Become a Patron!

"5.1 Now inactive"

Would you like to participate in PIF 5.0

  • Total voters
    73
Dr3d

Dr3d

Yes. What was the question?
VU Donator
Silver Contributor
Member For 4 Years
@anendeloflorien I need your address. @RZAwora & @Heather are waiting on you.

And, FWIW, we were all wrong about the third part packed in with the Acrylic Kanger Bellcaps. Got home late last night, but when I broke into the package I was ... well ... surfuck'nprised. It is an acrylic plug (o ring'd even) which replaces the wide bore drip tip for those that like sucking softballs through garden hoses. I can only imagine its purpose is to facilitate balance when the bell cap is set down upside down. Gotta rely on y'all to figure out why the heck they bothered o ring'g it though. Well, maybe it's to help hold a vacuum for folks that had problems with it leaking.

If you read all that ... assuming this bell cap works ... I'm going to dramatically increase my Kanger Subtank collection this week. Last night I wanted to order Joyetech Ego One CLR atomizer heads (rebuildable heads for the Ego One Mega Tank that comes with the Evic VT) and I had trouble finding them in stock at my usual suspect vendors. The shop I found them at also had: http://www.myvaporstore.com/Kanger-Airflow-Control-Base-Subtank-Mini-p/krst-ac20.htm so I ordered a couple. If you poke around, they also have other interesting kanger bits. I ordered a Subtank Plus base too so I may finally be able to use my Subtank OG on my 25mm Centipede. The OG had that freak'n goofy spring loaded positive pin that prevented using it in a hybrid setup. So, @RZAwora since you claimed 3 of the bell caps ... if they work, you can get another couple bases and expand your tank collection nicely. I will let y'all know how it goes later. I'm going to grab some polish 'cause all of mine is actually wax and I want my bell caps clear instead of frosted.
 
T

Taver13

Guest
dred said:
@anendeloflorien I need your address. @RZAwora & @Heather are waiting on you.

And, FWIW, we were all wrong about the third part packed in with the Acrylic Kanger Bellcaps. Got home late last night, but when I broke into the package I was ... well ... surfuck'nprised. It is an acrylic plug (o ring'd even) which replaces the wide bore drip tip for those that like sucking softballs through garden hoses. I can only imagine its purpose is to facilitate balance when the bell cap is set down upside down. Gotta rely on y'all to figure out why the heck they bothered o ring'g it though. Well, maybe it's to help hold a vacuum for folks that had problems with it leaking.

If you read all that ... assuming this bell cap works ... I'm going to dramatically increase my Kanger Subtank collection this week. Last night I wanted to order Joyetech Ego One CLR atomizer heads (rebuildable heads for the Ego One Mega Tank that comes with the Evic VT) and I had trouble finding them in stock at my usual suspect vendors. The shop I found them at also had: http://www.myvaporstore.com/Kanger-Airflow-Control-Base-Subtank-Mini-p/krst-ac20.htm so I ordered a couple. If you poke around, they also have other interesting kanger bits. I ordered a Subtank Plus base too so I may finally be able to use my Subtank OG on my 25mm Centipede. The OG had that freak'n goofy spring loaded positive pin that prevented using it in a hybrid setup. So, @RZAwora since you claimed 3 of the bell caps ... if they work, you can get another couple bases and expand your tank collection nicely. I will let y'all know how it goes later. I'm going to grab some polish 'cause all of mine is actually wax and I want my bell caps clear instead of frosted.
Click to expand...
use stuff with a light compound in it, i use it and it becomes crystal clear. dont forget to do the inside as well cause thats frosted. then obvioiuly wash of the wax on the inside, unless you like vaping that sorta thing
 
T

Taver13

Guest
Cruel-Phate said:
Wait, whoah....I did not do anything, was Tav :p
Click to expand...
bus11.jpg
 
RZAwora

RZAwora

Silver Contributor
Member For 4 Years
dred said:
@anendeloflorien I need your address. @RZAwora & @Heather are waiting on you.

