Post your builds

huston · Jul 30, 2015

simple 7 wrap 26g comes in at .49 2.5mm

bananahands · Jul 31, 2015

Dual coil, 7 wraps, 3mm ID, 26/32 gauge clapton, running at 0.34 ohms. Built on an authentic atty3. Amazing flavor and pretty decent clouds.

Sent from my SAMSUNG-SM-N910A using Tapatalk

ChooChooTrain · Jul 31, 2015

Fused clapton flattened/ 2 leads of 26g kan wrapped with 36g nic80 fused with 32g nic80 4 wrap 3.5mm 0.42 ohm. About a 1.5 ramp up. 4.7v / 50w on my encom Tnt 80 box mod built on a Mutation X V2 rda.

Sent from my SM-N900T using Tapatalk

Vaping Cracker · Jul 31, 2015

scarecrowjenkins said:
Nice build! Nichrome 80 would work a little better for you with the claptons if you don't think they're warm enough. Jacobs-online.com has an awesome selection, and so does twistedmesses.com. You might find the 36-40g easier to work with for wrapping claptons. Either way, keep exploring, and good luck!

Thanks for the wire links. I've been on a coil building hiatus to work on some e-juice recipes. I've got 12 solid flavors so it's back to building after I get some wires in the mail. Still rocking my previous dual clapton build. I've found wicking with Cellucotton (rayon) works best with claptons for me. I have Cotton Bacon and Koh Gen Doh but I find the Cellucotton has the best flavor and lasts a little longer. Does anyone else use Cellucotton? Thanks again Scarecrow.

iLiptiKal · Jul 31, 2015

100%! I use rayon for every one of my builds. It's what my local B&M gave me with my first RDA and have been using it since. I've tried organic a few times and I don't like it nearly as much.

Sent from my iPhone using Tapatalk

ChooChooTrain · Jul 31, 2015

I get all my wire from Lightningvapes.com great price and spot on customer service.

Sent from my SM-N900T using Tapatalk

Vaping Cracker · Aug 1, 2015

I bought this from a beauty supply store. 500 feet. Wick for years. Lol. The flavor from juice is very pure.

ChooChooTrain · Aug 1, 2015

This is the 40 foot link.
http://www.houseofbeautyworld.com/s...x9K8wQITEwcPqUiQQpNI0JGe8HyobRYJ2eBoCT-bw_wcB

Sent from my SM-N900T using Tapatalk

Vaping Cracker · Aug 1, 2015

I paid $13 for 500 feet at Sally Beauty Supply in the U.S. If you have a Sally Beauty Supply, check them out. Or maybe any other local beauty supply store.

Ruben · Aug 2, 2015

Twisted 26g paralleled with 24g kanthal, 7 wraps a side, 3mm at .157ohm.

Rommel · Aug 3, 2015

Thats what 5-7mls of Five Pawns does to your coil. Turns it into gore.

VapingN252 · Aug 3, 2015

oh my

ChooChooTrain · Aug 3, 2015

Looks like they use a ton of sweeter .

Sent from my SM-N900T using Tapatalk

DickyT · Aug 3, 2015

Vaping Cracker said:
I paid $13 for 500 feet at Sally Beauty Supply in the U.S. If you have a Sally Beauty Supply, check them out. Or maybe any other local beauty supply store.

It was $12 at my local Sally's. I have the same box.

iLiptiKal · Aug 3, 2015

What I've been up to

Sent from my iPhone using Tapatalk

KayOhBe · Aug 3, 2015

Finally got a dual coil working exactly right
24g 10 wraps reading in at .3Ω

Sent from my CM 12.One using Tapatalk

Ruben · Aug 3, 2015

Quad coils, lowers are 26g twisted, uppers are single 24g, 5 wraps 3mm, .134 ohm

ChooChooTrain · Aug 3, 2015

iLiptiKal said:
What I've been up to

Sent from my iPhone using Tapatalk

Looks like a touch of the coil fever!! Haha welcome to the family..

