Become a Patron!

The official VAPE MAIL!!!!!!! thread #2

dubya314

dubya314

Platinum Contributor
Member For 5 Years
Another great vapemail day :bliss: I got my two pieces of plastic from I don't remember where, that they had to make sure I was 21 three times :deadhorse:
1602133554582131262957.jpg
Weird the difference, but on a Billet
1602133825939132275220.jpg
And one that checks 3 boxes for me. Well, 4 if you count my inability to pass up an unbelievable deal. Always wanted an Authentic Purge, and B2B to be exact. Check. Always wanted a Kennedy, check. Always wanted a quality, vintage looking mech set up, check. Thanks @marter , damn thing is gorgeous, already setting it up :p
16021347856022123762057.jpg
 
S

SUKMYVAPOR

Bronze Contributor
Member For 4 Years
I got it for 150 ..the way I see it long after the other mods have died this thing will be kicking and used a 20 % off code was 160 on the site.. my last hurray you might say .before all these incredible things disappear. Trust me I'm the guy buying cloned kayfuns from FT
 
S

SUKMYVAPOR

Bronze Contributor
Member For 4 Years
SUKMYVAPOR said:
I got it for 150 ..the way I see it long after the other mods have died this thing will be kicking and used a 20 % off code was 160 on the site.. my last hurray you might say .before all these incredible things disappear. Trust me I'm the guy buying cloned kayfuns from FT
Click to expand...
This is what I have been vaping on wanted to treat myself 4 once
 

Attachments

  • 16021358706515224293916978346201.jpg
    16021358706515224293916978346201.jpg
    1.3 MB · Views: 20
Carambrda

Carambrda

Platinum Contributor
ECF Refugee
Member For 5 Years
dubya314 said:
Impossible to not LOVE that thing!
Click to expand...
It is absolutely very much possible to not love that thing, unfortunately. This is simply because, as Daniel (DJLsb Vapes on YouTube) pointed out in his video review, that thing breaks if you try to dry fire coil builds below 0.1 ohm with it so, despite the user manual clearly states that it doesn't support firing below 0.1 ohm, it still does allow the user to try this anyhow causing it to break... IMNSHO this kind of defeats the whole purpose of going for a dual battery ohms reader.
 
Huckleberried

Huckleberried

VU Donator
Diamond Contributor
Member For 5 Years
VU Patreon
dubya314 said:
Another great vapemail day :bliss: I got my two pieces of plastic from I don't remember where, that they had to make sure I was 21 three times :deadhorse:
View attachment 170716
Weird the difference, but on a Billet
View attachment 170717
And one that checks 3 boxes for me. Well, 4 if you count my inability to pass up an unbelievable deal. Always wanted an Authentic Purge, and B2B to be exact. Check. Always wanted a Kennedy, check. Always wanted a quality, vintage looking mech set up, check. Thanks @marter , damn thing is gorgeous, already setting it up :p
View attachment 170718
Click to expand...
Check you out with your red doors and red jammies! @bx10r got nothin' on ya, bud.
 
MrMeowgi

MrMeowgi

The Vapin' Drummer
VU Donator
Diamond Contributor
Member For 4 Years
SUKMYVAPOR said:
Wanted a good parallel full mech ... and of course had to get my favorite color.. now I am officially in debt till the day I die lol but what a beautiful mod and it hits like a truck .. like they say can't get blood from a stone
Click to expand...
Ha ha you never met my wife. She bleeds stones well.

Sent from a pile of wood chips
 
dubya314

dubya314

Platinum Contributor
Member For 5 Years
Carambrda said:
It is absolutely very much possible to not love that thing, unfortunately. This is simply because, as Daniel (DJLsb Vapes on YouTube) pointed out in his video review, that thing breaks if you try to dry fire coil builds below 0.1 ohm with it so, despite the user manual clearly states that it doesn't support firing below 0.1 ohm, it still does allow the user to try this anyhow causing it to break... IMNSHO this kind of defeats the whole purpose of going for a dual battery ohms reader.
Click to expand...
I didn't know that. That does suck. The purpose for me was to swap the batteries half as often as the 521 tab, so did not defeat for me.
 
gsmit1

gsmit1

Platinum Contributor
Member For 4 Years
Carambrda said:
It is absolutely very much possible to not love that thing, unfortunately. This is simply because, as Daniel (DJLsb Vapes on YouTube) pointed out in his video review, that thing breaks if you try to dry fire coil builds below 0.1 ohm with it so, despite the user manual clearly states that it doesn't support firing below 0.1 ohm, it still does allow the user to try this anyhow causing it to break... IMNSHO this kind of defeats the whole purpose of going for a dual battery ohms reader.
Click to expand...
I saw that, but the vast majority of people don't build below .1 the vast majority of the time.

It's what amounts to a parallel direct output device. It will actually give the combined capacity of both batteries, but will also operate on a single.

