Playing with more corrugated wire. Corrugated braidator.
Sent from my VIE-L29 using Tapatalk
I haven't tried a Braided build yet.. I bet it looks Sick AF when firing!
Become a Patron!
Post your builds
- Thread starter Vape_geek
- Start date
I haven't tried a Braided build yet.. I bet it looks Sick AF when firing!
They take a long time to make but I find the process therapeutic. Try it out
yup, it does haha! I didn't have enough time for a glow shot on this because by the time I finished making the braids, I had to be up in 3 hours and I haven't even photographed the damn thing yet 
Sent from my VIE-L29 using Tapatalk
My fatty. Didn't fit the post holes. If I had done a 10ply it would have been perfect.
0.08ohm
0.08ohm
The Limitless wick fast enough for that juice hog???My fatty. Didn't fit the post holes. If I had done a 10ply it would have been perfect.
0.08ohm
Got some 42n80, 50n80, .5k & .4k on the way
And a mage gta
Screw You.
I'm From Texas.
Yeah. I actually have to cram wick to plug the holes so it doesn't wick too fast and spit. I use rayon though. I'm not sure how cotton would act.
I'm too scared to use rayon
What is there to be scared of? It burns at 800f and if there was anything toxic they couldn't use it for tampons (I use kotex U) It would go right to the blood stream...and much more efficiently than inhaling a vapor off of it. After the coils have gunked up it still looks brand new so it doesn't break down like cotton does. It holds so much liquid you can't really dry hit it. Even after my tank is empty I still have 10 good hits before the flavor goes light and 10 more before it looks dry.
Lol only joking. Just haven't got around to trying it. Yall actually just use the rayon from tampons????
I do. Most use Cellucotton. It's easier to learn with...and it's cheaper but they don't sell it at walmart so I use tampoons. Lol.
It's wierd at first because it goes against everything you learned with cotton.
It's wierd at first because it goes against everything you learned with cotton.
I make my own juice and overpower my builds by 25% so theres a faster ramp and cool down. Your coils gunk up due to sucralose and other additives and the coils remaining hot after you vape.all my builds gunk up fast, so I just clean and cotton daily
I used to rewick daily, now it's weekly or longer.
Yeah, don't you intentionally dry burn it?
And I was thinking silica, it's fucking guys up in the oilfield, just airborne silica sand particuls. I doubt vaping it is okay...
Rayon is just science cotton right?
Okay so just messed with a 3 core (26g) alien with some leftover 36decor (wrapped on 28g) it collapsed (didn't use ribbon sliders or magnets, tried some paperclips) besides collapsing, it did not seem like the decor was the correct size for 3x26 core?
I usually make my juice, but was given alot of free juice and need vg so I have been taking advantage of it. Come to think of it before I went on hiatus, I do not think they gunked up as fast
Yeah, they mix some acid with the pulp and it makes little fibers I think. There's more to it but that's the jist...gist...?
Too small. 3x wider is roughly what you need. 24g or 26g for 3x 26g.
If you use the right sizes and stretch it won't triangle. Ribbon sliders are for holding ribbon between frames. You were right to use paperclips...I use them on everything.
Alright, that's what seemed to be the issue. I wasn't sure if the formula was different from the 2 core to the 3 core. I'm not tinkering again until Saturday. Got some sinus infection from a coworker so I'm not quite up to it. But I had about a foot of decor sitting there and had to try.
Might just have to have my wife get some kotex u this weekend lol
Look all over the box for 100% Rayon. The woman looked at me crazy because I was thoroughly inspecting them. Lol.
mikekscholz
Member For 4 Years
Im giddy... my SS petri rta comes tomorrow... Im about to try building some little alien framed staples for it
U gonna like thatIm giddy... my SS petri rta comes tomorrow... Im about to try building some little alien framed staples for it
Beautiful mate, especially love the colourshotNew one for the aeronaut v2. Double enigma with vertebraid inlay 2x28gka1/8x.4n80 8x.4ka1/2x38gn80 interlocking with 3x36gss316L vertebraid.
Once again, thanks @raymo2u for the tips. Most awesome builder out there
Sent from my VIE-L29 using Tapatalk
EliteNew one for the aeronaut v2. Double enigma with vertebraid inlay 2x28gka1/8x.4n80 8x.4ka1/2x38gn80 interlocking with 3x36gss316L vertebraid.
