Just my luck, they seem to be out of stock on the 7’s and 8’s lol
Become a Patron!
Armageddon Mfg. Squonk
- Thread starter Don29palms
- Start date
Just my luck, they seem to be out of stock on the 7’s and 8’s lol
That sucks. Have a look around, Google prebuilt coils. You should be able to find something. Good luck!
Thanks for your help
No problem!
Alien coils are always more expensive, but these are on sale and are really good. .41 single or .2 in dual. Have a look around their site maybe?
https://www.advancedvapesupply.com/...en-coils-n80-28gx3-36g?variant=15119048376355
Also Kanthal coils will have a higher resistance than N80 or SS so maybe keep an eye out for that material
Series are good as they add to the resistance. How many do you get for that price?I have these one the way here already. What’s your thoughts on these?
Edit: Just saw 3 sets.
3 sets for $45.99
Also consider getting a few of these batteries so that you won’t be restricted to higher ohms if you wish.
https://liionwholesale.com/products...ributor-inr-18650-p26a?variant=16132682154078
Vape Fan
_evil twin_
Staff member
Senior Moderator
VU Donator
Platinum Contributor
Press Corps
Member For 5 Years
https://www.steam-engine.org/ohm
Also see Mooch's recommended/tested for batteries and what he says their actual rating is.
https://www.e-cigarette-forum.com/attachments/7ed512cf-19d9-47e5-90c1-1048c4dd9bac-jpeg.847957/
Personally, for headroom I'd go ahead and get 30A Samsung 20S, 25A Molicel P26A with a little more runtime, or
Last edited:
I'll bet those would be a great vape. Again, you're going to want to make sure you're not below that .2 - .25ohm range in dual.
I'd seriously consider picking up a couple of higher amp batteries. I use Sony VTC5A/D or Samsung 20S in my mechs. You just open up what you can use for builds.
Here's battery Mooch's recommendation for mechs.
Vape Fan
_evil twin_
Staff member
Senior Moderator
VU Donator
Platinum Contributor
Press Corps
Member For 5 Years
Sorry, I seen it before I posted, but I already had it worked up and ready to go.@Vape Fan I just recommended the Molicel P26A’s & Mooch lol!
I was trying to find Zephur is it? Meg's coil thread for coils for GeNomez
Have fun and stay safe
And I was busy searching my bookmarks for Mooch's chart while y'all beat me to it
No need for sorrySorry, I seen it before I posted, but I already had it worked up and ready to go.
I was trying to find Zephur is it? Meg's coil thread for coils for GeNomez
we were both on it edit: we were all on it @Theboss
Vape Fan
_evil twin_
Staff member
Senior Moderator
VU Donator
Platinum Contributor
Press Corps
Member For 5 Years
@GeNomeZ PM her or reply to her thread. Maybe let her know what RDA and what battery and she can build to suit if she doesn't already have it.
http://vapingunderground.com/threads/zephyrs-coils.418550/
Learn ohm's law.... and wire wizard helps a lot.
http://vapingunderground.com/threads/zephyrs-coils.418550/
Learn ohm's law.... and wire wizard helps a lot.
Will do!
Please let us know what happens.
Mine came today and same thing happened. My wife picked it up and they asked for ID.
. i'm going to drink beers now 
I can only join the chorus of my friends in saying that, especially when it comes to mechanical unregulated devices, you do not want to fool around when it comes to your batteries. Nothing else to add as you have great advice already
Got mine today.I wasn't sure how i would like the mod being plastic,so i only bought one,and a spare door i was planning to sand down to use on my little Orca.After having the mod in hand,i think i'm gonna grab a white one now and use that spare door for it.
Today I got my black with green door Armageddon squonker, spare door and Redemption RDA. I will send the door down and fit it this weekend. I was going to wait to play with it but NO! I threw in a pair of .17ohm rectangle wire coils in the Redemption, filled the bottle with some Rootbeer Float ejuice and threw in a freshly charged 25R battery. No suprise on the Redemption. I have many Apocalypse RDAs and a couple Reckoning RDAs. The Redemption functions the same which is great. The mod is exactly what I expected from Armageddon. It's a well built little lightweight squonk box. I'm glad I picked it up and for the price it really can't be beat. I must say I'm sorry to see Florida Vapor supply closing their doors. Who knows what the future may bring.
Vape Fan
_evil twin_
Staff member
Senior Moderator
VU Donator
Platinum Contributor
Press Corps
Member For 5 Years
Armaggedon will still be in business. They're just closing the doors on the FVS side.
wildgypsy70
“Widgy Pidgy”
Staff member
Senior Moderator
VU Donator
Platinum Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
Me! Black body with frosted panel.
That's how mine came too,then i sanded the stab wood door to fit and put it on,but i was surprised the frosted door actually looks really good on there too.
Did you also get a matching button with your door?
Yeah,both wood doors came with matching buttons.I haven't installed the button though because i can't figure out how to get that retainer out that holds the contact in,that thing is in there good haha.
just poke it with something shaarp and lift up. its not in there hard.
i have a white flosted door. i am going to try polishing it clear tonight. these would be cool with a clear door. stay tuned
Nice! What are you going to polish it with?
Maybe i wasn't trying hard enough then haha.I tried to get it with a flat head screwdriver,tried getting under it and pressing into it while trying to move it up,but then again i also didn't want to break anything so maybe i didn't have enough pressure on it.
That’s looks really nice! What was left on the table?
A Magnet?
thanx
. never heard "there is something left on the table" ? it means = could have done more, there is more to be had, didn't do it 100%, could have gone further.its looks real good in the pic, even better in hand. but if i hold the door up to the light, i can see small imperfections.
it took me almost 3 hours, on & off, get to that. at first i thought the frost was through and though. but i sanded my pecker off, then buffed a lot. then, i started to see it was indeed clear. then another hour of buffing.
Sorry to hear about your pec....oh never mind.thanx
its looks real good in the pic, even better in hand. but if i hold the door up to the light, i can see small imperfections.
it took me almost 3 hours, on & off, get to that. at first i thought the frost was through and though. but i sanded my pecker off, then buffed a lot. then, i started to see it was indeed clear. then another hour of buffing.
thanx. i'l prolly find it at the flee market.
That looks nice
I'm getting ready to order a white one,it's hard to tell in their pics,is the white glossy like the black ones or is it like a matte finish?Love my Armageddons
My favorite is the V3 and in all honesty the only difference I can see is that it will accept a 20650 battery.
3000mAh 30amp
Sent from a Galaxy far far away!
Got mine today
I picked mine up from the P.O. since i was going that way anyway.
Had to sign for mine
Had to sign for mine
Or a smooth matte? It's tough to describe, very pleasant to hold. You can see it reflecting a light in my pic but it's tough to call it a gloss finish.
WOW! Very nice. Xmas gifts?