Become a Patron!

VapeVillian

Bronze Contributor
Member For 4 Years
Hey man! Got a question for you. I'm looking to build a coil that looks like a slinky. I have an idea for a certain build, but I can't seem to get the U shape of the coil to stay in place. Thanks m8.

Sent from my Nexus 7 using Tapatalk
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
Hey man! Got a question for you. I'm looking to build a coil that looks like a slinky. I have an idea for a certain build, but I can't seem to get the U shape of the coil to stay in place. Thanks m8.

Sent from my Nexus 7 using Tapatalk
You will need to get it to bend like that and you can use a torch to keep it angled like that....Or you could find a way to get it to stay like that until you can fire it...I havent done alot of the shaped coils but others have on the "Post your builds" thread
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
Ive never braided anything before...so a team member and I had a bet, If he could make a framed staple I would make a braid...He finally pulled one off and I took to learning about braiding.
First braid ever was a Alien Framed Staple Cored Slentre'

13739457_639511632891458_1433423737_n.jpg


Third Braid Ive ever done...Fishtail Braid:

20160729_113436.jpg 20160729_113818.jpg 20160729_113746.jpg 20160729_113903.jpg

Some Images of Todays Build....a Bit of Setup and WirePorn.

Wide CSSFC

SPECS: 25 x .3R/28N80/42N80/44N80


20160729_173033.jpg 20160729_182216.jpg 20160729_182756.jpg 20160729_182657.jpg 20160729_182627.jpg 20160729_182827.jpg
 

inspects

Squonkamaniac
Senior Moderator
VU Donator
Diamond Contributor
Member For 5 Years
Raymo....how many ohm are those coils?

Beautiful work as always...!
 

inspects

Squonkamaniac
Senior Moderator
VU Donator
Diamond Contributor
Member For 5 Years
Ray....I put two pair of your SS coils on Goons this morning...oh my, do they sing FLAVOR....absolutely love the coils...!

Those coils are by far the best flavor I've ever gotten from the juice I'm using. I cranked the power up to 140 watts, almost need an industrial fan in here.....:)
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
Ray....I put two pair of your SS coils on Goons this morning...oh my, do they sing FLAVOR....absolutely love the coils...!

Those coils are by far the best flavor I've ever gotten from the juice I'm using. I cranked the power up to 140 watts, almost need an industrial fan in here.....:)
Enough to get you Nic Sic on 3mg sometimes :D
 

inspects

Squonkamaniac
Senior Moderator
VU Donator
Diamond Contributor
Member For 5 Years
Those SS coils of yours are the cleanest tasting vape I've ever experienced.
 

inspects

Squonkamaniac
Senior Moderator
VU Donator
Diamond Contributor
Member For 5 Years
Didn't you say you use a high quality German made wire?
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
Didn't you say you use a high quality German made wire?
Sandvik Wire..Smelted in Sweden and Milled in the USA. When you buy premium it shouldnt mean your just buying the name, the experience and quality should also be on deck
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
You actually used the coil?....:giggle:

I'd frame it.....:)
I find these pretty easy to pump out compared to most other coils Ive done...the Fusing is time consuming though! If I made it with larger gauge Frames/Staggers/Fuse then I could make them much more quickly.
 

inspects

Squonkamaniac
Senior Moderator
VU Donator
Diamond Contributor
Member For 5 Years
I'm loving the hell out of your coils, replaced three attys with the SS, damn nice tasty coils.....:)
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
I'm loving the hell out of your coils, replaced three attys with the SS, damn nice tasty coils.....:)
Im really enjoying the SS myself, I was reluctant at first but when I made the first set of SS Aliens to use I was floored by their performance and have been using SS only since then! Im glad the SS wire is about the same quality as the Kanthal and N80 wire Ive been getting...last a very long time with very little degradation in almost 2 months of heavy use in my Tornado and now the Mage RTA...I think the Boreas has had the same set of Alien Framed Staples in it for almost 3-4 months now....
The only issue in making them for people to buy is people dont seem to need to order for a long while...maybe it wasnt the best route to host a "business" but it definitely makes the people that order them happy ;):D

20160725_130612.jpg20160522_155015.jpg 20160522_153458.jpg 20160526_104431.jpg
20160615_120911.jpg 20160615_121056.jpg
 

inspects

Squonkamaniac
Senior Moderator
VU Donator
Diamond Contributor
Member For 5 Years
I have about 50 attys, will be ordering more coils soon, when I figure out which coils I like the best.....:vapemail:

