Become a Patron!

Post your builds

blakemorder

Silver Contributor
Member For 4 Years
I usually wipe off the excess with a napkin but I try not to rub it all off..I wish they used some kind of clear ceramic glaze or something on it....I mean I guess I could do it myself..
I get it all off with alcohol lol. If you come up with anything to keep the finish let me know, I might just buff the damn thing with mother's mag polish at this rate


Sent from my XT1095 using Tapatalk
 

Boattlebot

Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
What
I doubt anyone has gotten one yet...Ill do one when it comes in.


Ive wanted a Ruby for a long ass time...its a 3 post and its a Tube so build between .15-.3 and use GOOD BATTERIES ONLY!! Its a real hybrid setup.

So I followed your advice DED420 and the moment I added those tags people like Squidoode and a ton of other people have seen them...what a world of difference!
View attachment 46134


This is what I just did in the Office...I havent coiled it but its a beast. Its a 24N80/22KA1/24N80 Core wrapped in 40KD then Caged with 2 Different Claptons and Twisted Wires and 2 Single 22KA1 Strands..
2013fc3516aa778d515af08398a481c5.png
View attachment 46135

and Im not sure if I wanted to install this yet either:
3e7df0b9f7447bda374df8f6f184bedc.png
what hashtags are you supposed to use?
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
What

what hashtags are you supposed to use?
I wasnt using any...I edit all the posts with a variety of hashtags and in less then a hour I collected over 200 likes over all and 15+ followers..hashtags make the difference.

These are the tags I used
#anarchistbuilds #teamtwistedmesses #coil #coilporn #coil_architects #coilarchitect #coilartisan #coilart #vapeporn #vape#vapecommunity #vapefam #vapefamily #cleanbuildz #claptoncoil #subohmclub#twistedmesses #nice__builds #nauticallyfe #nicebuilds #wireporn #crazybuilds#coilbuilds #coilbuilders #buildlyfe #sexybuilds #vapepornbuild #probuilder#masterbuilder #crazybuilds #vapepornbuild #vapefam
 

Boattlebot

Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
I added
I wasnt using any...I edit all the posts with a variety of hashtags and in less then a hour I collected over 200 likes over all and 15+ followers..hashtags make the difference.

These are the tags I used
#anarchistbuilds #teamtwistedmesses #coil #coilporn #coil_architects #coilarchitect #coilartisan #coilart #vapeporn #vape#vapecommunity #vapefam #vapefamily #cleanbuildz #claptoncoil #subohmclub#twistedmesses #nice__builds #nauticallyfe #nicebuilds #wireporn #crazybuilds#coilbuilds #coilbuilders #buildlyfe #sexybuilds #vapepornbuild #probuilder#masterbuilder #crazybuilds #vapepornbuild #vapefam
i added that list to my latest builds pics. Wonder what will happen
 

Poppa (K)

Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
hashtags make all the world of difference on IG.
 

Boattlebot

Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Ok. I need a new rda with absolutky gigantic post holes.... i want a goon so bad but im afraid to drop big money on it after hearing some complaints about the clamping bars
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
Ok. I need a new rda with absolutky gigantic post holes.... i want a goon so bad but im afraid to drop big money on it after hearing some complaints about the clamping bars
Buy the Clone...or a Twisted Messes Squared...I actually like the TM Squared more then the Goon but I like the Goons AFC more...
 

Boattlebot

Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Ill have to bring a wire sample with me to the vape shop one day. They got twisted messes and petri v2s
 

EndDetour

Bronze Contributor
Member For 4 Years
None what so ever...how did it short inside?? Do you have a pic of your internals? Was yours a clone...I wonder if your internals are slightly different. I had mine apart earlier to clean it and I dont remember anything that could even cause a short...

Ohh you had it in Parallel...I have not done that yet...I keep it in Series and use the Snip and Exodus for Parallel. That makes me not even want to try it in Parallel...
Im glad your okay, that seriously sucks..
You bought it off Ebay?
It's a clone. I had it in series when it shorted. I had little to no interest using it in parallel. The curved piece of sheet metal that connects to the copper 510 fixture with the knurled nut caused the short. The nut came loose and the metal completed the circuit without the help of the trigger.


