F... THAT! I'd lose a whole handTry Kidney Puncher. They have up to 54g N80.
Dont worry soon you will have enough callous from building to take a machete onF... THAT! I'd lose a whole hand
Sent from my Nexus 6 using Tapatalk
LMAODont worry soon you will have enough callous from building to take a machete on
its a stitched alien, look on local vapes youtube channel, they have a vid of ohmboyoc and m.terk doing a tutorialA
are those interlocking?
Idk if they have 50g, but i get all my wire fron lightning vapes, best pricesI have a 1000ft -/+ of each wire under 32g but I recently started using more wires above 32g and Im realizing that 100/250ft rools dont even last a day or two so Ill be stocking atleast 1000ft of each and hopefully Ill find somewhere else besides Twistedmesses.com to buy 50g...they are wayyyyy out of line with their pricing on that site. Thanks for the tip though Ill try it with 22g/30g and see what happens.
Update on that Stapled Helix I built earlier, DO NOT use flattened wire as a alternative to ribbon, it doesnt react the same when bending and it is almost impossible to force it to bend into a coil and hold its edge and shape. I ruined almost the whole 3ft of wire I made and still didnt end up with a single coil.
26g/32g Staggerd Clapton (Sorry about Pic Quality)
Build for my Goblin Mini! The only part is not having alot of workroom for decent sized coils...I almost got a 30g/46g Fused Claptons to fit but it would have touched the barrel of the chimney...So heres what I got for now, 26g/36g Streched Claptons. Decent vape @ 30w-50w for sure!
Im going to try and do something good for my TFV4 Single RBA deck but Im lost for ideas, anyone care to share some?
Ill post my new build in the RBA, that fused clapton kept getting hot spot after it got wicked and went through cotton quickly. The new build is a 26g/34g clapton 8 wrap (1.35 Ohms) and its perfect at 55w. 1.0+ is way high for me but its a warm vape and produces AMAZING flavor. I was checking out the T%F-R2 and TF-RCA rba's, still cant decide on which I want....View attachment 33594
This is what i have in the TFV4 right now and its working GREAT! Nice flavor, good vapor production, had it in about a week, at about 35 watts
The single rba airflow is tight, I wanted a looser draw and more room. The dual rba's look to have a better method of trapping the wire also. The reason Im now looking into it is my Quad head is dead and the triple head got a dry hit the first draw....I soaked both heads in a container of juice for 45 minutes then tried them both, Im guessing it has a hot spot...I may try a go at rebuilding the quad but in the mean time Im still deciding at which RBA. I think Im going to go with the TF-R2...since it has more airflow and the post setup isnt a gimmick like on the RCA rba.Yea the only difference i heard for the RBAs for the TFV4s are one is for singles an the others are for duals, even the RCA, they said its just a dual setup, maybe more room? I just have the single setup which is fine, i havent even use the quad coil that comes with it, i used the trip which ate juice so i know thw quad will too, thats why i like the single RBA, i get good flavor and save a good amount of juice @raymo2u and i heard the snow wolf is amazing
Ohh dang, i kinda like that, i was thinking of ordering the titanium heads, but that looks temptingThe single rba airflow is tight, I wanted a looser draw and more room. The dual rba's look to have a better method of trapping the wire also. The reason Im now looking into it is my Quad head is dead and the triple head got a dry hit the first draw....I soaked both heads in a container of juice for 45 minutes then tried them both, Im guessing it has a hot spot...I may try a go at rebuilding the quad but in the mean time Im still deciding at which RBA. I think Im going to go with the TF-R2...since it has more airflow and the post setup isnt a gimmick like on the RCA rba.
TF-R2 RBA:
TF-RCA RBA:
If you can fit 2 Wires on each side of each screw and it have more airflow then Fused Claptons/Aliens and other coils would be much easier to put on it, plus the Layout seems to be much easier the the TF-R1 that Im using now. I found a bunch of them on Ebay for less then 10 shipped so I think Ill order one tonight.Ohh dang, i kinda like that, i was thinking of ordering the titanium heads, but that looks tempting
Definitely can't back it off if you mess up. Doing that will distort the alien clapton and that part of the wire is unusable. You can stop, but you just have to be really careful that you don't stretch the alien clapton, or distort it. Again if you do that part is junk.Ive made a couple good alien builds, but ive been trying to perfect them lately, and it seems you have to get it all in one go, if you stop or backtrack, it messes up the whole thing, anybody else?
