut or will the one in the kit work just fine.

And what's the better MM bottles to have?...the $9 silicone or the $5 bottles?

In all honesty I'm not crazy about the soft silicone bottles...my nudge has one and it just makes a mess....better alternative?
View attachment 110174

The Orca you have has Argentium Sterling Silver .935 Silver...

The items you added besides the actual 510 is what you need, well the smaller nut will work, although the larger nut will lessen the travel the vertical contact needs if left straight...if you bend it at a 90* then the small one will suffice.

As for a larger button in black...you can enlarge the hole from the 8mm size to one larger if you want and purchase any 12-14mm button or order one from Floris direct, including door in black. I wouldn't dye it unless you are ok with knowing that doing so in to hot of water can warp the door.

For bottles, all depends on how firm of silicone you want... the supplied bottle with your Orca is a REALLY soft one.
 

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Whee.. I can get the Tobeco Velocity V2 into my rotation - the FDV squonk pin fits just fine.. I may not even cut it off.

did your Tobeco Velocity 2 not come with a squonk pin?

They like to trick you and add a very, very thin screw up the squonk hole you have to remove from what looks like a regular pin
 

Michael H.

Silver Contributor
Member For 4 Years
The Orca you have has Argentium Sterling Silver .935 Silver...

The items you added besides the actual 510 is what you need, well the smaller nut will work, although the larger nut will lessen the travel the vertical contact needs if left straight...if you bend it at a 90* then the small one will suffice.

As for a larger button in black...you can enlarge the hole from the 8mm size to one larger if you want and purchase any 12-14mm button or order one from Floris direct, including door in black. I wouldn't dye it unless you are ok with knowing that doing so in to hot of water can warp the door.

For bottles, all depends on how firm of silicone you want... the supplied bottle with your Orca is a REALLY soft one.

Well I may not be ordering any of that due to the sites "age verifier" not allowing me to upload my i.d....smh, I'll have to call them and see if I can email it to them.

I might try the bigger contact too...I'm maybe going to double and triple the order to see if I can upgrade a cheap squonk box as well.

I'm fine with the smaller button I just want a black one and maybe some other colors to change things up a little.
 

snake94115

Diamond Contributor
Member For 4 Years
I recently came to have in my possession an Eleaf Pico Squeeze mod & one Dead Rabbit SQ RDA. Thanks to Cosmic Santa for that too. I'm sure eventually, I'll get called to muster with his helpers and end up passing gear along. :)

---8< --- Pico Squeeze & Dead Rabbit RDA Review ---

Did not prepare for the Pico Squeeze.

Wow! This is a wonderful tiny excellent purpose squonking mod. I normally would bulk at even a MOSFET as knocking a mod from being a favorite one, choosing instead all fully mechanical mods. The Pico though impresses me for how light it feels but it still acts like a powerhouse twice the size and weight.

I like how the battery is placed in the Pico Squeeze, except for trying to push the battery cap as the fire button. It for me is ergonomically in line of muscle memory having used the CopperVape which has a top based fire button. No fault of the Pico at all but something to note if you use another mod with a top placed fire button.

Had a little difficulty in figuring out how to get the bottle out. This takes just a little bit to learn, grasp the bottom edge of the bottle and gently tug it down and out. I like how the bottles are designed with two raised, outset marking rings. The bottles don't seem hard to me but nor do they seem soft. They're what I think is appropriate, you need to give the bottle a firm squeeze to get juice into your RDA.

Using it also helped me deduce a dead short in a Wasp Nano RDA. Come to find out some bit of metal from one of the previous positive pins had flaked off the pin into well of the RDA. This material being debris then did as debris is wont to do, it got into a place it was not meant to be and caused an issue. Well, I was able to see that by using three different mods with the RDA, the Pico having been the one used as last ditch. Yes, I erroneously kept thinking the mods I used were wonky. Did not occur to me to re-clean yet another time and find the material.

