Become a Patron!

Squonkers are Bonkers

BrewBear

Platinum Contributor
Member For 4 Years
Don't know. Juicy says the clones are not on par with authentic. She's a clever girl, not elitist but knows when auth is better. So I bought authentic only.

Sent from my SM-T819Y using Tapatalk
I took @JuicyLucy's word on the Hadaly. I had the SXK clone, it was OK but not quite what I liked. I bought the authentic and love it. There is something I can not define but the vapor and flavor are better.
 

USMCotaku

Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Ok, so say I do go authentic and eat ramen for a few weeks...where is the cheapest place to purchase (I am in california, so free shipping, or usa based preferred)?
 

USMCotaku

Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
If you're asking about VaporDNA, they're in Torrance, California. Fifty odd miles from my house. It's a pisser to make a 100 miles round trip there only to find out they're sold out on the stuff you want!
they show sold out on the Hadaly
 

DogMan

VU Donator
Diamond Contributor
Member For 5 Years
If you're asking about VaporDNA, they're in Torrance, California. Fifty odd miles from my house. It's a pisser to make a 100 miles round trip there only to find out they're sold out on the stuff you want!

yeah, vapor dna

just seems a lot of tax, so assumed california
 

DogMan

VU Donator
Diamond Contributor
Member For 5 Years
just reread the first few pages here, after the recent question if there is anything new

then searched the thread for coppervape, i thought it was longer ago than may that they came out
 

Hank F. Spankman

Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
fbabcdd9d68d59e1e60fc82e06b66050.jpg
 

USMCotaku

Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
lol, vaporoyalty shows it as "instock" but no order button, only add to wishlist. when you refresh the page, it shows out of stock, but then goes right back to showing in stock :headbang:
 

USMCotaku

Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
So, how bad do you want that Hadaly? Remember, they open at 11:00 am.
maybe they will come back in stock before a certain top cap arrives. When I am booked on a show, I am usually pretty close to them, within 25 miles or so.
 

caihlen

VU Donator
Bronze Contributor
Member For 3 Years
Member For 2 Years
Member For 1 Year
My friends,

A conceptual difficulty on my part. Here we go. I spin up a 24 g ss 316 coil at 8 wraps, 4 mm and get .5 ohms. I throw it on my new mech and my calcs come out at 7.4 amps. Should be well within limits and good to go. Right? That's at a nominal 3.7 volts. Where I get all jiggy is when I spin up dual coils, 16 wraps, all else being equal. Same resistance, but it will take more power and be not safe because...? What exactly happens to the battery here? I'm struggling to understand.
 
Last edited:

DogMan

VU Donator
Diamond Contributor
Member For 5 Years
My friends,

A conceptual difficulty on my part. Here we go. I spin up a 24 g ss 316 coil at 4 wraps, 4 mm and get .5 ohms. I throw it on my new mech and my calcs come out at 7.4 amps. Should be well within limits and good to go. Right? That's at a nominal 3.7 volts. Where I get all jiggy is when I spin up dual coils, 8 wraps, all else being equal. Same resistance, but it will take more power and be not safe because...? What exactly happens to the battery here? I'm struggling to understand.
Use 4.2volt for calcs on a mech.

Same resistance is same amp draw on single or dual

Sent from my SM-T819Y using Tapatalk
 

SirRichardRear

AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
My friends,

A conceptual difficulty on my part. Here we go. I spin up a 24 g ss 316 coil at 4 wraps, 4 mm and get .5 ohms. I throw it on my new mech and my calcs come out at 7.4 amps. Should be well within limits and good to go. Right? That's at a nominal 3.7 volts. Where I get all jiggy is when I spin up dual coils, 8 wraps, all else being equal. Same resistance, but it will take more power and be not safe because...? What exactly happens to the battery here? I'm struggling to understand.
It'll be just as safe but will be harder for 1 battery to heat up because the mass. For a mech safety is decided by resistance with volts being calculated at 4.2 (for a safe limit) but actually making a build worth while includes making sure there isn't more metal then you have power for.