-every animal has an adequate amount of gray matter in its cranium to tan and preserve its own hide-
 

RedheadedBStarD

Member For 3 Years
Member For 2 Years
Member For 1 Year
Twisted clapton braidiator. Twisted 28g N80 wrapped in 36g N80 and braided with 30g K1. 3/32 ID and measures 0.32 ohms. I need to start braiding only when I'm home alone. Stopping and starting again always fucks it up.

yvNoLXM.jpgl

zeyYnyj.jpgl

VbqjnNf.jpgl

xcafPvT.jpgl


Had some left over twisted clapton from that and threw it in the all day STM. 3/32 ID and measures 0.5 ohms. Wrap isn't as clean on this bit, but I'll live.

xW4carv.jpgl

9ERF1fq.jpgl
 

DED420

Silver Contributor
Member For 4 Years
These are the standard #HashTags for vaping stuff (most common):

#MechanicalMod #UnregulatedMod #RegulatedMod #Ejuice #Eliquid #VapeLife #VapeLyfe #Vapestagram #VapeCommunity #InstaVape #VapeDaily #CoilBuild #CoilPorn #RDA #Atty #SubOhm #SubOhmVaping

And then you add the couple that are pertaining to the picture (the particular mod, the juice company, the kind of build, etc):

Ex: #RX200 #Wismec #Jaybo #200W #Tobeco #Velocity #OHW #MuffinMan #OneHitWonder #Claptons #FusedClaptons #DualCoil #Kanthal #Nichrome

And you can take it a step further and actually tag the companies (which often times leads to reposts for juice companies). Doing this, you'll get at least 50+ likes per post, especially you coil architects @raymo2u @Poppa (K) @Boattlebot @RedheadedBStarD (I'm getting between 50-100, and I'm far from being a coil master like some of you guys)
 

CrazyChef

Custom Hand Crafted Coils - PureCoils.com
VU Vendor
VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
Doing this, You'll get at east 50+ likes per post,
50 may be pushing it for someone newer to IG, but it definitely helps. @dotbuilds has reposted a few of my posts. One of them has become the third most liked build pic out of 1100 posts on their page. People like posts that are shiny for some reason. At least when it comes to coil builds.
 

DED420

Silver Contributor
Member For 4 Years
50 may be pushing it for someone newer to IG, but it definitely helps.

Yeah, I suppose not right off the bat, but keep at it and it's pretty amazing how quickly a page can blow up. Your coils are masterpieces, it's no wonder they're so well liked lol :D
@raymo2u I saw you got a shoutout yesterday, good job bud :confetti:, I told you people were gonna like your stuff, especially all your nice, fancy, limited run mods :p
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
Yeah, I suppose not right off the bat, but keep at it and it's pretty amazing how quickly a page can blow up. Your coils are masterpieces, it's no wonder they're so well liked lol :D
@raymo2u I saw you got a shoutout yesterday, good job bud :confetti:, I told you people were gonna like your stuff, especially all your nice, fancy, limited run mods :p
Yea I was pretty surprised...shit I was just happy I had M.Terk and Squidoode liking the pics, didnt expect a repost of anything but it did! The last thing I posted was right before I went to bed and its already got 270 likes...Hashtags are working crazy. Is their a limit to how many you can add and anytime I try to add more to a previous post I keep; getting "Couldn't save edit" on some of the pics...

Thanks for the info...phone doesnt stop vibrating now lol

What was your IG name Raymo?
Raymo_2_u, The Exodus Box Mod is my Avatar on it.
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
It's a clone. I had it in series when it shorted. I had little to no interest using it in parallel. The curved piece of sheet metal that connects to the copper 510 fixture with the knurled nut caused the short. The nut came loose and the metal completed the circuit without the help of the trigger.


-every animal has an adequate amount of gray matter in its cranium to tan and preserve its own hide-
You will have to take a pic of the internals...Ill take one also so you and I can compare on whats different. From what I recall you dont use the bar when using it in series........only when in parallel.
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
That's awesome, dude! What's it a pic of?
Its that clip of the Inception Coils heating up, it blew up immediatly after posting it and has steadily been growing since....I may do more glow video's of crazy builds.
I think today is the day I will be doing that coil collection in the Mason 40mm...to see how many 20 wrap/3mm 24g Coils will fit inside of it.
 

DED420

Silver Contributor
Member For 4 Years
Is their a limit to how many you can add and anytime I try to add more to a previous post I keep; getting "Couldn't save edit" on some of the pics...

