Become a Patron!

evic vtc mini

  1. W

    Evic VTC mini pixel line issue

    Hey. I just bougth an Evic VTC mini and justr after turning it on this line (photo) showed up. What could it be a hardware or software probelm ? I had like 3 of these mods in my hands and there was no problems with them.
  2. K

    Help! Out of options!

    I have been using my Evic VTC Mini for 9 months now and have never had any issues up until this point. I have always used nickel coils but only had titanium left on hand so that is what I have in there now. Since I put in and primed my new coil it no longer allows me to use the temp control. I...
  3. J

    (Evic Vtc mini Firmware problem)Can't connect my EVIC VTC Mini to my PC

    Hello guys im new to this and this is my first post. I've been searching for this type of problem but didn't find anything. So yesterday i got my Evic VTC mini (its my first vape btw), and i was pretty good. So when i got it home and I saw in google that there was a update for the firmware. But...
  4. S

    New to RDA builds, does my mod support them?

    Hello im new here and i'd appreciate some insight on this.. I have a evic vtc mini and just got a kanger dota rdta. The mod goes up to 75w but im not sure what type of coil is recommended for this setup or how much ohmns should i be building to get a nice flavor? Thanks in advance
  5. M

    Looking for the best/smallest single 18650 mod

    Hi fellow vapers! So I just started vaping about 3 months ago and I purchased the Smok Stick Plus Kit. I enjoy the kit and it has been good to me but I am looking for something more now. I love how small my vape pen is so I want a small mod that can hold a single 18650. I will be vaping around...
  6. D

    I don't understand the settings on the e-Vic VTC Mini

    I have had the e-Vic VTC Mini for quite some time but keep putting it in the cabinet and going back to my eGo One because I cannot get the settings right on the e-Vic Mini. I am tech-tarded and have very little knowledge about the modern e-cigs even though I have been vaping for 4 years. I am...
  7. iki

    Evic vtc mini vs Cool Fire IV Plus

    Wich one is the best for a starter kit? The evic with the cubis And the cool fire with the isub G tank
  8. iki

    Cuboid vs evic vtc mini

    so wich is the best? Baterry life. Size. Performance.
  9. iki

    Kangertech Genitank MEGA

    I've got the genitank mega and its terrible with my ego one battery. It has 1.2 coils, and it just sucks, my question is, if i buy the evic vtc mini, will it perform better? Or another mod?
  10. iki

    Evic vtc min charge via USB

    Can i charge the evic vtc mimi via usb? with the battery on.
  11. iki

    Evic vtc mini with the gemini vaporesso

    So I'm gonna buy the evic vtc mini, and the gemini vaporesso. Been told it's a good combination. What u guys think?
  12. iki

    New vaper saying hi

    Hey everyone, I've been smoking for nine years straight, one pack a day, last week i got my hands on my first Goog e-cig, the eGo ONE 2200! I bought two of those, one stainless steel and one in black. But i got to say its not that great. So I'm gonna buy a evic vtc mini with the gemini...
  13. skt239

    TC Pre-set Question

    Hello all, I had a question about TC settings that come pre-programmed on mods like the RX200, Evic, or any mod with a TC pre-set. Does the mod just use a TCR value in the setting or is it done some other way? I ask because on my RX and Evic the vape using the TCR setting for SS is very weak...
  14. M

    evic vtc mini battery

    Hi everyone I'm a bit new to vaping and I love it but I have an evic vtc mini with a cubis tank running an ni200 coil at 0.24ohms 26watts in variable temp mode and the standard battery is pooh I've seen a LGMJ1 3500MAH 10amp/20amp 18650 but I need to know if this will be safe enough for my evic...
  15. culvre

    SS 316L TCR values on Evic VTC mini?

    I'm going to be getting some SS 316L wire for my Bellus RTA soon. So first off, will that work in the SS316 mode on the Evic mini? If so, it would negate the second question I have... Second, if it won't work, how do I set the TCR values in the mod so it will work? I'm sick of the delicate...
  16. V

    Kangertech Subtank SS316L coils

    Does anyone know where I can find the (pink) kangertech ssocc SS316L coils that are made with SS wiring? I am trying to use the SS316 Temperature Control setting on my Evic VTC and cannot find these coils anywhere. I do not like the Nickel ones and all the other ones are either nichrome or clapton.
  17. vapingproduct

    Joyetech Evic VTC Mini With Cubis Kit In Stock Now!

    Now we have received the first stock for Joyetech Evic VTC MiniIt With Cubis Kit with free shipping. this is one of the best starter kits in the market and all orders will be sent out in 24 hours. ,It has fashionable Temp-SS316 and cystomized TCR avaible .The power of The CUBIS kit is...
  18. tljenson

    Evic Mini VTC or Vape Forward Lite?

    I've got a Cuboid, a Smok RX200 and an old Kanger Tech Sub Mini. I'm wanting to get an updated single 18650 mod with stainless steel temp control. I'm torn between the vtc mini and the vape forward lite. I'm leaning towards the lite, because I think it's more solid, and the build quality looks a...
  19. tr1age

    Evic VTC Mini Starter Kit Giveaway! - 2/28

    Details in the video: http://vapingunderground.com/threads/evic-vtc-mini-the-most-visible-device-for-new-vapers-but-is-it-worth-it-giveaway.199795/ P.S. This does require a YouTube account.
  20. tr1age

    Evic VTC Mini - The most visible device for new Vapers, but is it worth it? + GIVEAWAY!

    So we wanted to know why the Evic VTC Mini Starter Kit was the most pitched or visible sub tank mod on the market. I think we figured it out! This is aimed more for the beginning Vaper. No one wants to hassle with something when they are trying to switch from something familiar to something...
  21. skt239

    VTC Mini Not Hitting Temp in SS

    Hello all, I think l might have a issue with my Evic VTC mini in SS temp control. It seems that it never hits the temp I set it for. I have it set between 450-480 and as I watch the screen while vaping it, the temp will fluctuate right below what I have it set for. No matter how high I set my...
  22. skt239

    In Praise of the Ego One Mega (yeah that's right)

    Last year, I got my first Evic VTC mini, it was then and still is one of my favorite mods. When I first got it, I immediately slapped my freemax Starre on top and was happy as can be. A couple weeks later I was reading about Ti wire and really wanted to try it. At that point I remembered my ego...
  23. ThcHemplar

    (Newbie) Rx200 or eVic Mini, orr the Cuboid 150-200w

    So I'm trying to upgrade from an Ijust2, currently my only mod. But in my search I came across 2 very different mods for relatively the same price (depending on the vendor). The Wismec Reuleaux Rx200 and the eVic vtc mini 75w. I've heard good reviews on both, however do I really need 200w and 3x...
  24. Pauuuuula

    Vaping Essentials? Newbie

    Hi, newbie here! I am going to list a few that I am about to purchase online in Malaysia (I am from PH, btw) I want to know if it is really needed and want to know your suggestions on what I still need. 1. Evic VTC mini mod 2. Billow V2 RTA 3. Lg HG2 batt 4. NiteCore i2 charger Add-ons (for...
  25. tomasaki

    About variable mods and amps.

    Hey guys! I'm fairly new to vaping, i have an Evic Vtc Mini mod and a clone Velocity Mini. I'm using samsung batteries (smurf and grinch). I'm vaping a dual clapton coil on my velocity mini, reading 0.20 ohms and 13.0-13.5 amps on 36watts on my Evic. I have 3 questions: 1) I read that smurfs...

VU Sponsors

Top