Become a Patron!
The Official #HandCheck Thread
- Thread starter Chris
- Start date
Just hoping it's a DNA but not likely with Aspire.
CreamsicleFeeling a lil orange
Sent from my SM-G950U using Tapatalk
Sent from a Galaxy far far away
That's been my thing all along with the Mixx. That mod is just begging for a DNA 60.
Asguard mini w/ Gen3 - flavor seems muted on the Asguard mini, I started at 6mm and will have to shorten to 5.5 I think.
Is it just me or does the airflow adjustment make no sense? It moves over to the cotton if turned all the way around so it seems the airflow hits the cotton and some of the coil? Maybe it's just me and not enough coffee?
Sent from my SM-G975U1 using Tapatalk
Is it just me or does the airflow adjustment make no sense? It moves over to the cotton if turned all the way around so it seems the airflow hits the cotton and some of the coil? Maybe it's just me and not enough coffee?
Sent from my SM-G975U1 using Tapatalk
How you like the Gen? I always wanted one and just never did pick up. Always bigger and better out there. Lol
Sent from a pile of wood chips
Good looking comboAsguard mini w/ Gen3 - flavor seems muted on the Asguard mini, I started at 6mm and will have to shorten to 5.5 I think.
Is it just me or does the airflow adjustment make no sense? It moves over to the cotton if turned all the way around so it seems the airflow hits the cotton and some of the coil? Maybe it's just me and not enough coffee?
Sent from my SM-G975U1 using Tapatalk
Sent from a pile of wood chips
I love it. Have heard alot of gripes about the TC, but mine will never see it, lol. I love love love VV over VW. Don't see it much anymore.
Asguard mini w/ Gen3 - flavor seems muted on the Asguard mini, I started at 6mm and will have to shorten to 5.5 I think.
Is it just me or does the airflow adjustment make no sense? It moves over to the cotton if turned all the way around so it seems the airflow hits the cotton and some of the coil? Maybe it's just me and not enough coffee?
Sent from my SM-G975U1 using Tapatalk
You have the coils higher than I put, and I have them as close as possible to the edge of Ultem insert.
I also run 2.5mm 5 wrap at .106
Don’t know the length of the legs... but when I set the coils in they to touch the deck... then when I maneuver them they tighten up and raise up to the height that works best for me.
Sent from my iPhone using Tapatalk
This seemed to help as the coils are now lower and the flavor has improved some. Thanks I appreciate the feedback!You have the coils higher than I put, and I have them as close as possible to the edge of Ultem insert.
I also run 2.5mm 5 wrap at .106
Don’t know the length of the legs... but when I set the coils in they to touch the deck... then when I maneuver them they tighten up and raise up to the height that works best for me.
Sent from my iPhone using Tapatalk
Sent from my SM-G975U1 using Tapatalk
Don't be afraid to tear that out and rewrap them as 2.5mm 5 wrap... unless they are 26g cores, then it might prove, "Interesting" at .08Ω although tasty...This seemed to help as the coils are now lower and the flavor has improved some. Thanks I appreciate the feedback!
Sent from my SM-G975U1 using Tapatalk
Also, when you install the coils... let the coil hit the deck... tighten them in place... then manipulate the whole coil while pulling up... this will tighten up the coil so there is no lopsidedness to them... and really have no fear in pushing them side to side to center and keeping the spacing to almost none.
Youd be surprised how close you can put the coils to the ultem... I generally place them about 1mm away
We must have missed all the old cat checks.New cat check
Sent from a pile of wood chips
The ultem insert locks in place with the two little tabs that are on the top edge of the build deck so nope... the bottom edge of the cap is supposed to be 100% flush with the bottom of the build deck. Here's a few pics to show the coil placement in mine. (They're quad-core 26/36 Ni80 aliens at 3mm ID, dual coil at .08 ohms.)
Need to send it off, for a deep clean with someone more skilled. Still misfires sometimes.Yes!
She lived
Vaping incognito with the Smok RPM80 SE filled with Unicorn Frappe. Stuck in hospital for a few days due to an infection in my knee joint. Nurse caught me hitting my vape earlier and came in my room, closed the door... Told me to make sure the door was closed when I wanted to hit my vape, and try not blow clouds that hang around... And then she pulled out a Vaporesso PM80, hit it, smiled, and then left. I was dumbfounded! Lol.
That's awesome!
When I had my surgery I had to go cold turkey for 12 days!
Sent from a Galaxy far far away
That Dani looks great
That mod is really nice. How are you getting on with the C2MNT 2? I may not have given it enough of a chance but I sold mine to someone on here after a week...I loved the V1
Last edited:
This thing is sweet!
I made a slight modification to the switch, sanded the hell out of it and polished it.
Coupled with the Asgard Mini with the series deck it hits like a freight train!
Sent from a Galaxy far far away
I made a slight modification to the switch, sanded the hell out of it and polished it.
Coupled with the Asgard Mini with the series deck it hits like a freight train!
Sent from a Galaxy far far away
nadalama
Senior Moderator
Staff member
Senior Moderator
VU Donator
Diamond Contributor
Member For 4 Years
VU Patreon
I liked the V1 better as well.
I like it. I never had the first one so I can't compare, but I'm running a pair of Wismec 4mm notch coils in this one and it vapes great. What was the problem you were having with yours? From what I understand, the big difference is the orientation of the screws in the posts.
Do you have a cousin at Immortal Mods or something?Rainy friday
Sent from my SM-G950U using Tapatalk
I just didn't feel that there were any benefits to having the V2 really, I didn't really have issues with my og's twisting legs and already had 3 V1's.
I do not have the equipment to do voltage drop tests but with the exact build on a Vindicator with a fully charged battery I didn't feel that my black V2 hit nearly as hard as the V1.
I was gonna make a joke about old puppy checks, but I already did that with MrMeowgi and old cat checks.
A top notch rda
Sent from a pile of wood chips
For rdtl it is superb indeed. I got this authentic one on the cheap from somebody in the hardware forum who's identity escapes me at the moment. It also pairs up quite splendidly with this mod ?
Me? NahhhhDo you have a cousin at Immortal Mods or something?
Sent from my SM-G950U using Tapatalk
I'm working on a Profile right now. Always loved them single coil, and not squonking much right now, so trying to find that damn box with the solid pin..........Still one of my favorite Squonk set ups.
Furyan with the Profile mesh RDA
Sent from a Galaxy far far away
That's a classy looking set up ??
You've fallen?
