Become a Patron!
Post your builds
- Thread starter Vape_geek
- Start date
turnman34
Member For 4 Years
What site did you get those from??
Ordered Thursday here today meanwhile the ones I ordered two weeks ago aren't here yet but I wanted these more anyways
Sent from the lab in my basement of vapement
Sent from my iPhone using Tapatalk
AngelCigs, I linked to the site and the Aromamizer deal a page or 2 back..
Remember next to where it shows how many in stock it shows ETA, thats when it will ship out from AngelCigs to you.
Heres the links, got them for you and dont forget to use coupon 5%downforyou
3ml Aromamizer for 13.99
6ml Aromamizer for 13.99
She bought them off AngelCigs, they are clones of the Aromamizer but seem to have the same quality.
Is it pointless for me to do this with reg kanthal wire and not the flat ribbon?
Sent from my SM-G925V using Tapatalk
Angelcigs but I have it next to the authentic and the only thing that it different is on the authentic I word aromamizer Rdta is smaller than the clone but for 1/4 of the price I'll take it the ones I got today weren't supposed to be mailed out until Christmas day
Sent from the lab in my basement of vapement
turnman34
Member For 4 Years
Thanks!! Sorry should have looked back! This thread has been pretty busy lately!!
Sent from my iPhone using Tapatalk
Thejackson5
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
They look good? I can't wait to get mine!
Sent from the lab in my basement of vapement
Sent from my SM-G925V using Tapatalk
I like how they came with all the colors for the bands I went to order the pink one which was only like 1$ but they wanted 5$ to ship it I told them to keep it and I got 5 pink ones from FT for 2$
Sent from the lab in my basement of vapement
I want to know if a 2x26g/38g+ FC would fit between 4-6 wraps/2-3mm diameter
They all look like shiiit!
You are making my builds look bad you fucker!Its wouldnt be the same build but yes, in CrazyChef's video you can see he did a few builds with that same idea, 10-30 strands of higher gauge wire and Frame them with something lower then Wrap it in something mid-high gauge. I was going to try some 30g Twisted/Framed in 22g/Wrapped in 40g+
Thejackson5
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Look solid to me.
Last edited:
Thejackson5
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Anyone seen the tesla invader 3 240w?
Ive never tried them but I have looked at them, they look nice but I havent seen many using them due to finicky hardware they sold in the past-Not sure if its still like that at Telsa or not.
Im looking into getting something for a friend of mine, loves the Snow Wolf of mine and the TFV4 with my build in it, I may end up giving it away (TFV4) when they RTA's finally arrive but the Mod is still an issue. I have been looking into the Snow Wolf 75w, RX200 (Comes with Herakles Hydra), and the Kanger 70w (Looks like Istick50w) for all around the same price. I will probably get the RX200 combo but the Snow Wolf has a special place in my heart....
Thejackson5
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
The new tesla looks decent to me from looks. Different story when it gets out into the hands of we the people but price point isn't bad considering.
Like a month ago I was going to give my TFVs away THEN someone told me about the Clapton rba for it and now I'm loving the tank I hated it for the longest time and ended up with 4 because they where always add ons for a really good price and I hadn't received the first one at the time but for a good 3/4 months they sat collecting dust
Sent from the lab in my basement of vapement
Sent from the lab in my basement of vapement
Thejackson5
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
I do like the looks of the RX200. A little jealousy going on over here. Lol
Black Friday they where 40$ I got mine for 60 I was so mad but still for what it does 60 is a steal
Sent from the lab in my basement of vapement
I have on hand 24,28,32,40 awg kanthal, 26 awg nichrome, and 28 awg 430 ss. How should I build frame and wrap?They all look like shiiit!
Its wouldnt be the same build but yes, in CrazyChef's video you can see he did a few builds with that same idea, 10-30 strands of higher gauge wire and Frame them with something lower then Wrap it in something mid-high gauge. I was going to try some 30g Twisted/Framed in 22g/Wrapped in 40g+
Sent from my SM-G925V using Tapatalk
@MidwestExpress what coefficient rate do you have for the 430 SS
Sent from the lab in my basement of vapement
Sent from the lab in my basement of vapement
#Dawn0810
.000138
Sent from my SM-G925V using Tapatalk
.000138
Sent from my SM-G925V using Tapatalk
Try 5-8 Strands of 32g, frame with 22 or 2 and wrap it in 40g...that should be a decent and interesting vape.I was thinking if taking 2 strands of 30g (Side by Side) and place a strip of .5 Ribbon above and below them and then flatten them together, then wrap it with 40g+ wire, I wonder if that would be any different...
@Dawn0810 I am ordering the RX200 in Black and giving it with the TFV4, I will be using the Aromamizer and Crius V3 until I order the 25mm VCMT...I wish the snow wolf was 30mm, I would order the 30mm VCMT for the bigger build deck/chamber.
Last edited:
CrazyChef
Custom Hand Crafted Coils - PureCoils.com
VU Vendor
VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
You could also do something similar to a build I post a while back. 30x40g cores (twisted), framed with 24g, then wrapped with either 32 or 40.
