Vaping Underground PIF Box ~ LIVE & IN PROGRESS~

[otto85]

I want to try the 150 tc but there's like 15 mods I want to give toot

 

[BadLuckAndTrouble]

love mine still

Sent from a Ghost town

Did you have that laser engraved, or is it a vendor special?

 

[otto85]

Did you have that laser engraved, or is it a vendor special?

That is actually the sigelei "special edition" omni 150 Watt mod

 

[Geauxst]

Did you have that laser engraved, or is it a vendor special?

That's the limited edition Oni sigelei 150

Its an Oni demon

Sent from a Ghost town

 

[Geauxst]

That's the limited edition Oni sigelei 150

Its an Oni demon

Sent from a Ghost town

This is the closest I could find to what it suppose to be

Sent from a Ghost town

 

[Tina Ellis]

You need some wick I have plenty I can mail you some rayon probably last you a long time


Sent from a Ghost town

Yes I do! I appreciate everyone throwing some cotton or rayon into the box but it'll be the second box that I'll be able to grab ahold of it from.
@Geauxst, do you mean sending me some like in the next few days? If so then send away! I'd love to try it, especially since I'm out of stock of everything wicking related
Thank everyone very much BTW... This thread rocks!!

 

[Geauxst]

Yes I do! I appreciate everyone throwing some cotton or rayon into the box but it'll be the second box that I'll be able to grab ahold of it from.
@Geauxst, do you mean sending me some like in the next few days? If so then send away! I'd love to try it, especially since I'm out of stock of everything wicking related
Thank everyone very much BTW... This thread rocks!!

Yeah I ment to hold you over I'll mail you some

Sent from a Ghost town

 

[joby]

Any of u guys have use for 30 32g kanthal

 

[Geauxst]

Any of u guys have use for 30 32g kanthal

I only use that to make Clapton wire its to brittle for anything else IMO

Sent from a Ghost town

 

[joby]

How maney wraps

 

[otto85]

Yes I do! I appreciate everyone throwing some cotton or rayon into the box but it'll be the second box that I'll be able to grab ahold of it from.
@Geauxst, do you mean sending me some like in the next few days? If so then send away! I'd love to try it, especially since I'm out of stock of everything wicking related
Thank everyone very much BTW... This thread rocks!!

Rayon is really good stuff I love it, but as @Geauxst said make sure ur hands r super clean cuz the oils on ur fingers will disrupt flavor a little or don't touch the part that will actually be the wick, it's not to big of a deal after a day or so of vaping the body oils will go away and it's only noticeable because rayon is clean it doesn't have the little leaf particals like standard organic cotton does

 

[otto85]

I only use that to make Clapton wire its to brittle for anything else IMO

Sent from a Ghost town

I want to try some claptons but I can't deal with wire that small at all lol

 

[Geauxst]

How maney wraps

You misunderstand me I ment to make Clapton wire

As such

Sent from a Ghost town

 

[Geauxst]

I want to try some claptons but I can't deal with wire that small at all lol

Once you Clapton the wire its like 24g wire alot easier to use


Its good for flavor but I find they don't last and normal coils are easier to go back to

Sent from a Ghost town

 

[joby]

Gotcha my bsd but to actully do a clapton is it even worth it or just stick to duel macros/parelles

 

[otto85]

Once you Clapton the wire its like 24g wire alot easier to use


Its good for flavor but I find they don't last and normal coils are easier to go back to

Sent from a Ghost town

Ya I just can't work with small guage wire

 

[Tannerlee96]

G

 

[joby]

Is it really difficult to get into using nickle wire

 

[otto85]

Is it really difficult to get into using nickle wire

Not at all most important thing is to make the spacing between wraps close to uniform if 2 wraps r closer then the other I'll end up with a hot spot that's when ull get dry hits

 

[Geauxst]

Gotcha my bsd but to actully do a clapton is it even worth it or just stick to duel macros/parelles

If you got duals and macros down I'd stick with them and if one day someone is making some Clapton buy a bit off then to try out... They are cool but not as hyped as they seem.... personally I like Clapton's but I prefer parallel and micros over them

Sent from a Ghost town

 

[Geauxst]

Is it really difficult to get into using nickle wire

Its kinda like relearning building again but with a cheat sheet lol

Sent from a Ghost town

 

[joby]

I mean i have 100 feet of 30 and 32 so i can make a fuck ton of wire lol

 

[Geauxst]

Not at all most important thing is to make the spacing between wraps close to uniform if 2 wraps r closer then the other I'll end up with a hot spot that's when ull get dry hits