Once again, thanks @raymo2u for the tips. Most awesome builder out there
Sent from my VIE-L29 using Tapatalk
I started following this post because I am a new builder..safe to say I won't be posting anything this awesome for a long time! Yall got talent
Sent from my SM-G935V using Tapatalk
Sent from my SM-G935V using Tapatalk
72v train battery?
now we're talking ol CB linear days! dropping the maul. wouldn't waste a good train or 24v semi battery on a danky copper coil! breaka breaka, 87 on the west coast droppen the maul! Noooooo doubt about it!
Sent from a phone
That is beautiful!
Raymo sent me one of his enigmas with microclapton inlay I'm gonna put in my pharaoh. Later today.
I'm glad for you. I love dotmod stuff.Im giddy... my SS petri rta comes tomorrow... Im about to try building some little alien framed staples for it
Using 28g frames:
6 ply = 26g decore
8 ply = 25g decore (24g might work)
10 ply = 24g decore
Tom Forde gave me this list a while ago and I've used it since.
That's like romex!
What did you get it for? J/w.
It looks like I need to stop helping others...your going to start making me look badNew one for the aeronaut v2. Double enigma with vertebraid inlay 2x28gka1/8x.4n80 8x.4ka1/2x38gn80 interlocking with 3x36gss316L vertebraid.
Once again, thanks @raymo2u for the tips. Most awesome builder out there
Sent from my VIE-L29 using Tapatalk
Looks beautiful bro!!!
CrazyChef
Custom Hand Crafted Coils - PureCoils.com
VU Vendor
VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
Polished coils
Damn! Some of you guys have really been advancing like crazy lately! And the usuals are still killing it and pushing the envelope on the daily. I've been saving all your guys tips and tricks for when I get my new vape station setup in the basement. I haven't built anything besides naked wire builds in a while now. Been hard to find time to spin wire with the baby in the house, and its far too cold for me to be back outside building for any length of time like I was this summer. Im itching to get the drill out and start pushing myself to get Aliens down well, and then start getting advanced from there.
Been cleaning up the basement after the previous tenant moved out of the downstairs apartment in our building, and we took over. They left an absolute mess down there, but they also left a metal work bench with a ton of shelving and storage attached to the back of it that would be perfect for storing all of my vape stuff, as well to setup a nice coil building station. Trying to clean the whole area up before I bring anything down there that is vape related, and painting the work bench so that I have a fresh surface to work off of.
Been cleaning up the basement after the previous tenant moved out of the downstairs apartment in our building, and we took over. They left an absolute mess down there, but they also left a metal work bench with a ton of shelving and storage attached to the back of it that would be perfect for storing all of my vape stuff, as well to setup a nice coil building station. Trying to clean the whole area up before I bring anything down there that is vape related, and painting the work bench so that I have a fresh surface to work off of.
Skip stagger. Should have used n80 for the wrap so the ribbon and wrap would be different.
New one for the aeronaut v2. Double enigma with vertebraid inlay 2x28gka1/8x.4n80 8x.4ka1/2x38gn80 interlocking with 3x36gss316L vertebraid.
Once again, thanks @raymo2u for the tips. Most awesome builder out there
Sent from my VIE-L29 using Tapatalk
You captured some awesome colours there, fairplay
what did you decore on ?
Skip stagger. Should have used n80 for the wrap so the ribbon and wrap would be different.
Youre moving on up that ladder real fast mate, awesome stuff
Interlocking Enigma Staggerton
I have it coiled..just havent taken any pics yet/...
Specs: 10 x .3RN80/36TM316L/28TM316L/2 x 42TM316L
Im not sure if Im supposed to be sharing this yet but I was sent it to expose it as its the first look for anyone on this RDTA yet. Augvape Merlin RDTA prototype, its looks like the limitless but the look and airflow style is all it shares with it.
Posts are large but not overly bulky, wide squarish post holes...like the tsunami. You wick it like the Boreas or Aromizer Supreme. It has a wide open tank at the bottom that dispenses juice through 1.3mm holes in the deck where the wicks would be located. I was worried at first but after wicking it and using it it has shown that its a good design, no leaking..
