Post your builds

[denrock316]

Well my phone doesn't take the greatest pics but I made my very first Clapton coils tonight. 24/32 5 wraps dual coil 3mm came out .23 ohms. Keeping every thing steady with the drill is a real pain. I attempted I think somewhere near 4-5ft just to get enough to make 2 decent coils. I can't wait till my 15ft roll of already made clapton wire gets here. But I got out the drill tonight mainly because I wanted to be able to say I did it. RDA is a Mutation X V4 I have all 18 air holes wide open and it chucks.

 

[s20700134]

Staggered fused Clapton. Nichrome 23/34 on my stro

 

[claviger]

A tri-wire titanium twist I did up, looks weird and frankly kind of sloppy, but it vapes like mad!!

 

[VapingN252]

That temp control or regular wattage?

 

[Cmd.Gio.420]

24g/26g twisted kanthal.. 5 wraps 3mm came out to .22 ohms.. Goes thru juice like crazy tho

Sent from my Nexus 5 using Tapatalk

 

[Jasonfox1988]

Nobody will beat this 7 wraps of 26g in goblin mini
Has anyone tryed a clapton coil in these?

 

[s20700134]

Nobody will beat this 7 wraps of 26g in goblin mini
Has anyone tryed a clapton coil in these?

8 wrap ti. First build in it was a 29/30 Clapton. Didn't take a pic of it tho

 

[CTFX]

What juice is that? Looks like ecto cooler lol

 

[Jasonfox1988]

8 wrap ti. First build in it was a 29/30 Clapton. Didn't take a pic of it tho

What was the diameter of that clapton i only have 28g core 32g wrapped hopping that will fit with 2mm diameter

 

[claviger]

That temp control or regular wattage?

TC, DNA200 and Snow Wolf mods.

 

[s20700134]

I think a tiny bit smaller than 2mm. It's also 26g

 

[MidwestExpress]

My daily driver...

28 gauge kanthal, twisted, 6 wraps on the screw driver that came with Subtank Mini, at .27 Ohm. 50w=dry hits but 45w and lower is all good! 30 gives great flavor and good smoke. Doesn't drink the juice either. Better on juice use verses my same build but on a 3mm coil.

 

[KayOhBe]

@MidwestExpress Which mod are you using?

Sent from my CM 12.One using Tapatalk [:=

 

[MidwestExpress]

Smok Pro M80 Plus

This is my first setup coming from a cig pen. Love it! Does a lot more than what I need but I am growing into it.

 

[KayOhBe]

I dropped a wrap and figured out yet another way to rig my negative leads

5 (and ½?) Wraps on a 3mm using Clapton'd 32/26gauge A1 kanthal reading in at .3Ω

Sent from my CM 12.One using Tapatalk [:=

 

[CTFX]

I dropped a wrap and figured out yet another way to rig my negative leads

5 (and ½?) Wraps on a 3mm using Clapton'd 32/26gauge A1 kanthal reading in at .3Ω

Sent from my CM 12.One using Tapatalk [:=

Looks Uber sexy!

 

[KurtMcCarter]

24g Kanthal with 32g nickel Clapton'd on it. 7/8 wraps on a 3mil screwdriver, reading at .19 ohms.

 

[richardward77]

build on my goblin mini great taste and vapour production.

Sent from my ST23i using Tapatalk

 

[richardward77]

Can you be more specific?

Ye no problem that is a 24 guage 7 wrap 2mm Id at just over 2 ohm wicked with muji Japanese cotton pads with the outer layers left on and just a tiny bit in the juice well.

another pic to show how the cotton sits took me a while to get the wicking right for this rta think I got it working well now no dry hits or gurgling and to be fair the goblin mini is my fave tank so far

Sent from my ST23i using Tapatalk

 

[claviger]

Decided to try out mixed metal TC:

24 gauge Ti core, 30 gauge Kanthal A1 wrapped, 3mm diamter, 0.13 ohms, 6 wrap........ really good vape. Makes TC a bit wonky, but adjusting the temp downwards stops cotton from burning just fine.

 

[kleinste_giraffe]

I did a simple dual parallel. I'm still learning, but I did 12 wraps with 28 gauge. Came out to .25. I made a vertebraid, but the post holes on my plume veil are too small so my bf ended up using it.

 

[CrazyChef]

Well, I'm gettin' better... If you look at my previous posts in this thread, you'll see what I mean.

Anyways, this is my first attempt at a twisted wire coil. I used 4 pieces of 26g kanthal. Wrapped it 5 times at 3mm. It's kinda hard to tell from the pic, but it comes in at 0.27ohms. I think I shoulda used a bit more cotton to tuck, but I'll remember that for next time, or maybe rewick this one. Now I'm gonna need a stronger mod - My iStick 50W takes a couple seconds at full power to heat this thing up.

