Post your builds

[Vapingbeauty]

Dual 30g ni200 4mm 9/10 wraps reading @.14ohms

Sent from my SM-N910V using Tapatalk

Sorry for shitting picture

Not to bad for the second time building with ni200

Sent from my SM-N910V using Tapatalk

 

[Rommel]

Next time you should space the wraps. Get a small screw with 3-3.5mm diameter, you will get perfect spacing and better performance from the nickel.

 

[Jasonfox1988]

Just tryed the clapton coil in the new rba deck and new graded kanger subtank mini and it seems alot hotter and less flavour compared to my other subtank mini and old kanger tank mini anyone know why this is?

 

[ChooChooTrain]

Just tryed the clapton coil in the new rba deck and new graded kanger subtank mini and it seems alot hotter and less flavour compared to my other subtank mini and old kanger tank mini anyone know why this is?

Yea Kanger sucks, enough said.

Sent from my SM-N900T using Tapatalk

 

[Jasonfox1988]

Yea Kanger sucks, enough said.

Sent from my SM-N900T using Tapatalk

The new tank with bvc coils are beast for flavour and vapour tho!
My old kanger tank with clapton coil is beast to new tank and rba just dont seem to like the clapton coil lol
What tank are you running? I also have lemo2 but i yet to geg better flavour then the kanger tank yet lol


happy vaping

 

[ChooChooTrain]

I have about 18 tanks and thus far the Aspire Mega gives me the best flavor/cloud with that said I drip more then anything and most all my builds are a clapton of some sort as of now I haven't built a coil that gives better flavor then the Claptons do.....well other then the catapillar track coil. What ohm is your wrap running at?

Sent from my SM-N900T using Tapatalk

 

[Jasonfox1988]

I have about 18 tanks and thus far the Aspire Mega gives me the best flavor/cloud with that said I drip more then anything and most all my builds are a clapton of some sort as of now I haven't built a coil that gives better flavor then the Claptons do.....well other then the catapillar track coil. What ohm is your wrap running at?

Sent from my SM-N900T using Tapatalk

28gauge core 32gauge round it 5 wraps round 2mm gives 1ohm


happy vaping

 

[ChooChooTrain]

I wrap 26g core 30g clapton but I use nic80 wire, what device are you using and at what watts? I would try a bit hotter build like a .6 .5 ohm

Sent from my SM-N900T using Tapatalk

 

[Jasonfox1988]

I wrap 26g core 30g clapton but I use nic80 wire, what device are you using and at what watts? I would try a bit hotter build like a .6 .5 ohm

Sent from my SM-N900T using Tapatalk

I bought this pre made to save hassle of making it but i am gona buy a 26 gauge core next
I got old sub tank on istick 30w at 28-30w and the kanger sub box same watts


happy vaping

 

[ChooChooTrain]

I bought this pre made to save hassle of making it but i am gona buy a 26 gauge core next
I got old sub tank on istick 30w at 28-30w and the kanger sub box same watts


happy vaping

Yea 1.0 ohm at 30w isn't what I would be vaping brother, I would bring down the ohm if possible. I think that would make the differance ( with the clapton coil) and your device is so limited I would recommend the tnt 80 box mod, I'll post a link.

Sent from my SM-N900T using Tapatalk

 

[ChooChooTrain]

Yea 1.0 ohm at 30w isn't what I would be vaping brother, I would bring down the ohm if possible. I think that would make the differance ( with the clapton coil) and your device is so limited I would recommend the tnt 80 box mod, I'll post a link.

Sent from my SM-N900T using Tapatalk

http://www.vaporbeast.com/encom-tnt-80w-box-mod.html

Sent from my SM-N900T using Tapatalk

 

[Jasonfox1988]

Yea 1.0 ohm at 30w isn't what I would be vaping brother, I would bring down the ohm if possible. I think that would make the differance ( with the clapton coil) and your device is so limited I would recommend the tnt 80 box mod, I'll post a link.

Sent from my SM-N900T using Tapatalk

What would u vape it at 28w seems good for that i have a 50w mod aswell


happy vaping

 

[ChooChooTrain]

I would be vaping 1.0ohm at 50w-60w but that's me. I'm not sure what the limits are on your rba

Sent from my SM-N900T using Tapatalk

 

[Jasonfox1988]

I would be vaping 1.0ohm at 50w-60w but that's me. I'm not sure what the limits are on your rba

Sent from my SM-N900T using Tapatalk

Really! I tryed upping the watts on my 50w and was scorching hot for me dint like it atall lol


happy vaping

 

[ChooChooTrain]

Really! I tryed upping the watts on my 50w and was scorching hot for me dint like it atall lol


happy vaping

Well lol I just don't know what to say..... I haven't had a clapton build yet not to give me nice flavor, but then again I like a hot vape. I would say bring down the ohm on the clapton build then try again.

