I had the 75 before the 150. Used to love sigelei mods
Sent from my Nexus 6P using Tapatalk
Become a Patron!
The Official #HandCheck Thread
- Thread starter Chris
- Start date
Sent from my Nexus 6P using Tapatalk
Vape Fan
_evil twin_
Staff member
Senior Moderator
VU Donator
Platinum Contributor
Press Corps
Member For 5 Years
It's called, shiny moditis.
I started with a boxer clone. Last week I spent over 200 on mods. It gets deep man be careful.Squonking is awesome. Already fighting myself on whether or not I should buy a better one.
Sent from my SM-G950U using Tapatalk
Sent from my Nexus 6P using Tapatalk
I spent a few hundred lately on mods and tanks so I could sell some of those. Just don't want to regret it lol.
Actually selling my modefined Sirius today.
Sent from my SM-G950U using Tapatalk
Nice mod. Someone is getting lucky. Can't buy anything else until I get my tax money. Warden's orders. Ha ha
Sent from my Nexus 6P using Tapatalk
Try a Switchfet type one , i have mech sqounkers and regulated ones , so next was switchfet type. .Squonking is awesome. Already fighting myself on whether or not I should buy a better one.
Sent from my SM-G950U using Tapatalk
All are good but a mix of both without having to clean contacts to maintain a good output is best, i get around 2 full bottles out of single cell.
From the Noisey Cricket V2 25mm BF'd , It has turned out to be fantastic sqounker conversion size shape fits hand well,
Think i might make another ,
can be done in a day now i know what im doing
Put a guide up on vaping underground on doing it.
Sent from my ONEPLUS A3003 using Tapatalk
Hades 26650 with Aromamizer Plus Big Boy Glass....all day all nite..and then some vape
Sent from my SAMSUNG-SM-G935A using Tapatalk
Sent from my SAMSUNG-SM-G935A using Tapatalk
Nice setupHades 26650 with Aromamizer Plus Big Boy Glass....all day all nite..and then some vape
Sent from my SAMSUNG-SM-G935A using Tapatalk
Sent from my Nexus 6P using Tapatalk
I'm usually just in the Bonkers thread, need to do some catching up here on the handcheck state of the nation!
Enjoying a great Saturday... next two days off, fridge full of groceries, rent is paid, new vape toys and the Big Game tomorrow...
Next level HappyPlace achieved
Enjoying a great Saturday... next two days off, fridge full of groceries, rent is paid, new vape toys and the Big Game tomorrow...
Next level HappyPlace achieved
I've been considering it as well.Still think I need one of those
Sent from my iPhone using Tapatalk
Sent from my SM-N950U using Tapatalk
Running Capone in my wraith right now. F'n delicious.Mmmmmmmm
Sent from my SM-N950U using Tapatalk
Sent from my Nexus 6P using Tapatalk
And all this time I thought I was the only one. LolMy fuck football hand check. I know. I know. It's unAmerican, but I really just don't like football.
Sent from my Nexus 6P using Tapatalk
Sent from a Galaxy far far away!
So my wife watched the game and I got sucked into the Justin Timberlake half time show. Being a drummer the damn marching snares caught my attention. I have to say the prince tribute was pretty amazing. Go Bears. Ha ha
Sent from my Nexus 6P using Tapatalk
irradiated
Member For 4 Years
Fev v4.5 on VG 2.5
Pocket bf RDA on Noisey Cricket V2 /bF mod
2 single Cell , Single Coil Cloudy Vapes.
Sent from my ONEPLUS A3003 using Tapatalk
I think I know what I need to do with my Cricket II now.... that's awesome man, looks really clean (I'm assuming you modded it yourself?). Wismec should start selling a Cricket II squonker..
The conversion was simple yeah? Since putting it into parallel mode it will fire on one battery anyway. Basically would just need the cutout and squonk 510 + bottle.. hmmmm.
PS. How is the finish on your Cricket so nice, it must be pretty new. The brushed stainless stuff rubbed off just from being held in my hand after a couple months, it looks like it's been dragged through hell even though I'm gentle with my mods.
irradiated
Member For 4 Years
Vaping.Trucker
Member For 1 Year
Got that Purple Monster 225 mod from @vapeporn. Today is guaranteed to be super moist with the drip tip on this one!
"We don't lick other people!" is just another lie adults tell kids.
"We don't lick other people!" is just another lie adults tell kids.
CrazyChef v2.0
Gold Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Reddit Exile
VU Patreon
You ain't right in the head.
Vaping.Trucker
Member For 1 Year
I bet you laughed, tho.
"We don't lick other people!" is just another lie adults tell kids.
"We don't lick other people!" is just another lie adults tell kids.
