Become a Patron!

Post your builds

MidwestExpress

Silver Contributor
Member For 4 Years
Size. On the one I'm gonna do, I think it'll fit better with the 32g. I'll find out in a few minutes.
With all those 40k cores, do I trust into one bundle or a bunch of small bundle? Twist them tight or just enough to hold them all together?

Sent from my Nexus 7 using Tapatalk
 

CrazyChef

Custom Hand Crafted Coils - PureCoils.com
VU Vendor
VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
With all those 40k cores, do I trust into one bundle or a bunch of small bundle?
One fairly solid bundle, unless you're going to flatten/hammer it. Then keep it a little loose, but still twist it enough to give it some body.
 

CrazyChef

Custom Hand Crafted Coils - PureCoils.com
VU Vendor
VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
Web Software Development (JavaScript/HTML5) or Intrusion Detection Analytics.
That would probably be within my realm of do-able abilities. I just don't have any hard core, in-depth programming abilities. As of right now, I think I have about 50 domains, have accounts on 4 or 5 different registrar sites, and have web hosting though HostGator (I don't recommend them). I'll probably be switching to SiteGround - not sure yet. Also have a developers license with Elegant Themes. I be lovin' me some WordPress web development. :D
 

CrazyChef

Custom Hand Crafted Coils - PureCoils.com
VU Vendor
VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
Okay, well the 10x32g framed with 24g, 44g wrap was a bust. Couldn't get more than an inch done until the three started bunching up - even after straightening and continuing.. I did get a good shot of what it looked like before it would bunch up, though:

DSC_0911.JPG
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
10 x 32N80 Core, 22K Frame, 42N60 Wrap
Turned out like shit when I coiled it becuase I couldnt see where the frames where after I wrapped it...Im sure it will vae the same either way....
20151221_204815.jpg20151221_204741.jpg 20151221_210614.jpg
I dont think Ill do much more of these types of wires. It consumes alot of wire, its a pain in the ass and lastly its a gamble when you go to coil it. It my just be me but I feel its more for people that can pull it off easier. I may be my drill but I can put shit like this in the chuck or it slips out constantly, even tightened down or spread to all 3 openings....I need a new drill...
 

blakemorder

Silver Contributor
Member For 4 Years
10 x 32N80 Core, 22K Frame, 42N60 Wrap
Turned out like shit when I coiled it becuase I couldnt see where the frames where after I wrapped it...Im sure it will vae the same either way....
View attachment 36260View attachment 36262 View attachment 36261
I dont think Ill do much more of these types of wires. It consumes alot of wire, its a pain in the ass and lastly its a gamble when you go to coil it. It my just be me but I feel its more for people that can pull it off easier. I may be my drill but I can put shit like this in the chuck or it slips out constantly, even tightened down or spread to all 3 openings....I need a new drill...
If your getting slipping try crimping your wires inside a butt connector then putting the connector in the chuck, no slipping and they lay flat.

Sent from my XT1095 using Tapatalk
 

Schmucko

Silver Contributor
Member For 4 Years
Got home from work, got a shower, took the wife to work and im like "Yeah! Time to build something amazing!" So i started with a 33k/40n fc. Boom,
be14027001bbe893d408d87976d4e020.jpg
. Got 5" done and my drill died.... what the hell do i do with this?

Sent from my LG-H811 using Tapatalk
 

Schmucko

Silver Contributor
Member For 4 Years
I have an aromamizer coming in... I literally only have a velocity right now. I could tuck it away for later or run another 5" strand tomorrow to play with or throw it on the ground and yell at it

Sent from my LG-H811 using Tapatalk
 

Schmucko

Silver Contributor
Member For 4 Years
Thats basically what i do at work when tools fail on me... But i am happy with the wrap on this build, short as it is. I ran maybe 2 or 3 degrees behind the head of the wrap instead of perpendicular but man its a bitch trying to not blink

Sent from my LG-H811 using Tapatalk
 

turnman34

Member For 4 Years
Angelcigs but I have it next to the authentic and the only thing that it different is on the authentic I word aromamizer Rdta is smaller than the clone but for 1/4 of the price I'll take it the ones I got today weren't supposed to be mailed out until Christmas day


Sent from the lab in my basement of vapement
Just ordered mine. Will be fun to mess with. Now to get some more wire!!!


Sent from my iPhone using Tapatalk
 

itsmenotyou

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
I'll get my flat wire today. Even if I have to go get it from the po
1d2e8744e0e74c0afd56bf721b1e0651.jpg

Side note. Usps tracking keeps getting worse eh?
sent from a dumb operated smartphone
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
The Crius was in the next town over yesterday, My aromamizers are laving their Origin Facility, and I just won a giveaway for a Target TC Tank with the Ceramic Coils (First Giveaway win@ VU). I will finally get to try Temp control and those new Ceramic coils I keep hearing people rave about all in one!