Yeah, there's a limit of 30, that's why it's hard to pick the ones that you wanna use, gotta make them count lol.


This is something I've noticed more and more recently. I'm OCD, so I always tag what's in the picture first, then decide on the commons I'm gonna use, but I've seen alot of people just tag anything (like tagging #goonRDA #TMrda #Petriv2 #tugboat, when it's a picture of an ejuice bottle and Kanger Subtank) and they get tons of likes still, so it's possible to just use the "top searched" hashtags if you really want likes, not my style but apparently it works
 

DED420

Silver Contributor
Member For 4 Years
Its that clip of the Inception Coils heating up, it blew up immediatly after posting it and has steadily been growing since....I may do more glow video's of crazy builds.
I think today is the day I will be doing that coil collection in the Mason 40mm...to see how many 20 wrap/3mm 24g Coils will fit inside of it.

There is actually a lack of good glowshot videos on Insta, and the ones that people do post are usually of shitty quality (video is blurry and out of focus), or it's just simple coils. Your fancy beefy coils and hybrid coils are gonna garner quite a bit of attention. There's a page IIRC (@rampemup) that posts nothing but glow shot vid shoutouts, you can check them out, they're about the best that Instagram has to offer, and I'm sure they'd repost yours if I tagged them in it :D
 

CrazyChef

Custom Hand Crafted Coils - PureCoils.com
VU Vendor
VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
That's weird. I'm only seeing 39. Check my IG and see if mine is off, too.
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
I just spent the least half hour making a Staggered Framed Staple....I FUCKING HATE when your Ribbon is too thick and folds....It sucks being out of .3/.4 Ribbon...Im stuck with .8 and I cant make much with it..
 

CrazyChef

Custom Hand Crafted Coils - PureCoils.com
VU Vendor
VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
Ouch!
I'm thinking about maybe trying 2 opposite ends of the spectrum today. A low resistance wide framed staple using 0.3 ribbon, and a high resistance alien using some type of high gauge wire.
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
I'm not too happy with the way the wide coil came out.
28x0.3 kanthal, 30g A1 frames, 44g A1 wrap. 3.5mm ID, 0.12Ω

View attachment 46285 View attachment 46286 View attachment 46287
At least you got yours to wrap...Mine went fine for the first millisecond then bent and took off a nice thin layer of skin...reminded me of a cucumber being cut..I bet if you used 38g it would of held it tighter and made it slightly more uniform when wrapping it...but it also has alot to do with how much tension is had as you are pulling it round.
So I will never buy .6 and wider Ribbon wire ever again and stick to .3 from now on...but I did make this really shitty looking Naked Ribbon Build using the .8 today..
10 x .8 Ribbon Staged with 22G
20160406_143901.jpg 20160406_144643.jpg

Staggered Framed Staple...
I know it will just fold and warp...so its just wire porn
14 x .8R/24N80/36N80
20160406_113426.jpg 20160406_113854.jpg

Also through this monster in the Goon:
Fused Clapton Dou Single Coil (.05 Ohms)
24N80/22KA1/24N80*40N80 Tri Corr Fused Clapton (4 Wraps/3mm ID)
Staged with 2 x 24N80/40N80 Fused Clapton (3 Wraps/3mm ID)

20160406_145149.jpg 20160406_145137.jpg
 

Attachments

  • 20160406_113412.jpg
    20160406_113412.jpg
    151.8 KB · Views: 21
Last edited:

itsmenotyou

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
This is what I just did in the Office...I havent coiled it but its a beast. Its a 24N80/22KA1/24N80 Core wrapped in 40KD then Caged with 2 Different Claptons and Twisted Wires and 2 Single 22KA1 Strands..
2013fc3516aa778d515af08398a481c5.png
View attachment 46135

and Im not sure if I wanted to install this yet either:
3e7df0b9f7447bda374df8f6f184bedc.png
So umm I love you man lol
how does that thang vape?

sent from a dumb operated smart phone
 

itsmenotyou

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
I think today is the day I will be doing that coil collection in the Mason 40mm...to see how many 20 wrap/3mm 24g Coils will fit inside of it.
I hope I didn't miss this! If it's already posted up sorry. I'll see it soon lol


sent from a dumb operated smart phone
 

VU Sponsors

Top