It will polish up with fine grit seems to have a tin or ss look coating , but if you go too far you reveal the copper lining it has , before hitting the zinc alloy i tried polishing out a scratch hence i iknow has copper coating under itI think I know what I need to do with my Cricket II now.... that's awesome man, looks really clean (I'm assuming you modded it yourself?). Wismec should start selling a Cricket II squonker..
The conversion was simple yeah? Since putting it into parallel mode it will fire on one battery anyway. Basically would just need the cutout and squonk 510 + bottle.. hmmmm.
PS. How is the finish on your Cricket so nice, it must be pretty new. The brushed stainless stuff rubbed off just from being held in my hand after a couple months, it looks like it's been dragged through hell even though I'm gentle with my mods.
, But the mod once done is pretty sweet , good power through out , down to its 3.3v cut off , ive Ordered more supplies/ parts to do another will try do this one better
Since i got jist of how too now. First was a prototype to see if it was possible.
So im pretty impressed with how good it hits very little difference to a full mech.
Also ordered larger / taller mod maker bottles. Be arriving this week,
these new ones are supposedly 9.2ml so should hold 8ml or s with tube and only need refilling on each new cell. same width same cap just taller ,
Sent from my ONEPLUS A3003 using Tapatalk
Last edited:
irradiated
Member For 4 Years
It will polish up with fine grit seems to have a tin or ss look coating , but if you go too far you reveal the copper lining it has , before hitting the zinc alloy i tried polishing out a scratch hence i iknow has copper coating under it,
But the mod once done is pretty sweet , good power through out , down to its 3.3v cut off , ive Ordered more supplies/ parts to do another will try do this one better
Since i got jist of how too now. First was a prototype to see if it was possible.
So im pretty impressed with how good it hits very little difference to a full mech.
Also ordered larger / taller mod maker bottles. Be arriving this week,
these new ones are supposedly 9.2ml so should hold 8ml or s with tube and only need refilling on each new cell. same width same cap just taller ,
Sent from my ONEPLUS A3003 using Tapatalk
So you went through the outer layer, the copper layer, and down to the zinc when you sanded it? Or you just polished up the outer layer to get rid of the odd coating that comes off on it's own? Making it look less ugly would be a big improvement by itself.
Make sure to share your 2nd build, I'll be watching with interest. I have a nice soldering station but no dremel.. I could probably borrow one though, idk. I have an OG Goon and a squonk pin for it, but no squonk mods. Cricket II is definitely a really nice box mod to hold in the hand.
Depends on how deep your marks are , if only tatty on surface then most will come out with light sand with fine paper if deeper you will end up removing too much , Although it will still come up ok front the bf holes ive cut i can get that smooth an shiny just not as shiny as the actual mods coating ,So you went through the outer layer, the copper layer, and down to the zinc when you sanded it? Or you just polished up the outer layer to get rid of the odd coating that comes off on it's own? Making it look less ugly would be a big improvement by itself.
Make sure to share your 2nd build, I'll be watching with interest. I have a nice soldering station but no dremel.. I could probably borrow one though, idk. I have an OG Goon and a squonk pin for it, but no squonk mods. Cricket II is definitely a really nice box mod to hold in the hand.
top layer is the shiny one ,
im assuming the micro thin copper layer helps it transfare heat and conductivity.
since the neg on 510 is through the top plate of the mod no wires or terminal to connect
You could also go with either the nc v2 mod sleeve (silicone) or a mod wrap , then can be any colour you want , or strip it and spray it?
You can see the front of top plate , i sanded a little , since i marked it removing old 510, you can see that the mod and atty are slightly shinier that the top plate due to removing the coating
So lost its SS shine ,
Sent from my ONEPLUS A3003 using Tapatalk
Hopefully next one i can do perfectly , hopefully if Dremel dont slip this time,
These little guys do good.... I have the (3) cell version....Running a little red setup today
Sent from my Pixel 2 using Tapatalk
Sent from my Z981 using Tapatalk
Vaping.Trucker
Member For 1 Year
Such smooth. Many tasty.
"We don't lick other people!" is just another lie adults tell kids.
"We don't lick other people!" is just another lie adults tell kids.
Clear coat over resin Pico running NFE firmware, and a Youde Goblin V2 in small tank config.
Last edited:
Then get a Nasy squonker
Modz By Nasy dual squonker pwm, crazy cool custom-etched by Nate, w/Cthulhu Gaia rdta has been my go-to since I got her in Sept... never thought I'd say that about a squonker, lol
Vaping.Trucker
Member For 1 Year
...
Some #ITCvape puddin #9 stuff is good.
Using serpent mini on wismec ravage.
Using serpent mini on wismec ravage.
How do you like the mag kit? My wife has been thinking about it but not sure if it's worth the cash...
Sent from my R1 HD using Tapatalk