I had thought about that. Trap all sorts of flavor I would think!
Sent from my SM-G925V using Tapatalk
Thats the one I was thinking of, I think I saw it in your video... @ 0:30 and 1:31
CrazyChef
Custom Hand Crafted Coils - PureCoils.com
VU Vendor
VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
CrazyChef
Custom Hand Crafted Coils - PureCoils.com
VU Vendor
VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
On Steam Engine, 10x32K framed with 24K and wrapped with 44N would bring me in at 41.67 amps in a dual coil setup, 3mm ID, 7.5 wraps. 5.5 wraps, single coil would be 34.27 amps.
I have to use these on a parallel mech, because my iStick 100 won't go below 15Ω.
I have to use these on a parallel mech, because my iStick 100 won't go below 15Ω.
Ill do 10 x 30N80 Core, 22K Frame, 48N60 Wrap...sucks we cant compare each others build to see the differences and possible benefits
Should of Bought a Snow Wolf
(Lowest Firing Resistance is .05)
What is the reason I want to use the 24 to frame and not the 26 nichrome?
Sent from my Nexus 7 using Tapatalk
CrazyChef
Custom Hand Crafted Coils - PureCoils.com
VU Vendor
VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
Should of Bought a Snow Wolf
$$$$$$$$
$$$$$$$$
$$$$$$$$
On a side note... Ever since I started getting into building on a regular basis, I've been getting poked more times a day than a hooker during Mardi Gras!
CrazyChef
Custom Hand Crafted Coils - PureCoils.com
VU Vendor
VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
Size. On the one I'm gonna do, I think it'll fit better with the 32g. I'll find out in a few minutes.
I know I feel like Im diabetic...sometimes I forget to sweep and when grabbing something from my office without shoes on at night.....thats one way to jump completely awake! I once had a Staggerd Fused Clapton about 4mm into my big toe$$$$$$$$
$$$$$$$$
$$$$$$$$
On a side note... Ever since I started getting into building on a regular basis, I've been getting poked more times a day than a hooker during Mardi Gras!
BTW the SW V1.5 can be had for less then $90 at most places and Ive seen it down to 60 at others like Gearbest when on sale....Its one of the only devices I wouldnt ever get rid of because its simple, powerful, almost limitless and smexxi as fuck!
CrazyChef
Custom Hand Crafted Coils - PureCoils.com
VU Vendor
VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
Yes, but I'm on an extremely limited income right now. I got laid off until the springtime.
Im very sorry to hear that, I wish you the best...have you any tech or web skills? Degrees/Certification?
CrazyChef
Custom Hand Crafted Coils - PureCoils.com
VU Vendor
VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
Not really. Unemployment will cover the bills, but just barely. But i kinda like the extended vacation. I work a LOT of overtime from late spring through early fall. I would have put away some more money, but I discovered this thing called "vaping" and it has become a bit of an obsession. Poured most of my excess money into it.
I used to be big into salt water red tank systems. Has two 125 gallon tanks. One fish only, one reef. Then I went and bought a 240 gallon cube tank and the full setup on a Saturday... Went to work on Monday and fit laid off. I just about shut myself. I walked out got on my bike and cruised around the rest of the day and then went home and started selling all my extra fish tank stuff to offset my unemployment.Not really. Unemployment will cover the bills, but just barely. But i kinda like the extended vacation. I work a LOT of overtime from late spring through early fall. I would have put away some more money, but I discovered this thing called "vaping" and it has become a bit of an obsession. Poured most of my excess money into it.
So I know how a hobby can siphon the savings down!
Sent from my Nexus 7 using Tapatalk
I was going to say if you had any tech skills then I could easily get you in for Web Software Development (JavaScript/HTML5) or Intrusion Detection Analytics.Not really. Unemployment will cover the bills, but just barely. But i kinda like the extended vacation. I work a LOT of overtime from late spring through early fall. I would have put away some more money, but I discovered this thing called "vaping" and it has become a bit of an obsession. Poured most of my excess money into it.
If you can keep on without any outsider help then I commend you, its good to take a break once in a while and enjoy what you would be missing while working. I dont miss too much since I work in my home environment...same place Im typing here
I wouldnt be able to deal with being laid off...I would probably get bored and try to take down the place I was laid off from.
$$$$$$$$
$$$$$$$$
$$$$$$$$
On a side note... Ever since I started getting into building on a regular basis, I've been getting poked more times a day than a hooker during Mardi Gras!
I know how you feel. Worst one was when i dropped a bundle i was working on onto the carpet, couldnt see it so i ran my hand across the floor. I found it, embedded solidly in my finger damn near to the bone
Sent from my LG-H811 using Tapatalk
My order just shipped so keep an eye out for your 3ml versions to ship soon!
Ordered Thursday here today meanwhile the ones I ordered two weeks ago aren't here yet but I wanted these more anyways
Sent from the lab in my basement of vapement