Become a Patron!

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
How would I guess you may have done something like that?.......:giggle:

By the way, I ordered three Goons from 528 about a week ago and still haven't received them.
Yea they are a bit slow on getting them out....Mine didnt ship for almost 2 weeks for the first one, the second and third I bought from shops that had them in stock...You ordered the Ti Goon right? If you want to let one go I may have to make a sweet deal...
 

inspects

Squonkamaniac
Senior Moderator
VU Donator
Diamond Contributor
Member For 5 Years
Yea they are a bit slow on getting them out....Mine didnt ship for almost 2 weeks for the first one, the second and third I bought from shops that had them in stock...You ordered the Ti Goon right? If you want to let one go I may have to make a sweet deal...
I bought two TI and one SS. If they ever arrive, perhaps we could trade for some coils.
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
I bought two TI and one SS. If they ever arrive, perhaps we could trade for some coils.
I would trade a bit more then coils for a Ti Goon bud...Maybe a Twisted Messes Squared Loaded and a slew of coils?
 

inspects

Squonkamaniac
Senior Moderator
VU Donator
Diamond Contributor
Member For 5 Years
I haven't checked all the coils I already have you sent, if I'm not mistaken, you sent most in the .40-.45 range, correct?
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
I haven't checked all the coils I already have you sent, if I'm not mistaken, you sent most in the .40-.45 range, correct?
I dont remember to be honest...if they were for series then yes they would be in that range
 

inspects

Squonkamaniac
Senior Moderator
VU Donator
Diamond Contributor
Member For 5 Years
I would trade a bit more then coils for a Ti Goon bud...Maybe a Twisted Messes Squared Loaded and a slew of coils?
I haven't looked at the Twisted Messes atty yet, but I will.
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
I haven't looked at the Twisted Messes atty yet, but I will.
Were they the SS Claptons? If they were I think those were in the .2-.3 Range but you could mount the coils and then put it on a Mod to check the resistance to be sure.
 

inspects

Squonkamaniac
Senior Moderator
VU Donator
Diamond Contributor
Member For 5 Years
Were they the SS Claptons? If they were I think those were in the .2-.3 Range but you could mount the coils and then put it on a Mod to check the resistance to be sure.
I didn't get any SS coils from you yet.
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
I didn't get any SS coils from you yet.
Maybe I read something wrong in the last pm I saw from you then...Im not sure what you were sent as I cant find the PM for them....pages on pages of PM in just the last week makes digging difficult!
 

inspects

Squonkamaniac
Senior Moderator
VU Donator
Diamond Contributor
Member For 5 Years
I asked you about a week ago if you were making SS coils, on the forum, not in a PM...:)

You said yes, but I just didn't need any at the time. Hopefully when the Goons show up I'll order some.
 

Rhett1977

Bronze Contributor
Member For 4 Years
I haven't looked at the Twisted Messes atty yet, but I will.
The twisted messes and the twisted messes 2 are a builders dream. 3mm post holes, deep juice wells, shit they are awesome. I have 4 or 5 of them. They are my favorite attys and I have over 40 different ones. Check them out. They're damn nice!!
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
Sorry Guys...been a bit busy so I havent posted anything but here's some highlights of what Ive been working on..
"Baby Mohawk" Alien Framed Staples
Staggerton Variant
Stitched Alien Mohawk Framed Staple with Color Intricacy
Wire lot for AVS

8e14cc532ac0bbc8aa34d67b8f4ba594.jpg
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
Some stuff I made last night/tonight..

50g Framed Staple....I cried about 3 times in intervals before wrapping the coils....I didnt want it to explode like last time I tried it...
8 x .3R/28N80/50N80

In the backround is my Pinky's fingerprint....to show the detail of how small this damn wire is!!

a934931d23dc647c196e8cbcc37227c7.jpg
43dd01b419f28b195245a0d434d8e4e4.jpg


Im not done posting about this one yet so I dont have a "full bodied pic" of the coil up yet...
Staggerton Variant Staged with a Parallel Wrapped Clapton with Color Intricacy
SPECS: 8 x .4R/26N80/36N80/44KD

d3684aa541a8b9ccd73a9d22c5687589.jpg
235ce7dab4664757c700e324337b44d0.jpg


I dont see this much anymore...the Dragonskin Coil, I wanted to show it some color as well..
SPECS: 26KA1/34N80

815fee865ed81e7b15c8799b24ad9f85.png
d624e2bbc1ac8038efe9321687900105.jpg



In the Midst of reviewing the Tornado Nano RTA I decided my first build would be some SS Aliens....this thing has as much room as the Boreas to build on but is slightly taller then the Goblin Mini and has the Looks of the Mage RTA....I love it so far!
SPECS: 3 x 28g/38g

17f2e152ab96d73350347d0a6cf26d17.jpg


I hope that holds you guys over for a bit!
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
My phone wont attach to my computer since the USB port on the phone is getting old and its a Samsung which is a known issue...soo I will just be posting like I have recently until further notice...