Daniel also said that it reads resistances accurately. However, with the quick experiment I did with the voltage drop attachment I didn't have the resistances jumping around like he said he did. It's short protected, which I also tested and that works too so no worries about the 510 on the attachment, but mine protrudes just enough to be alright anyway.

Here's a good one. I grabbed an RDA I had laying around with a build in it and put it on my old 521 mini tab, this new 521 tab plus and my Centaurus and all three read .13 :D

It does need stronger alligator clips to get a reliable resistance reading for the coil tester.
 
Carambrda

Carambrda

Platinum Contributor
ECF Refugee
Member For 5 Years
gsmit1 said:
I saw that, but the vast majority of people don't build below .1 the vast majority of the time.

It's what amounts to a parallel direct output device. It will actually give the combined capacity of both batteries, but will also operate on a single.

Daniel also said that it reads resistances accurately. However, with the quick experiment I did with the voltage drop attachment I didn't have the resistances jumping around like he said he did. It's short protected, which I also tested and that works too so no worries about the 510 on the attachment, but mine protrudes just enough to be alright anyway.

Here's a good one. I grabbed an RDA I had laying around with a build in it and put it on my old 521 mini tab, this new 521 tab plus and my Centaurus and all three read .13 :D

It does need stronger alligator clips to get a reliable resistance reading for the coil tester.
Click to expand...
I already grabbed the Odin DNA 250C just so that I can dry fire at whatever the resistance I might need. ?

giphy.gif
 
wildgypsy70

wildgypsy70

“Widgy Pidgy”
Staff member
Senior Moderator
VU Donator
Platinum Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
Huckleberried said:
Well I went to Fatdaddy and the only thing that I could find wasn't available. I was going to get the 2.5 and the 3, but they're OOS.


I'ma behave.

Mine measured the same, according to a ruler. I don't have one of those fancy dancy calibrator thingamabobs. I saw some stuff at FT, but really there wasn't a ton of pins there, which I thought was weird.

If either or both of ya want to send me a pin, I'd happily pay for shipping.
Click to expand...
I’m not.

A7B89CF9-3A4C-4CEF-A0B3-116365E01B71.jpeg
 
Just Frank

Just Frank

Platinum Contributor
Member For 5 Years
I ordered a matte black Vandy Vape Mesh V2 from the Best Vape about 2 weeks ago. It finally showed up today.
20201008_174223(1).jpg
20201008_174447_HDR(1).jpg

Had to mention, the mesh size is similar to the Hadar. The Hadar has it beat in width by 2mm though. MV2=10mm (or 1CM) - Hadar=12mm
 
Last edited:
marter

marter

VU Donator
Silver Contributor
Member For 4 Years
MrMeowgi said:
Ha ha glad it made it safe. Baphomet should be here tomorrow I hope. Running late. Lol

Sent from a pile of wood chips
Click to expand...
Yeah, I saw that. They had it listed as arriving today but then said it's running late. Hope it gets there tomorrow.

And thanks for the Dani, I'm looking forward to learning about it. And the carving. Amazing what can come "from a pile of wood chips".
 
Tornadoalleydeb

Tornadoalleydeb

Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
Pastorfuzz said:
Big Thanks to @debinnv for the presents.
This Custard you made is the shit little girl!View attachment 170750
Click to expand...
I'm glad you like the goodies. Everyone should have one of the OG Aromamizers! and thanks about the juice, it does seem to be my most popular. @Bigrick said the same about it when he tried it :) That makes me happy!
 
Tornadoalleydeb

Tornadoalleydeb

Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
Pastorfuzz said:
Finally got my Vapor Range order after the USPS decided to give it the 2 week tour of the fires out west.View attachment 170751
Click to expand...
You're welcome LOL Ain't I a stinker. But at those prices......................oooh you got the Luna. I was so tempted to snag one of those black mosiac ones, but without seeing it in person...... How is it? I still have a pretty blue one I bought from @gadget! a long time ago. You will like those if you have never tried one before.
 
Bigrick

Bigrick

Gold Contributor
Member For 4 Years
ECF Refugee
@debinnv's custatd is amazing. My only complaint is that the bottle gets empty so darn quickly. But really, incredible stuff. It is definately some of the best juice I have ever vaped. Her french toast with maple syrup is also excellent. I do not know so hard to choose which one I like best. I guess I will just vape both (alternating) simultaneously. Your the best @debinnv. I think I speak for many when I say we love you!
Peace and love to all.
Rick
 
Wb80

Wb80

-DIY-demon-
VU Donator
Gold Contributor
Member For 4 Years
VU Patreon
Bigrick said:
@debinnv's custatd is amazing. My only complaint is that the bottle gets empty so darn quickly. But really, incredible stuff. It is definately some of the best juice I have ever vaped. Her french toast with maple syrup is also excellent. I do not know so hard to choose which one I like best. I guess I will just vape both (alternating) simultaneously. Your the best @debinnv. I think I speak for many when I say we love you!
Peace and love to all.
Rick
Click to expand...
Try her strawberry rice pudding. Delicious
 