And, FWIW, we were all wrong about the third part packed in with the Acrylic Kanger Bellcaps. Got home late last night, but when I broke into the package I was ... well ... surfuck'nprised. It is an acrylic plug (o ring'd even) which replaces the wide bore drip tip for those that like sucking softballs through garden hoses. I can only imagine its purpose is to facilitate balance when the bell cap is set down upside down. Gotta rely on y'all to figure out why the heck they bothered o ring'g it though. Well, maybe it's to help hold a vacuum for folks that had problems with it leaking.

If you read all that ... assuming this bell cap works ... I'm going to dramatically increase my Kanger Subtank collection this week. Last night I wanted to order Joyetech Ego One CLR atomizer heads (rebuildable heads for the Ego One Mega Tank that comes with the Evic VT) and I had trouble finding them in stock at my usual suspect vendors. The shop I found them at also had: http://www.myvaporstore.com/Kanger-Airflow-Control-Base-Subtank-Mini-p/krst-ac20.htm so I ordered a couple. If you poke around, they also have other interesting kanger bits. I ordered a Subtank Plus base too so I may finally be able to use my Subtank OG on my 25mm Centipede. The OG had that freak'n goofy spring loaded positive pin that prevented using it in a hybrid setup. So, @RZAwora since you claimed 3 of the bell caps ... if they work, you can get another couple bases and expand your tank collection nicely. I will let y'all know how it goes later. I'm going to grab some polish 'cause all of mine is actually wax and I want my bell caps clear instead of frosted.
Click to expand...
Ah...I see what you're saying...order some bases, and some RBA kits, and I would then have 5 Kanger Subtank Mini's? That would be correct. I saw the bases on Fasttech, also the RBA's. However, Kanger released a v2 air-flow control base (two holes-one each side), and also a v2 RBA kit (holes in side like stock coils) for the Subtank Mini's. I'm going to try and find them...
 
RZAwora

RZAwora

Silver Contributor
Member For 4 Years
I'm thinking about just picking up one of these Innokin Cool Fire IV for $37.95 and not worry about finding an IPV Mini. They're pretty similar, with the Innokin going up to 40w. The only major difference is the Innokin has a built-in battery, but I think I'm fine with that. The Innokin is quite a bit smaller than the IPV Mini as well. Decision, decisions... It also says this...
The Coolfire IV uses Vrms DC current and is very accurate with a power deviation of 0.1Watt. The full 40 Watts is precisely maintained between resistances of 0.3 to 2.5 Ohms. There is no wasted power and exact accuracy means you are always vaping the power level that you choose. Vrms provides superior precision in delivering the exact wattage Ohm's Law requires and stable power means better vapor.
Click to expand...
What's the difference between this Vrms and what ever else other mods use? Anything? What do you all think of this device, sound decent?
 
T

Taver13

Guest
RZAwora said:
I'm thinking about just picking up one of these Innokin Cool Fire IV for $37.95 and not worry about finding an IPV Mini. They're pretty similar, with the Innokin going up to 40w. The only major difference is the Innokin has a built-in battery, but I think I'm fine with that. The Innokin is quite a bit smaller than the IPV Mini as well. Decision, decisions... It also says this...

What's the difference between this Vrms and what ever else other mods use? Anything? What do you all think of this device, sound decent?
Click to expand...
the ipv uses dc to dc as well vrms is a form of modulation that controls the wattage by pulsing wave instead of a straight dc signal. any typ of modulation is harsh on coils and not as smooth of a vape
 
T

Taver13

Guest
on the ipv mini v1 you can choose between pulse width modulation and dc to dc depending on your vape style. with pwm, you can "step down" below battery voltage for those people that like to sub ohm at low watts, with dc to dc, the lowest you can go is the batteries voltage, anything the screen says after that isnt what you are getting, your getting whatever your battery voltage is, though some of the higher wattage devices can step down voltage dc-dc, like the sig 150
 
Heather

Heather

Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Taver13 said:
on the ipv mini v1 you can choose between pulse width modulation and dc to dc depending on your vape style. with pwm, you can "step down" below battery voltage for those people that like to sub ohm at low watts, with dc to dc, the lowest you can go is the batteries voltage, anything the screen says after that isnt what you are getting, your getting whatever your battery voltage is, though some of the higher wattage devices can step down voltage dc-dc, like the sig 150
Click to expand...
Good explanation. I have wondered this too. Some devices are really great some really harsh. This is the reason. Lighty explained it to me the other day. RZAwora are you interested in a siegelie mini at all? 30 watts, blue. I have only used it about a month maybe 2.
 