Not sure if there is such a best coil though.....:giggle:
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
I have about 50 attys, will be ordering more coils soon, when I figure out which coils I like the best.....:vapemail:

Not sure if there is such a best coil though.....:giggle:
I like Aliens, Framed Staples and Alien Framed Staples but Lately Ive been playing around with Cat Track Aliens in the Goon on Unregulated Box Mods...The quick ramp up and wide surface area give the vape I like and the resistance is kept high since its just a flattened Alien with thinner cores saves battery life....Im thinking this is a jack of all trades build because it checks every box!

20160720_121847.jpg 20160720_140118.jpg 20160416_144349.jpg 20160416_143919.jpg 20160411_114353.jpg
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
Got a G24 Seminole by Compvape and a El Diablo Anubis Mod Today and wanted to do something different then normal for it.
I should have done this for the Twisted Messes Squared but I had a build in it already so here they are...Aliens Squared!

SPECS: 3 x 26g 316L/.2x.2N80²

20160801_132159.jpg 20160801_132117.jpg 20160801_135811.jpg 20160801_134541.jpg 20160801_135252.jpg 20160801_135209.jpg 20160801_140036.jpg 20160801_135447.jpg 20160801_135932.jpg 20160801_135402(0).jpg
 

inspects

Squonkamaniac
Senior Moderator
VU Donator
Diamond Contributor
Member For 5 Years
Raymo, what ohm are those?...I'd like to try a few sets in my Goons.
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
Raymo, what ohm are those?...I'd like to try a few sets in my Goons.
The Square wire is pretty expensive bud....like twice the price of ribbon wire and I find ribbon wire over priced..With SS Cores it will be around .1 Dual Coil 26g Aliens. These would be in the same tier the Alien Framed Staples are in since Square wire isnt cheap and its difficult to get it to wrap perfectly on the initial clapton and then the alien itself..much like using 28g for a clapton wrap..I will have to pick more up as others said the same thing...I only bought 30ft of it to try myself :xD:
 

inspects

Squonkamaniac
Senior Moderator
VU Donator
Diamond Contributor
Member For 5 Years
That is a little low for my vaping...like to stay at about .20--.30.
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
Will they fit comfortably in a Goon?
Of Course ;) It would be similar in size to the Aliens youve recieved in the past, maybe slightly larger due to the outer wrap. The outer wrap itself will be larger as its slightly bigger then what I normally wrap aliens with, the ridges and girth of it should give some interesting properties for wicking and ramp up....I havent tried it myself yet...I wanted to make a second coil that matches perfectly but have them both at 5 wraps so I can use it on my new Anubis with some "Hot" results
 

inspects

Squonkamaniac
Senior Moderator
VU Donator
Diamond Contributor
Member For 5 Years
.....lol....please let me know how they work after testing, I'll send the sheckels.....:)
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
Out of all the square wire I had I finally made one single set of matching Squared Aliens with them...Im not sure if I will use them but I may sell them...Im still unsure. Its crazy that I only made 3 successful Aliens with over 50ft of wire...not an easy task let me tell you!

3 x 28g 316L/ .2 Square wire Aliens (5 Wraps/3mm ID)

20160804_100520.jpg

Corrugated Tsuka SSFC (Imperfect)
8 x .4R/ 28g 316L/.4R (6 wraps/3mm ID)


20160804_111952.jpg 20160804_111943.jpg 20160804_112008.jpg 20160804_112020.jpg 20160804_111544.jpg 20160804_111827.jpg
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
@raymo2u How do you space your staggers?
Beadalon Spool Tamers are how I stagger/Space my Clapton.

Clip to see it in action:
https://www.instagram.com/p/BISxozQBcbg/?taken-by=raymo_2_u

You can see it making the clapton but if you look close the clapton it perfectly spaced. Turning the Spool of center makes the space larger and the more its used the more the wire cuts a groove into the spool tamers feeder mouth, this creates a "preset stagger" and I just put it into the groove from there on out and the rest is done for you...

20160513_100222.jpg 20160513_100438.jpg 20160513_100212.jpg 20160513_100317.jpg 20160513_100354.jpg 20160513_100252.jpg
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
Raymo, have you vaped the Square wire Aliens yet?