I use this to track my shipments on my PC and Phone, it kees them in a record so I dont have to type the tracking in everytime I want to see results, and you can edit the names:
https://m.usps.com/m/TrackConfirmAction
 
Last edited:

Dawn0810

Gold Contributor
Member For 4 Years
Member For 3 Years
The Crius was in the next town over yesterday, My womanizers are laving their Origin Facility, and I just won a giveaway for a Target TC Tank with the Ceramic Coils (First Giveaway win@ VU). I will finally get to try Temp control and those new Ceramic coils I keep hearing people rave about all in one!

I use this to track my shipments on my PC and Phone, it kees them in a record so I dont have to type the tracking in everytime I want to see results, and you can edit the names:
https://m.usps.com/m/TrackConfirmAction
You can buy a womanizer???? Lol


Sent from the lab in my basement of vapement
 

Dawn0810

Gold Contributor
Member For 4 Years
Member For 3 Years
I'm sad my vapemail has slowed down because of xmas good thing I bought a shit Ton of stuff before hand all I'm waiting on is my cube mini 2 crius v3 and 2 3ml aromamizers then it'll be business as usual


Sent from the lab in my basement of vapement
 

itsmenotyou

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Yes... But delivery is not too shabby. Once it hits sorting facility in my area i just assume its out for delivery

Sent from my LG-H811 using Tapatalk
My local po sucks. That's why it's blacked out. They like to loose packages. Including a package that had my $250 ar-15 barrel. The cocksuckers.


sent from a dumb operated smartphone
 

Dawn0810

Gold Contributor
Member For 4 Years
Member For 3 Years
My local po sucks. That's why it's blacked out. They like to loose packages. Including a package that had my $250 ar-15 barrel. The cocksuckers.


sent from a dumb operated smartphone
Oh HELL NO!!!!!!! I'd freak out


Sent from the lab in my basement of vapement
 

MidwestExpress

Silver Contributor
Member For 4 Years
Yes... But delivery is not too shabby. Once it hits sorting facility in my area i just assume its out for delivery

Sent from my LG-H811 using Tapatalk
It is that way for me at work. Definitely not like that at home... So I just have all my stuff sent to work. Easier that way. That and it isn't sitting on my front porch all day annnnd I get to play with stuff during the day so I can play with it more once I get home!

Sent from my Nexus 7 using Tapatalk
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
It is that way for me at work. Definitely not like that at home... So I just have all my stuff sent to work. Easier that way. That and it isn't sitting on my front porch all day annnnd I get to play with stuff during the day so I can play with it more once I get home!

Sent from my Nexus 7 using Tapatalk
My dumbass mailman just handed one of my presents being delivered to my kids while I went to the store, he saw me heading out and decided to hand it to kids (who know presents will be in it),
I hate the fact my mailman sucks, he has delivered my shit to people down the road (who were nice enough to call me) and other packages I haven't received (Missing...) when I was supposed to arrive days ago. He knocks every time he stops by and acts like he doesnt know what to do if no one answer, I told him to leave EVERY AND ALL PACKAGES on the backporch without knocking or anything, he has yet to do this. If he had kids how would he feel if I went to his house and gave his kids his presents before christmas?
 

Schmucko

Silver Contributor
Member For 4 Years
Including a package that had my $250 ar-15 barrel.


sent from a dumb operated smartphone
I hope you had insurance on that. They dont like to work without those.... But, if need be, i have an entire upper im trying to get rid of



Sent from my LG-H811 using Tapatalk
 

itsmenotyou

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
I hope you had insurance on that. They dont like to work without those.... But, if need be, i have an entire upper im trying to get rid of



Sent from my LG-H811 using Tapatalk
they dropped it off at my neighbors house. The little old lady was like "this ain't mine. Stupid ass mailman" I love old peoples.
10" 300 blackout barrel that a little old lady delivers. 'Murica

sent from a dumb operated smartphone
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
they dropped it off at my neighbors house. The little old lady was like "this ain't mine. Stupid ass mailman" I love old peoples.
10" 300 blackout barrel that a little old lady delivers. 'Murica

sent from a dumb operated smartphone
Make sure you bake her some goodies for christmas!!

The next upper I get for one of my AR's will be with a 7.5" BBL...just waiting on my papers to come back.
From the Other Thread...
Some of my Toys:
img_20150523_154429-jpg.33922
the-litter-jpg.33923
sr9c-2-jpg.33924
sd9-m-p-jpg.33925
sd9-3-jpg.33926
sd-m-p-jpg.33927
p250-1-jpg.33928
new-gun-pics-1-jpg.33929
m77-markii-2-jpg.33930
m-p10-4-jpg.33931
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
I got it last week and I haven't done a build without it lightningvapes.com has it for 36.99$ then 17% off with ohmsweetohm


Sent from the lab in my basement of vapement
I may end up getting the Geekvape or the Pilot Vapes Versions, if I can find it when it get my paycheck on sale I will get the authentic version...
GeekVape521 and Pilot Vapes 521
bc7e3d8eade36c78a26d2c4279604c4c.jpg
pilot-vape-super-ecig-tester-coil-master.jpg
 

Dawn0810

Gold Contributor
Member For 4 Years
Member For 3 Years
I may end up getting the Geekvape or the Pilot Vapes Versions, if I can find it when it get my paycheck on sale I will get the authentic version...
GeekVape521 and Pilot Vapes 521
bc7e3d8eade36c78a26d2c4279604c4c.jpg
pilot-vape-super-ecig-tester-coil-master.jpg
The first company that came out with them where charging 200$ for them. I love coil master everything I own of theirs from the coil jig to the three 10"x13" carrying case nothing has let me down I do like how those look tho


Sent from the lab in my basement of vapement
 

itsmenotyou

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Make sure you bake her some goodies for christmas!!

