The Merlin RTA by Augvape and Roxy

[dwcraig1]

I seem to have mine as I want it now. I installed the air reducer, 2 strand twisted ss430, 2.7 mm id, 6.5 wraps. Running at 38 watts on Dicodes 2380.
I set it up with EScribe with a DNA200. I also took a little off off the cooper 510 screws head, is wasn't sitting flush, almost, now it is.
It has found it's home.

 

[roxynoodle]

That is a classy set up!

 

[rolf 2]

just got rid of my 3mm coil.. and put in a 2.5 mm , rewicked with cello cotton this time .the new coil is a little lower ohms .. 1.08
still wapes nice either way . I was trying to find something to restrict the air some more for you who like it tighter but no luck from my junkbox parts which will fit . for me its just perfect with the screw left in . what you could try is a different , more restricted drip tip. which I am using now . like it better .
with 50 pg 50 vg juice using jfc about one third open . afc is about halv way open . no problems with feeding or leaking .
love this atty !!

 

[AmandaD]

I'm wondering, too.

I did, thanks! Just shoved it up even higher away from the juice flow

 

[roxynoodle]

A small bore drip tip definitely makes a huge difference for the m2l vapers.

 

[roxynoodle]

I did, thanks! Just shoved it up even higher away from the juice flow

So it's working the way you want now?

 

[fckaugust8th]

Ok, now to look for a narrow drip tip....

 

[rolf 2]

A small bore drip tip definitely makes a huge difference for the m2l vapers.

sure dos make a difference !

 

[roxynoodle]

Ok, now to look for a narrow drip tip....

It will be like night and day for you. The stock one is pretty wide, although it's comfortable. The cone shaped one we first did does have a smaller bore than the new one, but still isn't a m2l dt.

I do have some nice, US made 316ss drip tips for m2l that I should consider selling.

 

[roxynoodle]

There are reasons I wanted a 510 compatible drip tip for Boreas and Merlin. I wanted customers to have the option to change it and customize their vape.

 

[rolf 2]

Ok, now to look for a narrow drip tip....

seek and you shal find...lol...got mine from slowtech

 

[fckaugust8th]

seek and you shal find...lol...got mine from slowtech

Somehow, my idea of narrow and theirs do not match! It must be lost in the translation?

 

[fckaugust8th]

I do have some nice, US made 316ss drip tips for m2l that I should consider selling.

I'm calling dibs, just let us know, please!

 

[roxynoodle]

I'm calling dibs, just let us know, please!

I have a ton of them because they were my favorite DTs when I was strictly a m2l gal.

 

[AmandaD]

So it's working the way you want now?

I need to fiddle with it more - still not getting the flavor I was expecting. I have a 3mm spaced 316l coil currently, so I might try a clapton next!

 

[roxynoodle]

I'll disinfect some today. I actually have several attys I need to sell, so I'll try to get a classified ad up. If anyone is looking for high end m2l RTAs, I have a few I'm going to list, and all are in excellent condition.

 

[roxynoodle]

I need to fiddle with it more - still not getting the flavor I was expecting. I have a 3mm spaced 316l coil currently, so I might try a clapton next!

Play with your coil height, too. It may be a really nice coil, but will do better higher or lower.

 

[AmandaD]

Play with your coil height, too. It may be a really nice coil, but will do better higher or lower.

Yes, at the moment it's high, level with the posts!

 

[fckaugust8th]

I'll disinfect some today. I actually have several attys I need to sell, so I'll try to get a classified ad up. If anyone is looking for high end m2l RTAs, I have a few I'm going to list, and all are in excellent condition.

Calling Dibs! Any hints?

 

[rolf 2]

 

[roxynoodle]

Yes, at the moment it's high, level with the posts!

Try lower before you tear it out?

Calling Dibs! Any hints?

The Rose v2 is on hold for a friend while he plays with one of my clones to decide if he wants it.

Eviva-t, Gus Estia, Prometey v3 I need to sell.

 

[rolf 2]

these are the ones I like for m2l

 

[JuicyLucy]

Drip tip can make all the difference, that is for sure

 

[fckaugust8th]

@roxynoodle , I have the Rose, the building of it was not to my liking. I'll just have to keep an eye out in the Hardware section.

 

[TheKiddVapes]

Well I found the solution to being coil less, I have a Theorem that I opened and used their pre-built notched coil, it worked!! Once it was installed and removing the plug boy ,it was a different tank. Now with a single coil it's still a beast, nice clouds, no burnt or dry hits and it's just a damn nice tank. I kinda fell asleep with it and there were ZERO LEAKS!!