Sent from my SM-N900T using Tapatalk

ChooChooTrain · Aug 3, 2015

Ruben said:
Quad coils, lowers are 26g twisted, uppers are single 24g, 5 wraps 3mm, .134 ohm

Hey Ruben watch out for that ipv4 you got brother mine caught fire just sitting on my end table. My ipv4 was off and I have never used the charge port, I'll grab the pics and post in a few.

Sent from my SM-N900T using Tapatalk

Ruben · Aug 3, 2015

ChooChooTrain said:
Hey Ruben watch out for that ipv4 you got brother mine caught fire just sitting on my end table. My ipv4 was off and I have never used the charge port, I'll grab the pics and post in a few.

Sent from my SM-N900T using Tapatalk

I already exorcized that demon. Charge board was removed plus the update to IPV4s was supposed to
Deactivate it.

VapingN252 · Aug 4, 2015

28 Guage nickel. 8 wraps per coil. 2 mm. Comes to .065. 95 watts preheat with 80 watts constant. 435 degrees

DarthVaper89 · Aug 5, 2015

26g core claptoned with 32g, parallel with 26g, all kanthal a1. Ohms out to .21, this was a first attempt too.

Rommel · Aug 5, 2015

42/24ga clapton coils. This 42ga looks like nothing...

denrock316 · Aug 6, 2015

30mm Tobh 24g 7wrap 3mm

Jasonfox1988 · Aug 6, 2015

clapton coil

happy vaping

KayOhBe · Aug 6, 2015

Well done Jason!
Btw, which tank is that? Sub, or mini, or something else?
And finally, which gauges did you use?

Sent from my CM 12.One using Tapatalk

USMCotaku · Aug 6, 2015

http://www.ecigarettedirect.co.uk/a...okin-cool-fire-4-enter-in-seconds?lucky=12356

Innokin coolfireIV giveaway!
Sent with one hand, the other is busy vaping.

bananahands · Aug 6, 2015

Rommel said:
42/24ga clapton coils. This 42ga looks like nothing...

Damn nice work! Where did you get that 42?!

Sent from my SAMSUNG-SM-N910A using Tapatalk

bananahands · Aug 6, 2015

Triple twisted 28 kanthal, claptoned with 30. Dual coil on a Lycan atty. 3mm ID, 7 wraps each side, pushing 0.36 ohms

Sent from my SAMSUNG-SM-N910A using Tapatalk

scarecrowjenkins · Aug 6, 2015

26/40g fused claptons. Killer go-to build, well rounded. Great flavor, lots of vapor. All nichrome 80. Dual coils around 3mm clocked in at .15

Rommel · Aug 7, 2015

bananahands said:
Damn nice work! Where did you get that 42?!

Sent from my SAMSUNG-SM-N910A using Tapatalk

Haha, thanks. This stuff is really pushing my patience.. I got this from the vape mesh company in Britain. I have 40ga, 42ga, 44ga and something titled as 0.03mm. Dunno what gauge that would be :/

Rommel · Aug 7, 2015

26KA1/42N80 fused. Much better.

Jasonfox1988 · Aug 7, 2015

KayOhBe said:
Well done Jason!
Btw, which tank is that? Sub, or mini, or something else?
And finally, which gauges did you use?

Sent from my CM 12.One using Tapatalk

Thats a kanger subtank mini and coil is 32gauge wrapped around a 28 gauge kanthal

happy vaping

ChooChooTrain · Aug 7, 2015

32g N80 clapton on 32g N80 then clapton on 26g kan. 5 wraps around 3.5mm clicking in at .96ohm it produces a very nice cloud and great flavor, not sure what I'll call it.

Sent from my SM-N900T using Tapatalk

Jasonfox1988 · Aug 7, 2015

ChooChooTrain said:
32g N80 clapton on 32g N80 then clapton on 26g kan. 5 wraps around 3.5mm clicking in at .96ohm it produces a very nice cloud and great flavor, not sure what I'll call it.

Sent from my SM-N900T using Tapatalk

Bicycle chain lol

happy vaping

ChooChooTrain · Aug 7, 2015

Hey guys after vaping this coil a couple days just wanted to let you all know that it doesn't keep up with wicking very well. I'm calling this one a tosser..... back to the twisting board.