The next upper I get for one of my AR's will be with a 7.5" BBL...just waiting on my papers to come back.
From the Other Thread...
Some of my Toys:
img_20150523_154429-jpg.33922
the-litter-jpg.33923
sr9c-2-jpg.33924
sd9-m-p-jpg.33925
sd9-3-jpg.33926
sd-m-p-jpg.33927
p250-1-jpg.33928
new-gun-pics-1-jpg.33929
m77-markii-2-jpg.33930
m-p10-4-jpg.33931
Some purddy baby's there.
My next gun buy will be either a xd service model or a m&p comp in 45

sent from a dumb operated smartphone
ETA: is that a tokarev in the bed of the truck?
 

iLiptiKal

Bronze Contributor
Member For 4 Years
Had a hard time with installing this and getting decent photos today, but it vapes amazingly well so I thought I'd share it.

3x 28gN80, 36gN80 spaced alien 8 wrap
28gN80 parallel 9 wrap
On 2.5mm driver
0.13ohms


16f079593dea71a75d1bbf2f52c955ec.jpg

571d0bb1a4ee3d0485ec030df949a5e7.jpg



Sent from my iPhone using Tapatalk
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
@raymo2u
Love the ultra tatical sig! Is that the 250? You must've added more weight than the actual pistol

Sent from my LG-H811 using Tapatalk
Yea I got it when they first came out in 40S&W, I bought those extras off Ebay for fun...It was a joke on a survivalist pistol :cool:

Some purddy baby's there.
My next gun buy will be either a xd service model or a m&p comp in 45

sent from a dumb operated smartphone
ETA: is that a tokarev in the bed of the truck?
The Toky is a 22lr Replica, the SD is a fantastic pistol, I didnt like the XDM as much though, the Glock 43 is one of my favorite pistols to date (LOOK INTO IT!) My net buy will be in Febuary and it will be the Kimber Crimson Carry II Super.
 

Schmucko

Silver Contributor
Member For 4 Years
Yea I got it when they first came out in 40S&W, I bought those extras off Ebay for fun...It was a joke on a survivalist pistol :cool:


The Toky is a 22lr Replica, the SD is a fantastic pistol, I didnt like the XDM as much though, the Glock 43 is one of my favorite pistols to date (LOOK INTO IT!) My net buy will be in Febuary and it will be the Kimber Crimson Carry II Super.
Got the g26, love it and its my edc

Sent from my LG-H811 using Tapatalk
 

Oggy

Silver Contributor
Member For 4 Years
My edc is a G23 with a 9mm Stormlake barrel. So its more like a G19. Have been looking at G43 figure I will pick one up next summer so I dont print so bad.
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
My edc is a G23 with a 9mm Stormlake barrel. So its more like a G19. Have been looking at G43 figure I will pick one up next summer so I dont print so bad.
I was going to contact GlockWorx to see if they would do some custom barrel/slide porting and thread my barrel...some stippling possibly also, Cant have a stock pistol for too long...
Ive been tring to find a G17L and stick the slide on say a G26 frame...but I would need a cover for the gap from the trigger guard to the guide rod end...that would be a perfect carry gun. Barrel length is never a problem it just adds to accuracy, frame/grip size printing is the problem with concealed carry. Though open carry is allowed here. Shit besides Fed laws and being atleast 15 to BUY* a new firearm there isnt any other firearms laws here....why I loved VT when I moved here.

Thats a lot of power in a small frame.
Ive carried a STI Lawman 3.0 for 2 years...45APC +P+ in a 3" Bull Barrel 1911...that is a way to strengthen your wrist faster then anything else Ive tried
 
Last edited:

Schmucko

Silver Contributor
Member For 4 Years
8ddca2fed8f9bc0bb5f9e8a70815d0b9.jpg

Thinking of doing some micro fc dragons with that 33/40... Couldnt find a decent backdrop, will this do?

Sent from my LG-H811 using Tapatalk
 

Schmucko

Silver Contributor
Member For 4 Years
..
Ive been tring to find a G17L and stick the slide on say a G26 frame

You really only need the barrel. As long as the lug locks up properly, you can run a g17 or g19 barrel in a g26 frame. The shorter slide is inconsequential for an extra 1" - 1 1/4" of barrel

Sent from my LG-H811 using Tapatalk
 

VU Sponsors

Top