Sent from my SM-N900T using Tapatalk

 

[ChooChooTrain]

.5 ohm clapton at 30w might be a better vape.

Sent from my SM-N900T using Tapatalk

 

[vaping_in_dirty_jerz]

So I did a thing today while the site was down I call it the vertizontal coil it's 24g kanthal a1 5 wrap in both around I was to say 1.5 to 2mm screwdriver ohms out at .19 ohms good clouds good vapor

 

[dismantlebob]

Ni200 clapton 26g/28g reads .065

 

[martinelias]

2nd time trying out this transformer build, came out way better than the first, was unable to center it though which kinda sucks the leads were too short. Still chucks the flavor and the clouds in mutation v4 sitting on cherrybomber @ .1 ohms.

The toughest part was getting it in the post holes.

 

[ChooChooTrain]

2nd time trying out this transformer build, came out way better than the first, was unable to center it though which kinda sucks the leads were too short. Still chucks the flavor and the clouds in mutation v4 sitting on cherrybomber @ .1 ohms.

The toughest part was getting it in the post holes.

This is truly a tough build, well done

Sent from my SM-N900T using Tapatalk

 

[martinelias]

This is truly a tough build, well done

Sent from my SM-N900T using Tapatalk

I need a better drill. It was having a rough time with spinning the 36g kanthal over the 26g nichrome, so i cut a corner and wrapped it spaced out a little. End result was good but with a better drill i can spin it without spaces.
What drills do you guys use?

 

[ChooChooTrain]

I need a better drill. It was having a rough time with spinning the 36g kanthal over the 26g nichrome, so i cut a corner and wrapped it spaced out a little. End result was good but with a better drill i can spin it without spaces.
What drills do you guys use?

I used a cordless for the longest but after a few times wrapping a fused staple clapton and the battery died I was done with cordless, I now use a regular plug in and C clamp it to my work station. Works very well.

Sent from my SM-N900T using Tapatalk

 

[vaping_in_dirty_jerz]

I need a better drill. It was having a rough time with spinning the 36g kanthal over the 26g nichrome, so i cut a corner and wrapped it spaced out a little. End result was good but with a better drill i can spin it without spaces.
What drills do you guys use?

Im not anywhere near builds like that yet but I do know good battery operated drills some good ones are dewalt makita which are two of the most popular that i know of and work rather well

 

[ChooChooTrain]

Also took the trigger of the drill and wired it to a dimmer switch hint hint.

Sent from my SM-N900T using Tapatalk

 

[martinelias]

I use a 14.4v dewalt which was a beast but halfway through the clapton it drops a great deal, making it an eternal process, especially the thinner claptons. Maybe the batteries are done for.

 

[Ruben]

I use a 14.4v dewalt which was a beast but halfway through the clapton it drops a great deal, making it an eternal process, especially the thinner claptons. Maybe the batteries are done for.

Your batteries need replacement. Go buy a few new 14.4v cells and you'll see it's not the drill.

 

[KayOhBe]

Have I got the cotton wicked properly? Kinda makes sort of a 'rainbow' shape.
Also - made a chuff cap out of a Tylenol bottle lol


Sent from my CM 12.One using Tapatalk

 

[USMCotaku]

I need a better drill. It was having a rough time with spinning the 36g kanthal over the 26g nichrome, so i cut a corner and wrapped it spaced out a little. End result was good but with a better drill i can spin it without spaces.
What drills do you guys use?

18v Ryobi with li-ion battery packs.... Really does the trick

 

[407Vapes]

I think I'm finally starting to get the hang of this.
26g Ka1
Wrapped around 5/64 drill bit @ 8 wraps
Coming in at .4ohms

Could be cleaner though, but I kind of rushed it. Also I know I could work on my wicking.