This thing is sexy as hell IMO..
Its got some 3x28TM316L/42TM316L Aliens with Staged Heating
I have it coiled..just havent taken any pics yet/...
Specs: 10 x .3RN80/36TM316L/28TM316L/2 x 42TM316L
Im not sure if Im supposed to be sharing this yet but I was sent it to expose it as its the first look for anyone on this RDTA yet. Augvape Merlin RDTA prototype, its looks like the limitless but the look and airflow style is all it shares with it.
Posts are large but not overly bulky, wide squarish post holes...like the tsunami. You wick it like the Boreas or Aromizer Supreme. It has a wide open tank at the bottom that dispenses juice through 1.3mm holes in the deck where the wicks would be located. I was worried at first but after wicking it and using it it has shown that its a good design, no leaking..
This thing is sexy as hell IMO..
Its got some 3x28TM316L/42TM316L Aliens with Staged Heating
I Decored on a 30g hereYou captured some awesome colours there, fairplay
pretty pleased with the colors myself! Didn't exactly expect this build to turn out this nice. @raymo2u nooo. Haha we need your help! Haha thanks a lot bro
You captured some awesome colours there, fairplay
Sent from my VIE-L29 using Tapatalk
I Decored on a 30g hereYou captured some awesome colours there, fairplay
pretty pleased with the colors myself! Didn't exactly expect this build to turn out this nice. @raymo2u nooo. Haha we need your help! Haha thanks a lot bro
You captured some awesome colours there, fairplay
Sent from my VIE-L29 using Tapatalk
any idea on when it will be released?Interlocking Enigma Staggerton
I have it coiled..just havent taken any pics yet/...
Specs: 10 x .3RN80/36TM316L/28TM316L/2 x 42TM316L
Im not sure if Im supposed to be sharing this yet but I was sent it to expose it as its the first look for anyone on this RDTA yet. Augvape Merlin RDTA prototype, its looks like the limitless but the look and airflow style is all it shares with it.
Posts are large but not overly bulky, wide squarish post holes...like the tsunami. You wick it like the Boreas or Aromizer Supreme. It has a wide open tank at the bottom that dispenses juice through 1.3mm holes in the deck where the wicks would be located. I was worried at first but after wicking it and using it it has shown that its a good design, no leaking..
This thing is sexy as hell IMO..
Its got some 3x28TM316L/42TM316L Aliens with Staged Heating
View attachment 66895 View attachment 66896
I want one!
Sent from a phone
@raymo2u
Thats exactly what I mean when I say the Limitless could have been done much better. I love that thing.
Especially the "S" bling. Looks like they used m3.5 screws too...ones that match.
How's the top cap? I'm fine with derlin so long as it's not cheap and shitty...
I like the wicking too. I bet guys that use cotton with the Limitless have a hard time keeping it from leaking.
Even the post thickness is nice. I'm not sure if having 1mm of extra contact equates to less drop but I'll take what I can get.
Edit:
They should ditch the seperate post holes all together and do it like a Kennedy or Petri with one top screw so I can keep my legs flat. Just my $0.02.
Thats exactly what I mean when I say the Limitless could have been done much better. I love that thing.
Especially the "S" bling. Looks like they used m3.5 screws too...ones that match.
How's the top cap? I'm fine with derlin so long as it's not cheap and shitty...
I like the wicking too. I bet guys that use cotton with the Limitless have a hard time keeping it from leaking.
Even the post thickness is nice. I'm not sure if having 1mm of extra contact equates to less drop but I'll take what I can get.
Edit:
They should ditch the seperate post holes all together and do it like a Kennedy or Petri with one top screw so I can keep my legs flat. Just my $0.02.
Last edited:
This is my first ever coil.
Sent from my SM-G935V using Tapatalk
Sent from my SM-G935V using Tapatalk
CrazyChef
Custom Hand Crafted Coils - PureCoils.com
VU Vendor
VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
It's kinda small...
It's a 3mm internal diameter. .8 ohms. Was shooting for somewhere in there. I imagine the longer it is, the more surface area in contact with the cotton...and more vapor right
Sent from my SM-G935V using Tapatalk
Sent from my SM-G935V using Tapatalk