Become a Patron!
Post your builds
- Thread starter Vape_geek
- Start date
Of course..I like Staggertons in the Goon and G24 Seminole RDAs in particular on a Triple Parallel Box.
How much power for a 4 and 5 wrap, that's a lot of wire in that bitch.....
Sent from my Z981 using Tapatalk
I wouldnt use it on a regulated mod, for many boxes it would be at the mods limits just to power it. Most of the time the regulated mods are limited in wattage for what the resistances are for these types of coils, thats why many of us prefer mechs...the triple parallel mechs or bigger.
I'm interested in resistance on the builds you post..
Any chance that could be included in specs?
And you have to have a +20 Bay charger and 100s of batterys (or some reasonable number)
Screw You.
I'm From Texas.
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
I've been waiting for someone to make a regulated mod that worked with a capacitor to increase max amps
Sent from my SM-G935V using Tapatalk
That would just be a buck converter. Lots of wraps on one side of a choke (say 10) and few on the other (1) would decrease the voltage but increase the amperage. In this case by 10. A capacitor just stores power and lets it go in an instant, like a camera flash. Just a xeon bulb and a cap with a power source.
DNA and FSK chips can do good on low ohm builds. FSK has a 45a limit iirc.
Still, a good mech would be better for some builds. The problem is that real mechs are stupid expensive. Not clones, real ones with 200a rated switches. Fire 0.05ohm on a triple parallel clone...lol.
DNA and FSK chips can do good on low ohm builds. FSK has a 45a limit iirc.
Still, a good mech would be better for some builds. The problem is that real mechs are stupid expensive. Not clones, real ones with 200a rated switches. Fire 0.05ohm on a triple parallel clone...lol.
Finally got my crimper after three weeks. Hard as Fuck to stack!
Sent from my VIE-L29 using Tapatalk
I just barely bought a Crimper a few days ago.. jumped right into a build and had a really hard time time stacking them as well. Finally got them stacked and then my ribbon flipped when wrapping FML..
Shit happends, practice makes perfect
Picture? I have a Traxxas truck lying around here somewhere lol
Screw You.
I'm From Texas.
It would have to be. The tension would straighten it.
One of my all time favorite builds, but a total pain to build. Stacked 26g quad coils at 0.18 ohm.
Nichrome or kanthal?
I was looking for one on the internet and my wife saw it.. said they might have it at a Craft Store she goes to (Jo-Ans) and Wa-La,, she came home with this. It was in the Scrap Booking aisle.
Edit: it's called a paper crimper/corrugator
Shit happends, practice makes perfect
Ya.. I'm already back at it LoL!
That's what I figured. But with the shit he builds it wouldn't surprise me lol
Screw You.
I'm From Texas.
I found something similar on eBay. It's plastic and pink but it was dirt cheap. Think it works out to about a dollar. I'll try that first if it breaks I'll get down the craft shop
Thanks!!Some good stuff from this morning!
Specs: 10 x .3R N80/28TM316L/40TM316L unwrapped so far....
Interlocking Alien Framed Staple.
Specs: 10 x .3R N80/28TM316L/ 2 x 42TM316L 6 Wraps/3mm ID @ .09 Ohms
Screw You.
I'm From Texas.
Got irritated with the corrugated builds and busted out a pair of Framed Staples instead.
You've gotta use .3 and .4 Ribbon for most of these builds, .5 Ribbon and bigger is for framed staples and cat tracks!
Thanks. I think was using .4 or .5 when corrugating. I'll make sure to use .4 or lower next time, but I just really need more practice :/ Those frames above are .6 with 26 gauge and they were a breeze compared to messing with a corrugated Staple helix LOL!
Boring but nearly every coil I make nowadays looks pretty much exactly like this one
I like them.
I like them.
Tell coilart to send you a mage gta so I can decide to buy it lol
Screw You.
I'm From Texas.
I bought a Mage a while ago
The new one? The gta Z (Genesis tank) single coil version???I bought a Mage a while ago
I know you had it good.
Screw You.
I'm From Texas.
Not the GTA version, the original....Im not sure if Ill buy that one. Augvape has a new prototype RDTA they are sending my to check out....it looks very appealing!
I've been running a single coil in the old mutation mt for at work, so the gta is pretty appealing. I guess I don't use good retailers but I can't for the life of me find the merlin mini for sale besides ft. And the augvape site isn't very good
Screw You.
I'm From Texas.
Cool. I'm loving my limitless even though I think they could have been much better.
I hope they make something awesome.
My first complete DIY build
Twisted 3 strands 26 guage: 2 Kanthal, 1 Ni80
6 wraps, 3.0mm inside diameter
2 coils = .15ohm
Hits real nice between 85 - 115 watts. with 96% VG juice @ 115 on a Buddha RDA I get a nice warm, tasty cloud.
Wire:
Built:
Twisted 3 strands 26 guage: 2 Kanthal, 1 Ni80
6 wraps, 3.0mm inside diameter
2 coils = .15ohm
Hits real nice between 85 - 115 watts. with 96% VG juice @ 115 on a Buddha RDA I get a nice warm, tasty cloud.
Wire:
Built:
Does any one know if you can cut stacks of ribbon without messing it up?
I'm thinking tin snips might work.
Right now I'm just using small scissors to cut one piece at a time but I'd like to be able to trim an entire stack at once.
I'm thinking tin snips might work.
Right now I'm just using small scissors to cut one piece at a time but I'd like to be able to trim an entire stack at once.
Dont cheap out with cutters...you will end up replacing them almost every few days if you build often. I have some Lindstrom Cutters that are almost 4 months old and bhave cut countless staggertons, ssfc's, aliens and so forth and still cut ribbon like they are new.
Most flush cutters will cut great for about a week and then they wont cut ribbon easily anymore and then need to be replaced.
With a good pair of cutters you can cut ribbon holding its edges and it wont twist it, it wont distort or warp the ribbon....just straight through.
Lindstrom Cutters LINK
Remember these are 4 months old and you've seen all the builds on my instagram and here, not to mention the 1000's of aliens Ive cut for advancedvapesupply....
What's that half dub ohming at ?Whoah so I haven't posted in here in a while...
So here's some builds of mine!
42/42 staggerton
Colorful framed staple aliens
My personal favorite: half dub
Sent from my iPhone using Tapatalk
Sent from my Z981 using Tapatalk
Tom_Forde
Member For 4 Years