RZAwora

RZAwora

Silver Contributor
Member For 4 Years
Taver13 said:
i

dont think you will be dissapointed with a sig 30, sig makes a solid device and the vape quality is fantastic
Click to expand...
Sigelei Legend was one of my first VV/VW devices, I was happy with that, and the quality was great. I've never heard much bad about their devices. I didn't even realize they had a 30w mini device.
 
Heather

Heather

Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
The siegelie is great I just bought the HANA mini in the hardware section so could part with it. I actually had just bought the IPV then saw the HANA with a price I couldn't pass on. I am wishing I didn't buy the IPV but I doubt you want a pink mod. Or maybe you do?
 
Dr3d

Dr3d

Yes. What was the question?
VU Donator
Silver Contributor
Member For 4 Years
Donald Bickers said:
got some vapemail from dred,,,,,,,only problem is im not sure what it fits,time to do some research
v0MAa95.jpg
Click to expand...

Unfucking believable ... this means @Taver13 is about to receive a Billow V1 ... sent'm at the same time ... musta slapped the addresses on the wrong boxes. Anyway @Donald Bickers, that is a short shit kit for a Billow V1. Here's hoping @Taver13 doesn't get fingerprint cards that were Arizona bound ... facepalm.

Anyway ... at least the two packages that went out today for @anendeloflorien & @Heather had identical contents. USPS tracking for these is 9114 9012 3080 3055 9272 78 & 9114 9012 3080 3055 9272 54.
 
Dr3d

Dr3d

Yes. What was the question?
VU Donator
Silver Contributor
Member For 4 Years
So ... polished up one of the bell caps ... took nearly a minute.

ImageUploadedByTapatalk1433196653.144274.jpg

And, as evidenced by the photo above, I have a new use for the chimney seal (note, it now has a name even) included with the bell cap. I did not use it to fill that tank, and filling to top of chimney seems to have inserted just enough juice to piss me off. I am hoping that I can cap the chimney and allow me to fill closer to full.

I'd say: much more fun than a parts list plus instructions could have been.
 
Dr3d

Dr3d

Yes. What was the question?
VU Donator
Silver Contributor
Member For 4 Years
@Taver13 & @Donald Bickers ... I swear my pooch was not harm'd by this ef'g. Leastwise the fingerprints were left out of that clusteref'n so that little project won't get delayed.

@RZAwora ... I still need your address - seems you left one small detail out of the message when you sent it. Good thing though ... you saved the other two from getting a fistful of bell caps instead of just one. Seems shipping is not one of my strong suits.
 
T

Taver13

Guest
dred said:
@Taver13 & @Donald Bickers ... I swear my pooch was not harm'd by this ef'g. Leastwise the fingerprints were left out of that clusteref'n so that little project won't get delayed.

@RZAwora ... I still need your address - seems you left one small detail out of the message when you sent it. Good thing though ... you saved the other two from getting a fistful of bell caps instead of just one. Seems shipping is not one of my strong suits.
Click to expand...
im not sure i want a fingerprint explination
 
Dr3d

Dr3d

Yes. What was the question?
VU Donator
Silver Contributor
Member For 4 Years
Taver13 said:
im not sure i want a fingerprint explination
Click to expand...

I just pleaded to reckless driving on the case resulting from my 2013 motorcycle smashing. It was not supposed to impact my Texas carry permit 'cause it is not a class A or B misdemeanor. However, it is unclassified and I've learned Texas classifies it against my favor as far as concealed carry goes. My Texas CHL is now in the penalty box for 5 years.

Arizona has no problem with providing me a carry permit which Texas happens to honor. They needed fingerprint cards and I should be good to carry again before the end of summer.

