Hey, i included a coil build two posts ago to stay on topic...Hey, I just found this really cool thread in the Non-Vaping Related subforum. It's called "Gun Talk".
Well sight picture distance matters, unless its strictly for cqc and pocket shots but not the reason I wanted the slide assembly on the small frame. Think Detonics Streetmaster....You really only need the barrel. As long as the lug locks up properly, you can run a g17 or g19 barrel in a g26 frame. The shorter slide is inconsequential for an extra 1" - 1 1/4" of barrel
Sent from my LG-H811 using Tapatalk
I'm waiting for it come back in Stock at a few places. Supposed to get an email when it does. Can't wait for that email!I WANT THE 521!!!!!!!!!
Not too shabby. And, hell, if it works it works, right?First build with ribbon. Don't hide the ugly!
5x .4mm ribbon with 32 ga 3 mm 5 wrap came out at .50ohm for a single coil. Also. Holy flavor batman!
sent from a dumb operated smartphone
Only issue. It's to high ohm for my taste. To cool of a vape for my mutation xls massive deckNot too shabby. And, hell, if it works it works, right?
Sent from my LG-H811 using Tapatalk
Heaven? 6x33 kanthal 40 n80 outterWhat's inside the coil?
Just ordered mine!!!!I got it last week and I haven't done a build without it lightningvapes.com has it for 36.99$ then 17% off with ohmsweetohm
Sent from the lab in my basement of vapement
So it's a multi-strand alien?6x33 kanthal 40 n80 outter
Yes sir. Gonna take another run at it tomorrow and see if i cant clean it up and get another wrap in itSo it's a multi-strand alien?
28. I may do it on a 30 when i try it again but 28 worked greatWhat size did you wrap the initial Clapton around? I wanna try this.
I can't alien bro
Now this is ugly... If these aliens were to invade us, i would not be worried. 4 wraps on 3mm id .23 ohms
Sent from my LG-H811 using Tapatalk
Its a game of patience. I started with 3x26/30 and watched every tut on youtubeI can't alien bro
but I try lol
sent from a dumb operated smartphone
Im building the Crius V3 right now...just got it in the mail, my Aromamizers will be here tomorrow or the day after christmasI just did a simple 30g Ni200 build 12 wrapsand I have to say for 14$ this was a score
Sent from the lab in my basement of vapement
I love how you just tuck the cotton in the holes in the crius I tested all the aromamizers out just to make sure they where all good and so far no issuesIm building the Crius V3 right now...just got it in the mail, my Aromamizers will be here tomorrow or the day after christmas
How are the aromamizers? Are they on point?I love how you just tuck the cotton in the holes in the crius I tested all the aromamizers out just to make sure they where all good and so far no issues
Sent from the lab in my basement of vapement
I just did a simple 30g Ni200 build 12 wrapsand I have to say for 14$ this was a score
Sent from the lab in my basement of vapement
Gotta respect the condom...Snow Wolf Condom came also...
I wish they did the same thing as the Snow Wolf package has...Where the Wolf is Embossed it is Chrome...Then it would be Vibrant and look better but I understand why they didnt because its Silicone and flexible and it wouldnt hold up unless they made it cut completely through and have it backed with a Chromed hard plastic plate...Maybe a future project.Gotta respect the condom...
Sent from my LG-H811 using Tapatalk
I'm loving them if I didn't know the small little difference in the writing where is says aromamizer Rdta it's bigger on the clone but not by much I wouldn't know which was the authentic one besides the colorHow are the aromamizers? Are they on point?
Sent from my Nexus 7 using Tapatalk
Alright guys. Build time engaged.
Opinions though!!!
I'm coming off a 26GA N60 /// 34GA N80 Fused Clapton, with 26G staging wire. It was a 6 wrap. 2.3mm ID. In my mutation that is the only atty on hand able to fit it.
Love fused claptons, staging isn't the most necessary thing when running on a regulated device, but I do enjoy making them.
On hand I have a Mad Hatter Mini... A Mutation V3 (my first authentic atty, still strong) .... A Mutation XS (mini 4) .... And a Doge X2, the competition atty from Doge designed for "much clouds"
Wire?
20G Kanthal ........ 26G N60 ...... 28G Kanthal ...... 34G N80
What can I build! And for what! Taking opinions I could always repeat. Love the standard build I do with claptons.
Matt
Yeah. I completely effed it up.You ever get to that multi core alien? Wouldnt mind some feedback before i go at it again...
Everyone needs a velocity. I'm about to finally buy a second I think. Between that and a phenotype-l. ..Got the gf a velocity for Christmas and decided to build it up for her, just simple 26k/38n80 fused claptons. The build deck is pretty awesome though, I wish I'd have gotten myself one lol
Sent from my XT1095 using Tapatalk
I think I'm going to order a mini after Christmas. The phenotype is just a little pricey for me at the momentEveryone needs a velocity. I'm about to finally buy a second I think. Between that and a phenotype-l. ..
Sent from my SM-G925V using Tapatalk
I have a velocity mini from fast tech. Next one will be the better one by I think tobecco. I found a phenotype-l clone for $25 that I'm thinking about getting though. They even have a phenotype-l mini that I thought about getting for flavor comparison to the velocity. Wish I could find one sub $20. I would get a full size and a mini.I think I'm going to order a mini after Christmas. The phenotype is just a little pricey for me at the moment
Sent from my XT1095 using Tapatalk
Vaporbeast has the mini clones for 18 ish plus shipping, that's where I got hers. Other than being a little oily its real nice actually.I have a velocity mini from fast tech. Next one will be the better one by I think tobecco. I found a phenotype-l clone for $25 that I'm thinking about getting though. They even have a phenotype-l mini that I thought about getting for flavor comparison to the velocity. Wish I could find one sub $20. I would get a full size and a mini.
Sent from my SM-G925V using Tapatalk
What went wrong?Yeah. I completely effed it up.
When i did mine i wrapped the ends thru the clasp on the swivel and crimped them flat. Putting the other ends in the chuck i inadvertently left some slack in the outter strands and i think that outward push, so to speak, is actually what kept them flat. Not sure, i just spent 15 min trying to decore my 30/40 clapton for my next run. Gonna whip up some burgers to help fuel upcoming struggle to recreate what i apparently accidentally did last nightCouldn't keep the cores parallel. I'll try again soon.
I have the phenotype-l. It's easy to build for. I want to get a velocity also! Maybe when I win the lotto tonight I can get all I want!!!Everyone needs a velocity. I'm about to finally buy a second I think. Between that and a phenotype-l. ..
Sent from my SM-G925V using Tapatalk
It kinked somewhere while i was trying to back it off. Damn stuff is too small to see whats going on so i ended up just cutting it in half and pulling it off thru the middle. Did about 18" over all so im left with two decent lengths which should make it more manageableDo you run your drill in reverse to decore?
So my decored clapton started kinking while i was wrapping, checked to see if it snagged on something only to find the tail end was being attacked by my cat. I think im going to revisit this one after i get the hang of simple builds with this fine wireIt kinked somewhere while i was trying to back it off. Damn stuff is too small to see whats going on so i ended up just cutting it in half and pulling it off thru the middle. Did about 18" over all so im left with two decent lengths which should make it more manageable
Sent from my LG-H811 using Tapatalk