Sent from my SM-G935V using Tapatalk
 

Zaxxaz

Silver Contributor
Member For 4 Years
My friends,

A conceptual difficulty on my part. Here we go. I spin up a 24 g ss 316 coil at 4 wraps, 4 mm and get .5 ohms. I throw it on my new mech and my calcs come out at 7.4 amps. Should be well within limits and good to go. Right? That's at a nominal 3.7 volts. Where I get all jiggy is when I spin up dual coils, 8 wraps, all else being equal. Same resistance, but it will take more power and be not safe because...? What exactly happens to the battery here? I'm struggling to understand.
That should be .25 on a single coil and .23 on dual coils by my calculations
 

inspects

Squonkamaniac
Senior Moderator
VU Donator
Diamond Contributor
Member For 5 Years
How is the airflow, is it similar to the Goon?...or what?
 

caihlen

VU Donator
Bronze Contributor
Member For 3 Years
Member For 2 Years
Member For 1 Year
It'll be just as safe but will be harder for 1 battery to heat up because the mass. For a mech safety is decided by resistance with volts being calculated at 4.2 (for a safe limit) but actually making a build worth while includes making sure there isn't more metal then you have power for.

Sent from my SM-G935V using Tapatalk
Bing. The light goes on. Thanks man.
 

Train

Gold Contributor
Member For 5 Years
Something's off.
24 g 316, 4mm, 4-wrap is not 0.5, it's more like 0.25
So is the 8 wrap dual.
So you're at like 16 amps...



My friends,

A conceptual difficulty on my part. Here we go. I spin up a 24 g ss 316 coil at 4 wraps, 4 mm and get .5 ohms. I throw it on my new mech and my calcs come out at 7.4 amps. Should be well within limits and good to go. Right? That's at a nominal 3.7 volts. Where I get all jiggy is when I spin up dual coils, 8 wraps, all else being equal. Same resistance, but it will take more power and be not safe because...? What exactly happens to the battery here? I'm struggling to understand.
 

SirRichardRear

AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
Something's off.
24 g 316, 4mm, 4-wrap is not 0.5, it's more like 0.25
So is the 8 wrap dual.
So you're at like 16 amps...
I think he was just using a generic example about coil size and safety

Sent from my SM-G935V using Tapatalk
 

minimalsaint

Silver Contributor
Member For 3 Years
Member For 2 Years
Member For 1 Year
So much talk about the Hadaly, had to buy one.

https://www.bevapehappy.com/products/hadaly-rda-by-psyclone-mods

Never heard of this outfit, hope for the best......:oops:

I think you'll love it, the ease of building on the deck was 2/3 of the best part for me, everything else was just cream cheese!
Great flavor, fairly tight / loose airflow if you want it, hard to flood, harder to put down :D

If you don't love it, you and I will work out a deal. even if that deal is me buying it from you!
 

inspects

Squonkamaniac
Senior Moderator
VU Donator
Diamond Contributor
Member For 5 Years
I think you'll love it, the ease of building on the deck was 2/3 of the best part for me, everything else was just cream cheese!
Great flavor, fairly tight / loose airflow if you want it, hard to flood, harder to put down :D
Oops...sorry ole buddy...posted at the same time.

Thanks for the info.
 

inspects

Squonkamaniac
Senior Moderator
VU Donator
Diamond Contributor
Member For 5 Years
O16 kinda. Sorta. But different flavour profile. Neither is better or worse flavour. They just highlight different notes.

Sent from my LG-H815 using Tapatalk
Thanks, Dan....good thing I didn't buy the usual half dozen.....:cry:

One more tight atty should suffice.......:vino:
 

USMCotaku

Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Have anything worth a trade?
I just picked up another hadaly and then the thump, I'd consider getting rid of one of the hadaly for a decent trade, just not cash...

hmm, don't have much...most of my stuff isn't squonk related.
I have a house of zen kabuki that doesn't get much use...but it is p3 threaded for provari
have an iJoy Limitless rdta that also doesn't see any use.
A Moonshot rta
a smok baby beast
a tsunami 24 in black.

already pif'd away my unused mods :(
 

minimalsaint

Silver Contributor
Member For 3 Years
Member For 2 Years
Member For 1 Year
hmm, don't have much...most of my stuff isn't squonk related.
I have a house of zen kabuki that doesn't get much use...but it is p3 threaded for provari
have an iJoy Limitless rdta that also doesn't see any use.
A Moonshot rta
a smok baby beast
a tsunami 24 in black.

already pif'd away my unused mods :(

Sending you a message...
 

VU Sponsors

Top