nice im running 4 2015 mkjo's in my v1 right now an they seem to be holding up pretty well but they cant handle anything below a .25
.65 ohms? Hmmmm I run mine at .12 ohms. Never tried any coils above .3 ohms. Dumb question, but did you put your batteries in correctly? Easy to mess that one up on the V2.ok iv been vaping for over a year now an i think i might need help with this one i just got my v2 with 4 new vtc5's fully charged an i put a dual clapton coil on it with the coil at .65 ohm an as soon as i hit the power button the coil just melted
Very nice!Hog v1& hog v2
Nothing hits like the HOG!Oh, have I been looking at this mod! It's very tempting.
I'm already running a authentic Buddha V2 on a Cherry Bomber V2 switch box in series mode.
You do mean .01 Ohms right? .1 isnt low at all, especially for these Quad Parallel Boxes.I was reading earlier in the post where you showed a .1 ohm build. My math comes to 705.6 watts. Scary. But what it's even scarier is the 84 amp draw this thing is pulling through your batteries at that level. Even vct batteries will max out at 60 amps. I'm glad you upped your ohm level. I bet it goes through the juice at 243 watts on your .29 build. Safe with the parallel but man that has got to hurt.
Don't forget the V1 is parallel, the V2 is paralleled series. V1 4.2v, V2 8.4v
I've been experimenting and right now I've got a quad twisted 28g 3mm inner diameter 10wrap dual coil build in my temple rda on the hammer now and it's perfect. I haven't checked the omh reading on it yet lol been using it for a week nowI was reading earlier in the post where you showed a .1 ohm build. My math comes to 705.6 watts. Scary. But what it's even scarier is the 84 amp draw this thing is pulling through your batteries at that level. Even vct batteries will max out at 60 amps. I'm glad you upped your ohm level. I bet it goes through the juice at 243 watts on your .29 build. Safe with the parallel but man that has got to hurt.
The Authentics are sold out and out of production...you'll have to buy a clone if you can find one!Where can I get one of these
I've ordered a V3, I'll let you know what I think of it and post some picsWas never really interested in owning one but I'm very curious about the V3 they have up on their site
I have one as well I like it alot definitely worth the money I used a Mason 40 mm for a while and now have the obese Buddha and the Buddha V2So how is it? Im thinking about getting one. Worth getting over a regualur dual? Show us something man! That is the quad 18650 Hammer of God!!
Sorry for that just realized how old that wasSo how is it? Im thinking about getting one. Worth getting over a regualur dual? Show us something man! That is the quad 18650 Hammer of God!!
How do you make this build please? Dead keen on trying it!View attachment 47031 iv been experimenting with a lot of different coils on the v2 an haven't yet found one that is a nice enough build that also doesn't burn out the cotton from the middle of the coil within a couple days any thoughts on something to build?
currently using a 24/.5 ribbon sabbertooth paralleled with 20 gauge kenthal around a 3.5mm 8 wrap
you have 2 series sets running in parallel so (assuming using 20 amp batteries like samsung 30q)How is amp draw split among the 4 batteries in para series?
Let's assume:
8.4v / 0.10 ohms = 84 amps
Is it 21 amp draw per battery?
I'm very sure in the way you come up with a safe limit for your batteries. Below are some safe guidelinesThank you
I don't mean to sound rude or discredit you but how sure are you?
I've searched a whole lot online but haven't found any info
I wasn't trying to do that by any means nor did I imply that because I made a video I'm an expert. All I did was say I was sure in my answer and that I have a video explaining it more in detail. But u are correct I should have linked the video, I just didn't have time to make a longer response when I replied to that.So... You are an expert if you post a video of something? (Because if it's on the net, it HAS to be true?) That was a narcissistic answer dude.
Provide him links to the info so he can read and study for himself. Don't just use the forum to self promote your channel man. You are not the only guy holding the award for vape knowledge.
To be honest, you could have either went back and edited the post, or requoted them and added helpful links. You didn't. But you did take the time, to explain why you are whoring your video.I wasn't trying to do that by any means nor did I imply that because I made a video I'm an expert. All I did was say I was sure in my answer and that I have a video explaining it more in detail. But u are correct I should have linked the video, I just didn't have time to make a longer response when I replied to that.
Sent from my SM-G935V using Tapatalk
I just edited the post to provide info since I have more time now.To be honest, you could have either went back and edited the post, or requoted them and added helpful links. You didn't. But you did take the time, to explain why you are whoring your video.
If you want to do videos that's fine. You want to link a video to something helpful (of yours) that others aren't doing, that's fine too. I have no problem with those things.
But lately, it seems, you are self promoting at every damn opportunity. You are not the only guy here with a channel on YouTube, but you seem to be the only one spamming your vids at every opportunity.