Oh, one more thing - this little bugger started out at 3 feet of wire with very little waste.

 

[Pitbullgrin]

Dual twisted 32g around 28g clapton I'd 2mm, 0.6 ohms. So yummy

 

[Gawgaboi]

Staged 26/32g clapton and 22g kanthal

 

[Jasonfox1988]

30g twisted in the goblin

 

[blipt]

my 10 wrap 24g in my only rda....little boy

Sent from my LG-D850 using Tapatalk

 

[blipt]

It's a Lil sloppy but it's only my 4th time

Sent from my LG-D850 using Tapatalk

 

[CTFX]

my 10 wrap 24g in my only rda....little boy

Sent from my LG-D850 using Tapatalk

Looks pretty damn sweet to me. If that's sloppy I wonder what perfect looks like lol

 

[blipt]

Well the last loop on the bottom is sloppy I'm a perfectionist

Sent from my LG-D850 using Tapatalk

 

[CTFX]

What ohms yiu running on that?

 

[blipt]

.5

Sent from my LG-D850 using Tapatalk

 

[blipt]

Technically

Sent from my LG-D850 using Tapatalk

 

[CTFX]

What box?

 

[blipt]

ELEAF 50w set at 50w I need a bigger box....doesn't get good and warm till coils start looking ruff if ya know what I mean

Sent from my LG-D850 using Tapatalk

 

[CTFX]

Precisely man

 

[Cmd.Gio.420]

my very 1st fused Clapton single coil.. I'm not at home atm so I did it by hand.. 30g wrapped around 2 24g kanthal,2.4mm in diameter,5 wraps came out to .22 ohms.. Very sloppy IMHO lol

Sent from my Nexus 5 using Tapatalk

 

[blipt]

I do all mine by hand....just a drill bit and my hand

Sent from my LG-D850 using Tapatalk

 

[KayOhBe]

Blipt! I really like how you have your leads/posts set up! Haven't thought of doing it that way - just put em in two adjacent posts and push it towards center. I might do that with my next build, I've always used posts that weren't adjacent. My RDA is a 4 post like urs

Sent from my CM 12.One using Tapatalk [:=

 

[AndyRoundhead]

Blipt! I really like how you have your leads/posts set up! Haven't thought of doing it that way - just put em in two adjacent posts and push it towards center. I might do that with my next build, I've always used posts that weren't adjacent. My RDA is a 4 post like urs

Sent from my CM 12.One using Tapatalk [:=

How does he have them set up?

Sent from my Z995 using Tapatalk

 

[scarecrowjenkins]

Staggered~Fused Claptons
24/38g Nichrome 80.
.12 ohms
Anarchist Mfg Phenotype-L atomizer.
Damn fine vape. A little less smooth than a regular fused clapton of the same wire composition. Definitely on the warm side. Highly enjoyable.

 

[blipt]

Blipt! I really like how you have your leads/posts set up! Haven't thought of doing it that way - just put em in two adjacent posts and push it towards center. I might do that with my next build, I've always used posts that weren't adjacent. My RDA is a 4 post like urs

Sent from my CM 12.One using Tapatalk [:=

Yep I just tighten them down with a little extra then move em over with the bit inside.....you gotta make sure your positive doesn't touch the coil tho if it does it's a pain to get them to heat correctly

Sent from my LG-D850 using Tapatalk

 

[turnBat]

...

 

[Dom Lam]

28G zipper at 0.2ohm

 

[Dom Lam]

View attachment 325 Wrapped 30g around 30g. .4 ohms. Couldn't get a full draw before running out of juice and tasting cotton.

Cover coil with cotton leaving only one opening in the coil for vapor to exit.

 

[vapour_lounge]

Dual on the subox mini 30g cant remember how many wraps it came out at 0.4
That was a fiddly build lol but a great vape

Sent from my GT-I9505 using Tapatalk

 

[Cmd.Gio.420]

30g wrapped around 2 24g twisted strands came out to .35 ohms.. 2.4 in diameter

Sent from my Nexus 5 using Tapatalk

 

[Gawgaboi]

2 strands 28g twisted with 24g SS

 

[KayOhBe]

Built this for a friend - first time building on a 3 post RDA

Dual coil 6 wraps on a 3mm using A1 Kanthal 32/26g clapton reading at 0.3Ω in his darkhorse mini on his coolfire 4

Sent from my CM 12.One using Tapatalk [:=

 

[itsmenotyou]

I hate 3 post building lol

sent from a dumb operated smart phone

 

[itsmenotyou]

Simple 7/8 wrap with 24 ga

sent from a dumb operated smart phone