Sent from my SM-N900T using Tapatalk

Schmucko · Aug 9, 2015

Asymmetrical dual coil. 26 ga. 7 wraps spaced w/ID @3mm on top and 26 ga. 8 wraps tidy w/ID @ 2.5mm on bottom clocking in at .50 ohms. Both fire in unison on my mutation v4 and Jr gets a little extra airflow off the side giving me exceptional flavor and vapor production

scarecrowjenkins · Aug 9, 2015

Alien/Fused Clapton parallel coils.

Since i posted this build on the fancy coil thread yesterday, i figured i'd post different shots here. Same performance video though.
I have REALLY been enjoying this build. Not only is it handsome, but it provides an incredibly satisfying vape. Flavor is absolutely bonkers, and vapor production is solid. I wanted to increase the surface area of the alien wire without running a single parallel wire, so i made some really tiny fused claptons instead. Fantastic results.
Specs for those interested:
3x 30g/36g alien coils
2x 32/36g fused claptons
4/5 wraps around 2.4mm screwdriver clocks in at
.10 for dual coils. Running in the Twisted Messes RDA atop the Rage Modz parallel 18650 mech box.

itsmenotyou · Aug 9, 2015

Phone takes shitty pics but here's a 28/32 clapton parallel with twisted 28. Ohm out at .4 on the ipv mini2

blipt · Aug 9, 2015

you gotta start somewhere....the lowest I achieved this far it was a .37ohm my I stick reads it at .4

Sent from my LG-D850 using Tapatalk

blipt · Aug 9, 2015

I was just messing around could I put this coil on my lemo2?

it won't fit into the tiny holes but I could wrap around screw head?

Sent from my LG-D850 using Tapatalk

Vapingbeauty · Aug 9, 2015

Alright guys need HELP....Just got my tc mod a few days ago with matching asmodus rda and I am having trouble building higher than .04ohms which is the snowwolfs lowest possible build

Sent from my SM-N910V using Tapatalk

Vapingbeauty · Aug 9, 2015

Vapingbeauty said:
Alright guy need HELP....Just got my tc mod a few days ago with matching asmodus rda and I am having trouble building higher than .04ohms which is the snowwolfs lowest possible build

Sent from my SM-N910V using Tapatalk

I only have 30g ni200 right now along with nicrome and kanthal I thought about a twisted build I read that it would still work in tc mod ....THOUGHTS PLEASE ON ANY BUILD FOR THIS

Sent from my SM-N910V using Tapatalk

Rommel · Aug 9, 2015

Bigger diameter coil, like 3mm or 1/8 and five wraps if a single, ten for a dual.

Vapingbeauty · Aug 9, 2015

Rommel said:
Bigger diameter coil, like 3mm or 1/8 and five wraps if a single, ten for a dual.

Yes I am doing dual thank you

Sent from my SM-N910V using Tapatalk

itsmenotyou · Aug 9, 2015

itsmenotyou said:
Phone takes shitty pics but here's a 28/32 clapton parallel with twisted 28. Ohm out at .4 on the ipv mini2

Update.

Flavor is top notch off of this and vapor is better then my "go to" build of 2 24 ga 7 wrap on 2.5mm. Overall worth the 15 mins to make it

Cmd.Gio.420 · Aug 9, 2015

I dnt have a clue what this build is called but its my 1st attempt at it.. 24g 3 wraps on each vertical coils & 6 wraps on the horizontal coils.. Came out to .45ohms on 2.4mm screwdriver.. A lil higher than expected

Sent from my Nexus 5 using Tapatalk

ChooChooTrain · Aug 9, 2015

I use 14 wraps 30g nickel on a 3.5 gives me a .9

Sent from my SM-N900T using Tapatalk

KayOhBe · Aug 9, 2015

Finally figured out how to get my negative leads to position properly [:=
24 gauge kanthal, 10 wraps, reading in at .3Ω, wrapped around a 3mm screwdriver

Sent from my CM 12.One using Tapatalk

Vapingbeauty · Aug 9, 2015

Dual 30g ni200 4mm 9/10 wraps reading @.14ohms

Sent from my SM-N910V using Tapatalk

Post your builds

╭∩╮(-_-)╭∩╮

Attachments

VU Sponsors