Sent from my SM-G925P using Tapatalk

 

[Nailz]

I have a ton of MTL drip tips, but using the one that came with the pico tank, nice little MTL drip tip and nearly matches my juice

 

[fckaugust8th]

@Nailz , that's good to know, I have a couple of those DTs around. I also have a few that fit on the kabuki, one of the on the moonshot.

 

[Huckleberried]

Just curious, for those of you using the screw, what tanks do you normally vape before you got Merlin?

 

[JuicyLucy]

Just curious, for those of you using the screw, what tanks do you normally vape before you got Merlin?

View attachment 51880

WTF? You get Sunday delivery?

Or are they enjoying illegal substances at the PO?

 

[rolf 2]

Just curious, for those of you using the screw, what tanks do you normally vape before you got Merlin?

View attachment 51880

batchelor, boreas modified with silicone insert..both single coils

 

[fckaugust8th]

Boreas and Alleria for DL, Barlog tank from@dre, Triton, Pico with CLR coil, kabuki with nautilus rba.

 

[fckaugust8th]

Mail delivery on Sunday? Now that is entirely too much!

 

[JuicyLucy]

kabuki with nautilus rba.

Can you post a link to the nautilus rba you are using on your kabukis?

Does it improve the flavor?

I loved my kabukis until I switched to RTA and have three of them that are now inadequate

 

[fckaugust8th]

@Huckleberried , I'm just curious, could you actually buy anything from Avail.com? So far, they do not ship to CA and NY. Wondering if they know that a successful internet business ought be able to ship further than city limits!

 

[AmandaD]

@Huckleberried , I'm just curious, could you actually buy anything from Avail.com? So far, they do not ship to CA and NY. Wondering if they know that a successful internet business ought be able to ship further than city limits!

I can't even get to the website - 'authentication error!'

 

[fckaugust8th]

Can you post a link to the nautilus rba you are using on your kabukis?

Does it improve the flavor?

Yes, the flavor was greatly improved. They are a bit of a PITA to build since the deck is really small. You'd need to use the Zephyrus glass in order to make up the height added by the rba to the kabuki. I'm tempted to buy the v2, the one place I read about it was saying it would fit the kabuki without the added height.
I tried to post the ebay link to the v2, I haven't ordered this one yet, I only used the v1. Look for vvtf on ebay.

 

[fckaugust8th]

I can't even get to the website - 'authentication error!'

Thank you Amanda, I just put them out of my mind, I will not bother with them.

 

[fckaugust8th]

@JuicyLucy , this is what the v2 looks like http://www.vvtf.com/vvtf-kabuki-rba-deck-nautilus-rba-v2/ and as I mentioned above, the only seller I fond is on ebay.

 

[fckaugust8th]

@JuicyLucy , here is a video clip

 

[JuicyLucy]

@JuicyLucy , here is a video clip

Thanks Brewbear

I used to love my Kabukis but now they are meh

 

[Huckleberried]

WTF? You get Sunday delivery?

Mail delivery on Sunday? Now that is entirely too much!

I've seen it happen, but highly unlikely. I took it as mocking me.

could you actually buy anything from Avail.com?

I got the same that Amanda got.

 

[Huckleberried]

Well I sure jacked that one all up.

 

[JuicyLucy]

Well I sure jacked that one all up.

We are torn between pity at your being tortured by the USPS and being green with envy

 

[fckaugust8th]

I used to love my Kabukis but now they are meh

I think I may just order one or two of these, they sure made a huge difference in the nautilus and kabuki. The only other place selling v2 is in England, I bought my first 2 from them (v1s) and it took almost as long as the 3 from gear..worst/best at almost twice the price.

 

[Huckleberried]

batchelor, boreas modified with silicone insert..both single coils

Boreas and Alleria for DL, Barlog tank from@dre, Triton, Pico with CLR coil, kabuki with nautilus rba.

Thanks you 2. Just trying to get an idea of airflow with and without before it gets here

 

[fckaugust8th]

Thanks you 2. Just trying to get an idea of airflow with and without before it gets here

I'll let you know Monday afternoon!

 

[Huckleberried]

I'll let you know Monday afternoon!

Maybe I'll let YOU know.

 

[fckaugust8th]

Maybe I'll let YOU know.

LOL, either way, we'll find out tomorrow!

 

[JuicyLucy]

I think I may just order one or two of these, they sure made a huge difference in the nautilus and kabuki. The only other place selling v2 is in England, I bought my first 2 from them (v1s) and it took almost as long as the 3 from gear..worst/best at almost twice the price.

I'd just like to be able to use them without feeling like I'm vaping hind tit

A good hedge for vapocalypse too if they work

 

[fckaugust8th]

I'd just like to be able to use them without feeling like I'm vaping hind tit

No, they are actually pretty good (the v1 at least). Unfortunately I don't see a group buy for the v2, eventually they will appear on slowtech and the others.
.....and what in the hell is hind tit?