Just Frank

Just Frank

Platinum Contributor
Member For 5 Years
Smok Rigel Kit and some orange light up baby prince coils.
20201009_122834(1).jpg
20201009_122935(1).jpg
20201009_123105_HDR(1).jpg

I had no plans to get any more Rigel kits. I already have black and silver. Somebody posted a picture on Reddit of theirs and I saw the tank..
20201009_123118(1).jpg

It's a different color blue TFV9 than the one I bought as a separate purchase. The one I got was the classic blue they've been doing for years. I made the decision to collect their regular Blue tanks this year and that turned into collecting all of their Blue tanks. I saw it and had to have it lol. Here's a comparison photo-
20201009_124153(1).jpg
 
gsmit1

gsmit1

Platinum Contributor
Member For 4 Years
Just Frank said:
Smok Rigel Kit and some orange light up baby prince coils.
View attachment 170790
View attachment 170791
View attachment 170792

I had no plans to get any more Rigel kits. I already have black and silver. Somebody posted a picture on Reddit of theirs and I saw the tank..
View attachment 170793

It's a different color blue TFV9 than the one I bought as a separate purchase. The one I got was the classic blue they've been doing for years. I made the decision to collect their regular Blue tanks this year and that turned into collecting all of their Blue tanks. I saw it and had to have it lol. Here's a comparison photo-
View attachment 170794
Click to expand...
I hope that's the shape of things to come. Their "prism" colors are played out. Never was a huge fan anyway. The paint looks much better. Let's see how it lasts.
 
Just Frank

Just Frank

Platinum Contributor
Member For 5 Years
MrMeowgi said:
Got the rdta in today. Hoping these cables will really keep up. Anyone else have one?
3a85a9c9361a12dbcef25e9e238762f5.jpg


Sent from a pile of wood chips
Click to expand...
I'm using a Vandy Vape Mato right now that has those cable stick things. I'm not sure if they do much. I used a Geekvape Avocado 24 for about a year. I never had trouble with the coil being dry. Even when it got low, the tilt from hitting it was enough. I haven't tried the Mato without yet but I'll have to.
 
Ms. Trixy

Ms. Trixy

VU Donator
Platinum Contributor
ECF Refugee
Member For 5 Years
Reddit Exile
VU Patreon
No vape mail here. I'm trying to remember who it was that just ordered a boatload of 18650s....other than Proline.
 
Carambrda

Carambrda

Platinum Contributor
ECF Refugee
Member For 5 Years
MrMeowgi said:
It is quite large for sure.

Sent from a pile of wood chips
Click to expand...
You could always decide to make it larger, eh?
carrackvape.com

Isolation Tank RTA

[additional]With two barrel options (a gorgeous engaved metal tube with a glass window, or a full-glass barrel), an extremely smooth perforated adjustable airflow ring and a solid top cap with smooth, short threads, this RTA is the real deal. The Isolation Tank is available in 4 gorgeous...
carrackvape.com carrackvape.com
 
natebuchanan

natebuchanan

Member For 4 Years
So a few months ago, one of the Chinese sites was selling the Ultroner Mini Stick for $20, so I picked one up. They’re usually like $70-90, so I feel like I got a good deal on it. It’s an 18350 mod that I use for my MTL atty’s that are 24mm. I’ve loved it so far. Anyway, I saw this Takit Mini V2 by Cool Vapor (?) for like $15 on a different Chinese site a few weeks later, and it just got here today. The gap pictured between the QP Gata and the mod is only because I unscrewed it to show the atty. This thing is great. It has a mosfet like the Ultroner, but unlike the Ultroner, it lights up (green) to show when a battery is connected, when you turn it on and off, and while firing. It comes with both an 18350 AND extension to support 18650, resin sleeves for both, and the stabwood sleeve from the Ultroner fits perfectly on it, and vice versa with the resin on the other. It performs as well or better than the Ultroner, and the price difference is ridiculous. 7C8D148D-2557-43AB-ACFF-C6BFE842893E.jpeg
 
~Don~

~Don~

Platinum Contributor
Member For 5 Years
inganeer

inganeer

Gold Contributor
Member For 5 Years
dubya314 said:
I got a glass section for the Wine that i was unable to find anywhere, and otherwise rendered the tank useless from @inganeer today. Thanks again my friend

Edit: hey, site was down for me all day, now i gots no moji's??????
Click to expand...
I was wondering if it was ever going to get there. I think I have 2 more in my other box of spares if you need another.

Sent from my LGL722DL using Tapatalk
 
dubya314

dubya314

Platinum Contributor
Member For 5 Years
inganeer said:
I was wondering if it was ever going to get there. I think I have 2 more in my other box of spares if you need another.

Sent from my LGL722DL using Tapatalk
Click to expand...
I busted the other one overtighening, so hopefully I learned my lesson on that, lol.
Still working on the other boro, but got yours all ready to go when that gets finalized. If not by Monday, I will just go send yours.
 
You must log in or register to reply here.

VU Sponsors

Top