The Dead Rabbit? Well I didn't think being larger chambered would let it produce much flavor. I was wrong. The way the grooves for the air flow control are done is great! It helps the RDA by bringing air in and all the way around the coil. It is that air which then amplifies the flavor. By the Dead Rabbit SQ RDA, I'm impressed as well.

All in, I would suggest both products. Personal preference steers me toward the Pico and a Wasp Nano for now. This of course does not exclud3e me enjoying a CopperVape mod, still. :)

----- Pico Squeeze & Dead Rabbit RDA Review - >8---
Glad you're liking you new setup.Maybe 1 day I'll get myself a Pico Squeeze.
 

snake94115

Diamond Contributor
Member For 4 Years
Feedlink Revvo kit arrived just now.

Out of the box impressions are 98% favorable.

Solid feeling.

Surprisingly good vape off this tank.

Squonks very easily.

Fills very easily... Possibly the best bottle system I've had the pleasure of using.

Translucent button with battery indicator LEDs under... Easy to see.

Why only 98%?

Screw-in battery cap.

Colors don't quite match (how's that for picking the proverbial nits?).
6b91fc3bd2aba6ae095df398d32bd740.jpg


Sent from my LG-H931 using Tapatalk
Let me guess it is only sold as a kit.Which means I'll be stuck with a tank I'll never use and wouldn't in be able to PIF it in good conscience.
Maybe I'd be able to pull the squonk pin out and install it in a (Amplevape Mace Tank)

 

PoppaVic

Gold Contributor
Member For 4 Years
I've been using 3f more than Ft this year.. Pay for the next level up on shipping, and it seems to always take 14 days to the west coast. Less than a buck, iirc. The thing is: their tracking sucks and apparently you have to email support and scream a little to ever get a USPS tracking number - from the day they do that it typically hits me in 4 days.
 

The Cromwell

I am a BOT
VU Donator
Diamond Contributor
Member For 4 Years
The one I commented on is one less F:vino: I usually get my orders from 3F in about 8 days unless they F-up and don't have the stuff in stock!
2F is slower than molasses in winter time!
Don't think I have ever ordered from them.
 

shawn.hoefer

Gold Contributor
Member For 4 Years
I've only read his (163x) stuff.If I recall a friend of mine recommended him a few years ago.I was reading a fuck ton of alternative history stuff at the time.I had just finished Harry Turtledove's (Worldwar tetralogy)
I'm all over the place when it comes to reading.
I devoured the Honor Harrington series... Loved the way it melded science fiction and naval warfare.

Sent from my LG-H931 using Tapatalk
 

~Don~

Platinum Contributor
Member For 5 Years
I'm an ass with FT...if anything isn't as described or working, I pretty much put the Paypal payment in dispute.

I seem to get a response quick and often lol

I mean it's trivial most of the time.

For instance a $8 RSA...take 2 months to remedy and 32 back and forth messages on the ticket lol


Sent from my iPhone using Tapatalk
 

Train

Gold Contributor
Member For 5 Years
Can't decide what to put this on...I have like 20+ mods all vaping nicely, lol.
Still...I'll get an itch and build it - by tomorrow night, I'm sure.
Nifty colors (it's heat treated Ti plated, authentic)
haku-ti1.jpg

Actually, while it looks blue in the photo, it's got some greenish, and looks pretty badass up next to my army green Mech13.
 

Papachaz

Silver Contributor
Member For 2 Years
I'm an ass with FT...if anything isn't as described or working, I pretty much put the Paypal payment in dispute.

I seem to get a response quick and often lol

I mean it's trivial most of the time.

For instance a $8 RSA...take 2 months to remedy and 32 back and forth messages on the ticket lol


Sent from my iPhone using Tapatalk

Yeah I’m thinking a Paypal dispute is what it’s going to take. I’m ok with waiting a couple of weeks for them to send a replacement but two days and no reply is just pissing me off.


Carpe Nidor
 

VU Sponsors

Top