Fixed that problem with a common tool

A must for dual builds

Sent from a Ghost town

 

[otto85]

Fixed that problem with a common tool

A must for dual builds

Sent from a Ghost town

Lol Ya that works to

 

[Geauxst]

I mean i have 100 feet of 30 and 32 so i can make a fuck ton of wire lol

If that's all you have best option is making like a quad twist out of each I think if I remember right 4 wires twisted would be 30=24g and 32=26g

Sent from a Ghost town

 

[joby]

Really a screw for kanthal or just nickle wire

 

[Geauxst]

Lol Ya that works to

Makes it super easy now cause temp builds have to perfectly mirror each other otherwise they barly last a few days

Sent from a Ghost town

 

[joby]

I know its a big no no but i dont use an ohm meter wise for nickle or just shelk out the 25

 

[Geauxst]

Really a screw for kanthal or just nickle wire

Just nickel... Ni200 build have to be separated can't touch and have to be uniform for the build to work right

Sent from a Ghost town

 

[otto85]

I would do single nickel coils but tightening it down and adjusting that would keep the wraps uniform I never got around to locating said screw

 

[joby]

Ok thanks guys

 

[Geauxst]

I know its a big no no but i dont use an ohm meter wise for nickle or just shelk out the 25

You need a multi meter or ohm meter or mod that reads resistance their cheap 5-10$ get one please

Sent from a Ghost town

 

[Geauxst]

You need a multi meter or ohm meter or mod that reads resistance their cheap 5-10$ get one please

Sent from a Ghost town

So many people neglect using one and its the number one most important thing to have if you build specially with nickle

In fact I need to order me another one to free up my fluke meter lol

Sent from a Ghost town

 

[joby]

I mean ipv 3 has one but is it reliable

 

[Geauxst]

I mean ipv 3 has one but is it reliable

This is true but ipv also are famous for reading the resistance wrong after a while too... Just saying

Sent from a Ghost town

 

[Geauxst]

Don't get me wrong I use my mods to check resistance too but I have a ohm meter available and I have a multimeter as back up

Sent from a Ghost town

 

[otto85]

Don't get me wrong I use my mods to check resistance too but I have a ohm meter available and I have a multimeter as back up

Sent from a Ghost town

Always good to have something to make sure ur mod is still reading right

 

[joby]

Ok

 

[Tina Ellis]

You need a multi meter or ohm meter or mod that reads resistance their cheap 5-10$ get one please

Sent from a Ghost town

I've got to figure out a way to get one as well...I see all the peeps on YouTube using them all the time. I've also been checking mine with my ipv mini...I'm glad you mentioned that about them not reading right after awhile. I did not know that!

 

[Tina Ellis]

Yeah I ment to hold you over I'll mail you some

Sent from a Ghost town

I'm sending a PM now. Y'all are awesome

 

[Tina Ellis]

I'm sending a PM now. Y'all are awesome

Wait a minute... Do I need to? You already have it right?

 

[MOMABEAR]

Wait a minute... Do I need to? You already have it right?

Lol


Sent from my Momabear headquarters...

 

[Tina Ellis]

Anyone know how to rewick or recoil an Arctic tank coil?

 

[Tina Ellis]

Lol


Sent from my Momabear headquarters...

It doesn't take much to get me all confused

 

[Geauxst]

I've got to figure out a way to get one as well...I see all the peeps on YouTube using them all the time. I've also been checking mine with my ipv mini...I'm glad you mentioned that about them not reading right after awhile. I did not know that!

Yeah not all of them do it but alot of them tend to drop .1 ohm off

Sent from a Ghost town

 

[Geauxst]

Wait a minute... Do I need to? You already have it right?

Correct

Sent from a Ghost town

 

[Geauxst]

Anyone know how to rewick or recoil an Arctic tank coil?

I haven't messed with the article but most sub tank coils can be rebuilt

Sent from a Ghost town

 

[Tina Ellis]

I haven't messed with the article but most sub tank coils can be rebuilt

Sent from a Ghost town

I've tried... Its a beotch!

 

[djmunster]

Ive been rebuilding the artic with horizontal coils lately , its easier just using more cotton to fill the space
Wicks well no problems

Sent from my SGH-T999 using Tapatalk

 

[Tina Ellis]

Ive been rebuilding the artic with horizontal coils lately , its easier just using more cotton to fill the space
Wicks well no problems

Sent from my SGH-T999 using Tapatalk

How? How are you able to wick a round coil through a rectangular hole? Please tell me!