ohm

Hello guys im new to this forum cuz i was banned on other vaping forum so hopefully i can be happy here and get all the infos i need. So first im looking to buy the vandy vape trident kit since its regulated and look like a mechanical mod and its waterproof but i want to know if i can use an rda...

Uwell Evdilo 200W 18650/20700/21700 TC VW Variable Wattage Box Mod Features Material: Zinc Alloy + PC + Stainless Steel Battery Type: Dual 18650 / 20700 / 21700 Batteries (Not included) Power Range: 5~200W Resistance Range: 0.1~3ohm (VW) / 0.1~1ohm (TC) Temperature Range: 200~600'F / 100~315'C...

Piper Style 18350 Hybrid Mechanical Mod 22mm Features Hybrid connection; Compatiable with single 18350 battery Vazzling Takeover Mini 18350 Style Hybrid Mechanical Mod 25mm w/Logo Features 510 threading connection Construction from brass 25mm diameter Powered by 1 x 18350 battery (not...

Hellbeast 0.2 ohm coil, but reads 0.16 ohms in my mod Drop rda is the two coil atomizer, reads 0.11 ohms

I have a wismec Machina and a wismec luxotic nc, now they both came with 2 .28 caption coils I installed it on the Machina and it worked fine, I bought a bunch if different coils pre-made cause I'm not into building just yet. so I have installed .45 twisted coils in it and it hits like shit...

Hello. im thinking about buying an ijoy capo squonker kit, with a 21700 or 20700 battery. what ohm should i have on the coils for best clouds?

So i have a50w eleaf istick. With a sapor drip on it. i rebuilt the coil and it came out to 0.5 ohm on the new coils. i looked at some calculators and they are all telling me to run it at about 14.5 W. I was just curious if this was safe/if it would even vape well. mainly just trying to avoid it...

I have a smok x priv with the prince rba. The coils I put on are running at .12 ohm. Are Samsung 25r batteries safe at that ohm?

Hello, I am new to vaping and I am unsure which tanks are compatible with which box mods. I was wondering if it's alright to pair the innokin itaste mvp4 with the iclear 30s tank? Also, how many watts would you reccomend running it at with a 1.5 ohm coil? Thanks,

Hi, as I am learning extensively and diligently about safety, ohm's law, battery quality and performance, coil building, resistance, battery's amp discharge rate (from the famous Mooch), and the whole realm of unregulated mod safety rules... I have a good understanding on the minimum ohm that...

hello! Im currently using the VGOD pro mech with dead rabbit, and im on .2Ohm on some tiger wires 26G 5wraps around a 2,5mm drill, however, it doesnt get hot as fast as id like, my question is if there is A better wire to use without changing to lower than .2 , and if so which wire(s), i prefer...

I have Fuchai 213 with Tvf8 big smoke tank. Ive been building my coil using premade coils, so I just install the two coils and put the cotton. I decided to build my coil but I do not know which wire can help to get what I am looking for. I found 0.4-0.5ohm is the best smoke and test ( I havent...

So i'm fairly new to mech mods but I've done my research. So i have a Vgod pro mech with a vgod elite rda. I'm running a build which reads at .18 ohms. I'm just wondering if i'm safe running my sony vtc4 batteries with no problems. they are 30 amp continuous so i'm assuming it's fine since that...

Hello, ive recently bought a VGOD pro mech with Lg hd2 25Amp battery, and i am wondering what the best Resistance i can build with to get good cloud production but still good flavor, and without damaging the battery.

okay so i have a Av Able copper mech mod with a HOHM life 18650 battery and i was woundering if it would be safe to run a pair of 3 core 4 wrapped 3mm 26-36g n80 alien coils at around 0.08 ohms? and the RDA im using is just the RDA that comes with the Av Able mech mod. on the HOHM Life Wrap...

So, I'm totally new to this and I have a question regarding ohm settings on a new mod I bought. Today I went to my local vape shop and bought a mod. Having been my first time ever vaping, the guy hooked me up with a Prism and the accessories, set it all up for me and walked me through the...

Just bought My first vape kit, a kangertech kit. The display says 0.23 ohms and i just Read that low ohms can be dangerous...how do i know if it's dangerous? i've already used it a couple of Times!

Hey guys I am looking to get a coil building kit and was seeing what you guys prefer- a simple basic kit with no ohm with just tweezers, jig, allen key? Or the one with pliers and ohm and all that? Picture 1 or 2? Thanks in advance

Hello I am new to Rdas, Can you please help. I want to safely use my therion 166 with twisted messes 24 rda. My minimum resistance is 0.15 in wattage mode. 0.08 in Temperature control mode. I have 2 kenthal/nichrome coils clocking in at 0.08ohm. I've been using this in Temperature control...

I have just gotten a starter kit Kangertech Subox Mini-C and put a Baby Beast tank on it. My wife's baby beast tank came with a higher ohm coil in it, but mine has a .15 ohm coil in it. Now, the mod specs say that the minimum resistance is .3 ohms. So, my question is, what might the consequences...

