?HUH?Sent from my iPhone using Tapatalk
Sent from my HT3 Pro using Tapatalk
?HUH?Sent from my iPhone using Tapatalk
And you are just a troll
Sent from my HT3 Pro using Tapatalk
Have fun with your imaginary parties.I'll be spending the weekend fucking your mother's tight arse.Get ready, it's the weekend Snake, we have parties to go to..
Hell, I paid $89 plus shipping for a Kabuki for my mini, lol
That was one of the only tanks that went hand in hand w/ the Provari that I hadn't tried yet. Do you know if it came out before or after the Russian91% or KFL? I don't know how but I missed my opportunity to try it somehow.
The p3 threading was one thing Prorape did right!Yeah but... P3 threads. That was one major fail for Provape. In theory a good idea - that no one wanted all that much.
Or you can get a clone at a much more reasonable price.And that I wholeheartedly encourage...Cheers!@POSE Not that I'm encouraging this sort of behavior, but you can still get a Kabuki with P3 threads - at the full retail price. ~> http://www.provarifuel.com/category-s/116.htm
In theory it makes sense.A wider more stable base to connect to gives you a better connection.Which means better energy conservation over time.Thus better battery life...Sigh too bad it would have to been as tall as it was wide to actually work.Yeah but... P3 threads. That was one major fail for Provape. In theory a good idea - that no one wanted all that much.
See my post above...Cheers!The p3 threading was one thing Prorape did right!
I really don't understand how that didn't take off. It's such a better connection between mod and atty all the way around.
Sent from my XT1650 using Tapatalk
Yeah but... P3 threads. That was one major fail for Provape. In theory a good idea - that no one wanted all that much.
Actually when the p3 just came out: house of hybrids, Kanger, aspire, typhoon and svoe all released p3 threaded toppers.Yup. Almost like the American Made Products "Rig Pig" threads, no other atty's caught on to that either. The only other company that did make the P3 threads were Svoemesto but still.. it wasn't enough to keep the doors open and kids in college.
But..
Something I am seeing catch on are the BF 510's aka squanking pins.
Actually when the p3 just came out: house of hybrids, Kanger, aspire, typhoon and svoe all released p3 threaded toppers.
When the p3 was seen as the failure that it was, svoe and house of hybrids were all that remained.
Sent from my XT1650 using Tapatalk
I have the KF5 P3 threading kit. It is a superior connector. Beefy....The p3 threading was one thing Prorape did right!
I really don't understand how that didn't take off. It's such a better connection between mod and atty all the way around.
Sent from my XT1650 using Tapatalk
The sad thing is that if Provape would of put out a 50W version of the P3, it would of killed in the market.Actually when the p3 just came out: house of hybrids, Kanger, aspire, typhoon and svoe all released p3 threaded toppers.
When the p3 was seen as the failure that it was, svoe and house of hybrids were all that remained.
Sent from my XT1650 using Tapatalk
No kidding! If the Procyon was the p3, we would have a different conversation.The sad thing is that if Provape would of put out a 50W version of the P3, it would of killed in the market.
The sad thing is that if Provape would of put out a 50W version of the P3, it would of killed in the market.
Oh yes, tea bags, fish filter, and removing the polyfill to make it a cheap dripper attyLarger threading to replace the "510" would be a welcome sight to the personal vaporizer market. A standard fine thread instead of an EXTRA fine thread would be nice too because it makes the threads deeper and more durable. Right now a 510 thread is a M7 x 0.5mm Thread. It would be nice if they just went to a M12 x 1.25mm thread. That would be a huge improvement. It would still be under 1/2 inch and lend itself to being more durable in the long run. Of course I have seen some magnetic connectors that are pretty nice too, but I still would like the threads better to ensure my tank doesn't just pop off of my mod. The "510" connection is the oldest and most outdated part of all new tanks and mods. It was the same thread used on the original "pen style" 510 kits I used to use 8 years ago. 110mah battery with little atomizers and cartridges. Does anyone remember the "tea bag" mod for the cartridges? If you do, you have been vaping a long time!!!! HAHA LOL
CV
Oh yes, tea bags, fish filter, and removing the polyfill to make it a cheap dripper atty
Oh yes, tea bags, fish filter, and removing the polyfill to make it a cheap dripper atty
Oh definitely. 10 watts max. And there was a while I thought those crazy sub ohmers were going to blow their fool heads off on mechs with a .8 coilBack then I was vaping 26 milligram juice.
Oh definitely. 10 watts max. And there was a while I thought those crazy sub ohmers were going to blow their fool heads off on mechs with a .8 coil
yup, using 5 amp CDR batteriesA few did
Finally somebody else gets it.I remember trying to decide between a Provari and a Darwin, but pre-ordered an Eclipse EQ instead.
Ended up with none of the above, and couldn't be happier that I didn't piss away hundreds on what quickly became obsolete junk.
I do find it funny that back in the day almost everyone gave the nod to the Provari over the Darwin. So much so that Evolv decided to abandon the idea of building their own mods and focused on providing chipsets to producers. Provape just rested on their laurels, all the while assuming their rabid fanbase would continue to purchase their overpriced archaic hardware.
Adapt or die. Provape made their choice. Good riddance.
I get it...Finally somebody else gets it.
Ya think?This is deja vu all over again!
LOL! Damn, I just sought help in finding a repairman for my Radius. Did not and never have promoted or advocated Provape at all, much less argue their supremacy to everything else. Sorry I scratched open someone's boils! I feel like I just ordered a steak in a vegan restaurant. I think people on both sides of this argument are a little thin skinned and should just relax and enjoy the vape of your choice. I have never understood the fanboy or "woman scorned" attitude to vape ware. Both sides seen to suffer from a "holier than thou" complex. Did a P3 rape your mother or something?
No, Provape raped their customers... Yourself included. Then the industry fucked them to death.LOL! Damn, I just sought help in finding a repairman for my Radius. Did not and never have promoted or advocated Provape at all, much less argue their supremacy to everything else. Sorry I scratched open someone's boils! I feel like I just ordered a steak in a vegan restaurant. I think people on both sides of this argument are a little thin skinned and should just relax and enjoy the vape of your choice. I have never understood the fanboy or "woman scorned" attitude to vape ware. Both sides seen to suffer from a "holier than thou" complex. Did a P3 rape your mother or something?
Just can't let it go can you? Your initial contribution to my request for help was not helpful or relevant. It was simply an opportunity for you to vent on a product about which you apparently have an emotional connection of some kind. I have tried sub ohm vaping and producing clouds of vaper and found neither to appeal to me. But when a practitioner of one or both of those vaping styles needs help I don't feel a compulsion to chime in with nothing but derision about their vaping choices. So, yes, irrational and obsessive.A simple singular comment on the matter hardly qualifies as either, but again, best wishes on repairing your paperweight.