Sent from my SAMSUNG-SM-G900A using Tapatalk

 

[Vapingbeauty]

Still struggling with my nickel builds this is a dual ni200 30g 9/0 w on 3.5mm reading .09 ohms

Sent from my SM-N910V using Tapatalk

 

[Vapingbeauty]

Still struggling with my nickel builds this is a dual ni200 30g 9/0 w on 3.5mm reading .09 ohms

Sent from my SM-N910V using Tapatalk

Constructive criticism welcome or ideas

Sent from my SM-N910V using Tapatalk

 

[KayOhBe]

Okay so here's my 1st attempt at a dual coil with different coils. Took forever to get identical resistance and for them to fire equally but here it is:


Sent from my CM 12.One using Tapatalk

 

[VapingN252]

Ni200 clapton 26g/28g reads .065

I so want to try this

 

[AstroTurf]

View attachment 26978
Have I got the cotton wicked properly? Kinda makes sort of a 'rainbow' shape.
Also - made a chuff cap out of a Tylenol bottle lol
View attachment 26979

Sent from my CM 12.One using Tapatalk

Looks Good.

You can also vary the height of the coil in relation to your air inlets to adjust the flavor, vapor, and throat hit.

Jim

 

[AstroTurf]

Constructive criticism welcome or ideas

Sent from my SM-N910V using Tapatalk

Can you try to center the coils?

It will even out the cotton/wick load.

Jim

 

[itsmenotyou]

24/32 .34 ohm. 3mm 7wrap


sent from a dumb operated smart phone

 

[AndyRoundhead]

my best build yet. 24g nichrome parallel 5 wraps. First read .15 ohms and after vaping for a bit and letting it cool down now reads .23.

Sent from my Z995 using Tapatalk

 

[AndyRoundhead]

my best build yet. 24g nichrome parallel 5 wraps. First read .15 ohms and after vaping for a bit and letting it cool down now reads .23.

Sent from my Z995 using Tapatalk

Oh on a dark horse clone on a ipv mini 2 vaping at 60 watts.

Sent from my Z995 using Tapatalk

 

[Vapingbeauty]

Can you try to center the coils?

It will even out the cotton/wick load.

Jim

Do you mean got to the further post not the one right next to each other?

Sent from my SM-N910V using Tapatalk

 

[AstroTurf]

Do you mean got to the further post not the one right next to each other?

Sent from my SM-N910V using Tapatalk

Not to sure of the question, But...

Try to shift the coils, (can't move the posts), More towards the center of the build deck.

This will even out the distance from right to left for an equal amount of space for cotton.

Jim

EDIT: Yes, to answer your question, Yes.

 

[Jasonfox1988]

I use a 14.4v dewalt which was a beast but halfway through the clapton it drops a great deal, making it an eternal process, especially the thinner claptons. Maybe the batteries are done for.

I agree it aint the drill we use makita or dewalt 18v all day at work no problem


happy vaping

 

[Vapingbeauty]

Not to sure of the question, But...

Try to shift the coils, (can't move the posts), More towards the center of the build deck.

This will even out the distance from right to left for an equal amount of space for cotton.

Jim

EDIT: Yes, to answer your question, Yes.

Yes I meant use the positive post that further away from each negative one ...I thought of this after I had a perfect usable build on there that's not giving me any trouble so the next one I will try this thank you

Sent from my SM-N910V using Tapatalk

 

[deanxavier]

3 x 28g Kanthal Twist ... Dual Coil 5t ... First decent build for me I think... Fires at .22ohm.



Sent from my version of reality to yours using technology.

 

[Davect06607]

Here is a few that I have done recently:
20g, 3mm 6 wrap, .2ohms

24g, 8 wrap parralles, 2.5 mm, .16ohm

This is my adv build-9wrap, 24g, 3mm, .24ohms

 

[lcgixxer87]

Here is a few that I have done recently:
20g, 3mm 6 wrap, .2ohms

24g, 8 wrap parralles, 2.5 mm, .16ohm

This is my adv build-9wrap, 24g, 3mm, .24ohms

How's the newer version of the petri treating you?



Sent from my iPhone using Tapatalk

 

[Davect06607]

How's the newer version of the petri treating you?



Sent from my iPhone using Tapatalk

My only complaint would be the airflow, not enough. Debating on drilling the air flow holes out a bit.

 

[Typool]

26 gauge kanthal with 36 gauge kanthal fused clapton and paralleled with 24 gauge N80 all wrapped around a 2.5 mm bit coming out to 0.10 ohms. I used the 13 heavens 9 hells RDA. Awesome flavor and clouds fer days.

 

[Typool]

24/32 N80 fused Clapton around 2.5 mm bit coming out to be 0.19 ohms on a troll RDA.

 

[lcgixxer87]

My only complaint would be the airflow, not enough. Debating on drilling the air flow holes out a bit.

Petri is flavor king to me. I've got the first version. Occasionally I wish for a tad more air and the first version has the post turn issue sometimes. I want the new one.


Sent from my iPhone using Tapatalk

 

[Rommel]

My new love, Aeolus V2 Pro.