UPDATE: I seem to have fixed the problem Ive had my alien for about 6 months now. Always been a great mod. Used the baby beast it came with for a while and eventually bought a pharaoh rta. Have been building for a while and absolutely love building on this thing. A few days ago while I was...

i have a Joyetech eVic-VT (not mini) with the tank that comes with it. My atomizer is at 1.09 ohm

Whats up guys, i've had a lot of problems lately with ohms being too low on more complex builds, not sure where the problem.. The most recent was a build tonight, I have 2 pieces of claptoned 28g SS/32g Ni80, and one strand of fused clapton 26g SS/3g NI80 I then wound the three cores (4 pieces...

so i just started building my own coils a few weeks ago and went from a single coil rda to a dual coil rda, and was wondering if for example i usually run my fused clapton as a single at 50w should i be running 2 at 100w to get the same performance out of each coil or will it perform the same at...

Hi guys! Long time since i have had a question here Im thinking of buying the Wismec Reuleaux rx 300 and tfv12 atomizer. I currently have some 3.6V batteries I know how to apply new cotton and such, but how do i get a proper wire for my build? I want to use the dual coil or triple coil deck...

Hi there! I have an old Joyetech Ego One that I plan to give to a friend. Now, the question is. Does anyone know the Ohm range on that battery? It's the 2200Mah version and the tank that came with it (That's long gone) had two coils. One 1.0 Ohm and a 0.5 Ohm. I got a new tank that I tried on...

Hey Guys, I've been only getting 60mL's of juice through my SMOK Babybeast before i have to switch the coil. Running .15ohm coil at 70 watts usually. I changed the airflow and i'm getting a little bit more but I'd like to see what you guys think, put your answer in to this poll in the link below...

I have an ABS parallel mech box mod by Cigreen. I just got it & I'm new to mechs. I have an alliance V2+ Big Boy RAD that I normally run on my IVP3 at .27 ohm. I switched to the ABS but it takes at least 10 seconds to heat up but won't even make decentish clouds. I tried .5 Clapton. I tried...

I purchased a Kanger TopBox Mini Starter Kit for using when I'm out and about. My RX 2/3 is a bit bulky and my ego pens just aren't satisfying any more after going sub-ohm. The mod arrived faulty, it reads every coil at 0.31ohms. Tried different tanks and coils etc. and cleaning the 510...

Hey im about to buy a 0.5 sub ohm tank, and i have a Justfog normal battery, (sold with a 1.8 ohm clearomizer). What will happen if i use the 0.5 subohm tank on that battery? (edit) So what will happen if you connect a battery, which probably doesnt support sub ohm, to a sub ohm tank? battery...

I'm using an XCube II, but this question is applicable to all variable mods that have the ability to set coil resistance, be they voltage, wattage, or temp control. My mod rarely reads coils at their stated resistance (ohm) rating. They almost all come in a little over or under where the...

I have a Kanger Subox mini. The mod itself is great. However, the coils from Kangertech have sucked. For me at least. Almost immediately I get bad flavored hits. I always prime new coils. I make sure it's screwed in tight. However, every third hit is a burnt hit. Even when its a fresh...

i have a cuboid 200w box mod right now. I saw a panzer black hawk in my local store and fell in love with it. It's 39.99 (pretty sure it's a clone) but I still love the way it looks. I was just wondering if it'd be a good one to get. Also what 18650 battery should I use for it if I'm gonna have...

Hey im getting a vape & thinking about getting the joyetech evic vtc mini with a kanger toptank mini, anyways according to many reviews the joyetech eats battery in wattage mode due to puff counter etc, so im wanting to use it in TC mode but theres only titanium and nickel for tc mode options on...

I recently purchased a cherry bomber box mod (I know it can be dangerous) and i have a RDA that i can fit 3 coils on also I have 2 VCT 5 batterys in the cherry bomber giving me 60 amps. how many ohms do you recommend for a cherry bomber?. as at the moment its really burning my throat and im...

Hey guys! I'm still fairly new to the vaping world. Although im quite eductated on basics, s uch as juices, RDA's, mod types, etc. the advanced things are still confusing. However, that's not why I'm here. My best friend gave me his IPV Mini II box mod and another friend just gave me a Mad...

Hi! If you're reading this, thanks already! I have this aspire CF G Power Battery along with the K1 Glassomizer. I am currently using 1.6 ohm coils, what I wanna know is if I can go lower? Can I rebuild a coil which is say 1.0 ohm? Will it work with the G Power? What's the lowest I could go...

15% OFF ALL E LIQUID AT CHECKOUT WITH COUPON CODE: 15% FREE SHIPPING ON ORDERS OVER $50.00 WWW.EJUICEMAFIA.COM THIS SALE IS GOING ON UNTIL SUNDAY 11:59PM MST WE ARE A NEW SITE THAT IS TRYING TO EARN YOUR HONEST BUSINESS IF THERE IS ANY OTHER BRANDS THAT YOU LIKE US TO CARRY PLEASE LET US...

What is the best and safest battery that will heat up my coil faster. I'm using a vtc 4 on this .16 build but I feel the ramp up time is to slow. Any suggestions on better amp batteries.