Not necessarily, but it is easier if you just get the angle and pressure right and go FAST! For me anywayIve made a couple good alien builds, but ive been trying to perfect them lately, and it seems you have to get it all in one go, if you stop or backtrack, it messes up the whole thing, anybody else?
Your going to make a Wickless Build?Nice build @raymo2u , ive also had an idea pullin the strings of my mind, its gonna be a coil that is basically a wick, im talking so many juice channels, itll hold puddles of juice, im gonna jump on it now, but for now, heres something i whipped up because that staple staggered got gunky
View attachment 33688
Nice! But nah not wickless, but its gonna have a ton of juice channels, like the coil itself will be a wick, if it works out how im thinking it will, it should hold a couple mls of juice by itself, then with it being wicked, JUICE CITY!! LolYour going to make a Wickless Build?
I also made a monster tonight....
From Earlier-4 x 26g Core/ Flattened 24g Frames/32g Staple Build (Slightly Flattened) Staged with 26g/32g Clapton (.079 Ohms) -Beast of a Build-
You've definitely got my attention!if it works out how im thinking it will, it should hold a couple mls of juice by itself
When wrapping the coils for anything other than a standard macro build I always use a set of nylon pliers. Hold the wire to your bit and start the first wrap manually, after that grab with the players and turn it while you wrap and it will wrap perfectly. Might take some tweaking and some pressure but it works, nice build by the wayDecided to try another stitched alien. I'm really happy with the way the wire came out. The coils - not so much. i couldn't get them to lay flat as I wrapped them. They're 30K cores with 40N Clapton and stitch. Then I tried to give them some color. There are no computer enhancements on the coil coloring. Just heat and sunlight.
If you make that wire again and are worried about it laying flat use a hammer and slowly go over the whole wire tapping it, that way it flattens out enough to lay flat and it usually adds to the look of the wire, not to mention makes a great contact surface for the wick.Decided to try another stitched alien. I'm really happy with the way the wire came out. The coils - not so much. i couldn't get them to lay flat as I wrapped them. They're 30K cores with 40N Clapton and stitch. Then I tried to give them some color. There are no computer enhancements on the coil coloring. Just heat and sunlight.
Not if you go lightly....If you look back on some of my flattened builds they have had 36g/38g/40g/46g when being flattened. You dont want to slam on the wire but just enough to make the very top and bottom layer have a flat shiny surface....Figaro jewelry is a good example of what your trying for...That won't kill the 40g? That stuff's pretty sensitive...
I'd hit itSo my wire came in today and I decided I would try make the smallest Fused Claptons Ive ever tried so I could fit them in the TF-R2 RBA without hassle, they are smaller then the Fused Clapton I made yesterday.
Here is the the steps Ive taken going smaller and smaller for the wire....The wire to the lower left is 24g and 26g above it, to show the comparison on how small these damn things are...I accidentally dropped the wire after wrapping them with the swivels and I had a hard time finding the wire-and it landed in my fucking lap!
Heres the new build on the TF-R2. 32g/44g Fused Claptons, 7 wraps on a 3mm bit @ .63 Ohms. Its great at 42w so far and I just broke them in...
started on one last night, I need one of you guys to perfect it though. Take 26 ga and Clapton with 36 ga. Do this to a piece about 18 long. Now cut a 6 inch length of the wire and clip it off. Decore that wire as you would with an alien, now cut the other 12 inch Clapton into two 6" pieces. Put them in the drill Chuck parallel and take your decored Clapton and wrap it around the two paralleled Clapton's. It gives an alien appearance but I didn't have swivels to keep my wires held correctly. If you guys have time try it out and let me know how it works. I will continue to try it today.
Good thing about working weekends I have week days off.
Sent from my Nexus 6 using Tapatalk
Yes simplifying at its best lolSo a two core alien where the cores are claptons?
Sent from my iPhone using Tapatalk
Actually its a FUSED Clapton...Fused with a Clapton...Claptoned...Clapton..A Clapton claptoned with a Clapton? It's coil inception....
Sent from my iPhone using Tapatalk