I'm actually thinking about starting a small permit collection. VA is next on my list 'cause the non resident AZ permit is only valid in 29 states. Several states take issue with non resident permits. Prolly 'cause asshats like me can use them to stay safe and secure.
 
T

Taver13

Guest
hey everybody! my life is awesome! after finally getting the douchebags at the water district over to my other house to replace the busted meter, i got over there today to turn the water on. apparently there was still some residual water that did not drain. and guess what? im sure you know where this is going! YES! YOU ARE CORRECT! A pipe burst! and where you may ask? behind all the brand new sheetrock that i just replaced after Sandy! Score another point for Murphy! That guy is a fucking winner for sure!
 
Dr3d

Dr3d

Yes. What was the question?
VU Donator
Silver Contributor
Member For 4 Years
Taver13 said:
hey everybody! my life is awesome! after finally getting the douchebags at the water district over to my other house to replace the busted meter, i got over there today to turn the water on. apparently there was still some residual water that did not drain. and guess what? im sure you know where this is going! YES! YOU ARE CORRECT! A pipe burst! and where you may ask? behind all the brand new sheetrock that i just replaced after Sandy! Score another point for Murphy! That guy is a fucking winner for sure!
Click to expand...

Wow. You sir are clearly a singularly badass'd mofo. I know this 'cause my mother taught me of such challenges and also of those selected to overcome their arrivals. She was right when she fortold the arrival of challenge. As was she regarding the existence of strength of will and character which meet said challenges.

I sometimes wonder why she did not fortell the magnitude of "sucks" one feels when tapped to answer said challenges.

Another wise man, Henley, did however provide a fair template with which one can meet such challenges. He named his template Invictus. Its recitation sometimes aids my resolution when I've been shit upon by unwanted challenges.
 
T

Taver13

Guest
dred said:
Wow. You sir are clearly a singularly badass'd mofo. I know this 'cause my mother taught me of such challenges and also of those selected to overcome their arrivals. She was right when she fortold the arrival of challenge. As was she regarding the existence of strength of will and character which meet said challenges.

I sometimes wonder why she did not fortell the magnitude of "sucks" one feels when tapped to answer said challenges.

Another wise man, Henley, did however provide a fair template with which one can meet such challenges. He named his template Invictus. Its recitation sometimes aids my resolution when I've been shit upon by unwanted challenges.
Click to expand...
honestly man, im just used to it at this point. no point in dwelling on it, just figure out a solution and move on from there. i have so much other shit going on right now, that in reality, its the least of my worries. so as i said, find a solution and move on. your mother, is a very wise woman
 
T

Taver13

Guest
@dred the billow, IMO does have some of the best flavor out there for a RTA, im kinda excited to see how much better it is in drop mode, maybe just a touch bigger airhole, nothing crazy
 
BenJammin

BenJammin

Gold Contributor
Member For 4 Years
So this skittles juice I've been vaping for 24 hours and then some not only has great flavor, but both the cotton and coils still look new... that is awesome! That vapor lock had to be rewicked once a day and prolly could stand to be rewicked twice daily... so hopefully this last 15ml or so of skittles will last me til the BD box gets here hopefully Wednesday :)
 
Heather

Heather

Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
BenJammin said:
So this skittles juice I've been vaping for 24 hours and then some not only has great flavor, but both the cotton and coils still look new... that is awesome! That vapor lock had to be rewicked once a day and prolly could stand to be rewicked twice daily... so hopefully this last 15ml or so of skittles will last me til the BD box gets here hopefully Wednesday :)
Click to expand...
There is a skittles flavor. It may just be that flavor standalone.
 
Cruel-Phate

Cruel-Phate

Just Thomas
VU Donator
Gold Contributor
Member For 4 Years
MOMABEAR said:
You know you can't keep this gabby bunch quiet... I think I should go check out that corner cuz there are a few that seem to enjoy going to it lol


Sent from my Momabear headquarters...
Click to expand...

They were not raised right! That's all I was saying, "they always want to be in the corner..."what are they doing in that corner that's so enjoyable! :eek::eek:
 
You must log in or register to reply here.

VU Sponsors

Top