Instead of pimping yet another video, you could have helped the guy by providing links to other places supporting your claims. Not just whoring another of your videos in hopes of a few more views.
What brand of 18650s would you suggest for the v2 I'm planning on marring the battery's an iv done some research an iv come up with vtc5s but there non existent anymore except fakes
I do the same when I explain it...I always like to use water pipes to illustrate electrical circuits. For parallel vs serial I like to think of 2 pipes of the same diameter. If the water pressure is the same, the difference in volume of water you can move per unit of time between putting the pipes side by side (forming a pipe twice as wide) vs fitting them end to end (forming a pipe twice as long) is the basic idea behind serial vs parallel circuits. The resistance is the diameter of the pipe, the voltage is the water pressure, and the amps is the water itself. Be aware that this analogy works well to get a general understanding, but does break down when you start to dive deeper.
alright I'll ask here does anyone know what color scheme this is?
Ding ding!!!Big Gay Al's shirt?
lol
Well, the problem was, you were pimping YOUR video. You were making the discussion an end all at your video.I just edited the post to provide info since I have more time now.
You'll have to excuse me, some people come looking for help ask a question take the 1st response and never come back. I was using the tapatalk app on my phone and walking my kids to school, I didn't have time to make a long drawn out response but wanted to get him pointed in the right direction. I didn't want some crazy response we see at times where someone says it's safe to build stupidly low.
And my point of making the video was so we don't have to all keep repeating the same info over and over. I don't think a battery safety video is promoting my channel. it's much easier to listen and understand then it is to read long drawn out posts for a lot of people. Whats the difference in posting a video over a written post? you see it all the time. how many times we see people post reviewer videos when people ask for opinions on things. how many times do we link back to moochs blog. I fail to see the issue. If I'm doing anything out of line I sure haven't gotten any complaints or warnings from the mods. Bottom line is on a forum like this we are all adults. and we can all act as such. There is no reason for animosity towards each other(not saying you are, just in general). we can all enjoy the hobby and discussing it and helping new people. There are lots of knowledgeable people here for sure and it's a great place. Nobody wants to see people get hurt. 1st off because i don't wish any ill will towards anyone and 2nd off because it looks bad for vaping as people use it to "rally against ecigs" anything I can do to help prevent that I'm going to do. and I'm sure many others , like yourself feel the same way or you wouldn't have responded. If were all here to help and inform we should be able to do so with a mutual respect for each other. I think we are all past the age of being jerks to people just because we think it's funny or cool. If you have an issue I'm more then willing to discuss it. Hit me up with a PM and we can talk like adults, but lets try and keep the threads themselves as clean as possible so it's easy for people to find them and get the info they need
ahahahaha he's my favourite and Mr slave!Big Gay Al's shirt?
lol
Well, the problem was, you were pimping YOUR video. You were making the discussion an end all at your video.
If you want to be helpful, you could have linked other sources. THAT is helpful, IMO. Nothing wrong with saying "here is my video, in addition to these other sources of info".
It's great you want to help other people. Just don't make it a spam ad for your channel. If you are on the go, and can't answer a question the way it should be, just wait until you have time. The thread isn't going anywhere.
But if you notice the way others that ARE also YouTubers, they aren't always fronting their videos either. If people LIKE your reviews, you don't need to make them feel like you are shoving them down their throat either.
So no, I don't particularly have a problem with you. I just don't care for the spamming of your channel, that's all.
Hahaha, ***raises hand*** it's not that I don't like you:.. but I can assure you that you're garnering a rather bad reputation, as SIRSPAMALOT.I understand what your saying. I don't see it as spamming it's not like someone posts about something and I start throwing reviews out for completely different things. I use relevant videos and post when they are helpful. Like if someone asked if they should but a fuchai 213 plus I'd post my video on it.
On the flipside i do understand what you mean. Obviously I post my videos quite a bit. I get a lot of feedback and thanks from people however. At least 20 to 1 over people complaining. I've seen about 3-4 people including yourself make comments about it. And I know 2 of them personally don't like me so they'll complain about anything.
Not only that but I get 0 personal gain from my channel. It's expensive and time consuming and takes a lot of effort to make videos. But I enjoy it. I get no money no free stuff I don't put ads on my channel so it's not like I'm out for personal gain. If I was I could see it being a bigger issue for sure.
As far as other reviewers go I do see them do it as well. At least the ones that are regular members here. I didn't sign up just to pimp my channel. I was a member here before I ever started my channel. Also a site supporter. As long as I post relevant videos in relevant threads I don't see what the issue is.
Either way I'm always resonable and respectful of those that deserve it. I don't want to take this off topic so if u want to continue the discussion please PM me so we don't shit up a thread.
Sent from my SM-G935V using Tapatalk