If so, how do you like them compared to others?
I vaped the single coil...I havent decided on what will happen to the dual coil set I made..

The single coil isnt as violent in ramp up or heat as its normal counterpart, which I believe is from the extra mass of the outer wrap. It definitely helps with wicking and the cotton doesnt get burned as easy since the heat is slightly further away from the heat..overall its a great coil.

I am however loving these!! Another set of 50g Wrapped Framed Staples.
SPECS: 10 x 3R/28g 316L/50KD (5 Wraps/3mm ID @ .08)

20160806_174132.jpg 20160806_174431.jpg 20160806_174710.jpg 20160806_174647.jpg 20160806_175626.jpg 20160806_175739.jpg 20160806_175400.jpg 20160806_175734.jpg
 

inspects

Squonkamaniac
Senior Moderator
VU Donator
Diamond Contributor
Member For 5 Years
I vaped the single coil...I havent decided on what will happen to the dual coil set I made..

The single coil isnt as violent in ramp up or heat as its normal counterpart, which I believe is from the extra mass of the outer wrap. It definitely helps with wicking and the cotton doesnt get burned as easy since the heat is slightly further away from the heat..overall its a great coil.

I am however loving these!! Another set of 50g Wrapped Framed Staples.
SPECS: 10 x 3R/28g 316L/50KD (5 Wraps/3mm ID @ .08)

View attachment 58448 View attachment 58447 View attachment 58452 View attachment 58453 View attachment 58449 View attachment 58446 View attachment 58451 View attachment 58454
Wow....what an engineering marvel......:)
 

inspects

Squonkamaniac
Senior Moderator
VU Donator
Diamond Contributor
Member For 5 Years
I vaped the single coil...I havent decided on what will happen to the dual coil set I made..

The single coil isnt as violent in ramp up or heat as its normal counterpart, which I believe is from the extra mass of the outer wrap. It definitely helps with wicking and the cotton doesnt get burned as easy since the heat is slightly further away from the heat..overall its a great coil.

I am however loving these!! Another set of 50g Wrapped Framed Staples.
SPECS: 10 x 3R/28g 316L/50KD (5 Wraps/3mm ID @ .08)

View attachment 58448 View attachment 58447 View attachment 58452 View attachment 58453 View attachment 58449 View attachment 58446 View attachment 58451 View attachment 58454
Raymo, what atty is that pictured?
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
Wow....what an engineering marvel......:)
I do sit and wonder how the hell they make 50g+ wire time to time....Ive had 54g before and even breathing more then half of a inhale caused it to snap when wrapping it...it makes 50g seem easy to wrap ;) But due to the incredibly thin outerwrap it acts like a naked staple and ramps up quickly, due to the wide surface area and thin ribbon its a great vape for flavor and since its .3R its not as hot as .4R or .5R ...its a perfect vape on a unregulated parallel mod

RDA is a G24 Seminole Clone...I couldnt afford the Authentic but I love it all the same
 

inspects

Squonkamaniac
Senior Moderator
VU Donator
Diamond Contributor
Member For 5 Years
I do sit and wonder how the hell they make 50g+ wire time to time....Ive had 54g before and even breathing more then half of a inhale caused it to snap when wrapping it...it makes 50g seem easy to wrap ;) But due to the incredibly thin outerwrap it acts like a naked staple and ramps up quickly, due to the wide surface area and thin ribbon its a great vape for flavor and since its .3R its not as hot as .4R or .5R ...its a perfect vape on a unregulated parallel mod

RDA is a G24 Seminole Clone...I couldnt afford the Authentic but I love it all the same
Could I order about six of those coils?

If so, I'll hit your paypal tomorrow.
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
Thanks...I hit paypal in the morning....:confetti: I'm lazy tonight using the phone watching TV.....:crazy:

...................:vapemail:
Lol It may take a few hours to wrap it all so it'll give me time to make them ;) Even at 1800rpm inches of wire takes almost 20 minutes to clapton with it....it is well worth the time though, you will see!
 

inspects

Squonkamaniac
Senior Moderator
VU Donator
Diamond Contributor
Member For 5 Years
Confirmed! Will PM you your shipping info in the morning! I may send some other goodies for your "show off collection" also ;)
Thanks Ray...but I'm not in any hurry....take your time, it's nice not doing much on a Sunday once in a while.....:)
 

VU Sponsors

Top