Starting off like this...Again the 50g Framed Staple...I cant get over this build and its one of a handful from my IG that Ive actually vaped...

SPECS: 5 X .3/28N80/50N80

ff223e884c588fe5a0a9d5551717df8e.jpg
869287e9fb6b5a9ff52514d1ba445597.png


A High Guage SSFC
Thats a date on a Dime in the backround to show how small this wire is.

SPECS: 8 X .3R/28N80/40N80/48N80

e478a12d325b691f3df77a59c4265f39.jpg
d8e87119bc95259c5fdbcf705ee808d0.jpg
f215e64a4e995e9a14d251133a9eae47.jpg
29eb54a99c31a7bc0283b255642f64fe.jpg


A Basic SSFC

SPECS: 12 X .5R/26KA1/36N80/38N80

e71ca284dba4f132ea81b35d8c9bd1a3.jpg
12f3cee8675ea64c1238f06446aef05a.jpg
d6723b4b3305cde6491574cf7b5b2a5d.jpg


My First Zipper Coil!!

SPECS: 30g316L/40N80 and 32N8040N80

c2b11c01ab0637d01bf0dea2cef990e6.png
6fe9e4a8b087768e4fc3f6f0ff2ae009.jpg


DragonSkin Build

SPECS: 26KA1/34N80

2afc82adb8a30cd1a1307fba960d15ae.png
c68dd4c6e8e73f0b82ca968f7d366054.jpg
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
Next up is...

@Tom_Forde had a idea for a build that I should try and this is the result, I blame him entirely for this!

3 Different sizes of Ribbon and 3 Different sizes of Wrap. I call it the 3/3/3 Staggerton Variant.

SPECS: 6 X .5R/6 X. 4R/6 X .3R/28N80/36N80/40N80/42N80/46N80

48eccc02d6a7ffb735ac17582a439c54.jpg
e6b383560c1db1512a03826e4c023f5b.jpg
7802ded3c211a06f6796699c34f31061.jpg
a32b4fb16c7ce62830de34804410e72d.jpg



Groove Fused Claptons

SPECS: 26g 316L/36N80/48N80

0185537085b53788c92dc275587f14e3.png
08612473cb05ce2f1e8705fb8375d300.jpg
39b09fda8491531c7a0de7a2d04d4c38.jpg


A 5 core Groove Fused Clapton

SPECS: 26N80/36g 316L & 26g 316L/38g 316L with 46g Fusing them.

57587119caba013d63a8871ee4259132.png
31d6fc86648bddefe8a8822adceb87c3.png
d628336c4c9e21725a4e437755de0f83.jpg
 

Synphul

Gold Contributor
Member For 4 Years
That sucks about your drill dying. I can't believe nowhere had cordless drills. I'm in the midwest so maybe they're more common here? Not sure about auto parts stores but usually hardware stores have them. Especially the big box hardware stores like menards, lowes, home depot. I think lowes is where I picked up my makita set a few years ago, was like $179 or $199 - it was on sale for a decent price, came with 2 li-ion batteries, cordless drill, cordless impact and quick charger. Father's day sales are great for stuff like that.

I suppose the impact would spin some coils, though it would have to be paired with a chuck of some sort besides the standard quick release it uses for driver bits. The 2sp drill runs up to 1500rpm like yours, the driver runs up to 2300rpm. Although the 1420 in/lbs of torque may be a little overkill lmao.
 

gopher_byrd

Cranky Old Fart
VU Donator
Diamond Contributor
ECF Refugee
Member For 5 Years
VU Patreon
You sir are an artist!

The 3/3/3 Staggerton Variant kinda looks like a fret board or maybe a keyboard.

Me, I'm quite happy with my fused Claptons. I've made 2x26k/38N80, 2x26SS/38N80, 2x28k/38N80, and 2x30k/38N80. I made the 28 and 30 gauge Kanthal for my BF atties on my REOs. I didn't want to go too low on those. The 30 was for a BF Derringer as it has a small center post hole.

I just don't have the time or patience to practice making those works of art you and the other coil porn artists come up with. I'll just sit here and drool...
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
Today's Build...Staggered Staple Something Fused with Staged Heating...:D
Ive been trying my hand at editing the pictures but not trying to exaggerate or make it disproportional...bare with me! My phones camera is severly scratched up so all my pics are over exposed even with the exposure turned down, I use editing to fix that and make things more vibrant like how they are when seen with your eyes rather then looking through a fuzzy lens.

SPECS: 8 x .5R/3 x .4R/38KA1/40KD + 24g 316L SS

20160701_131249.jpg 20160701_133138.jpg 20160701_133131.jpg 20160701_133257.jpg 20160701_133236.jpg 20160701_133830.jpg 20160701_134123.jpg 20160701_133432.jpg 20160701_133421.jpg 20160701_133332.jpg
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
A Fused Staggered Staple/Clapton Variant.
This build was a pain in the ass to say the least...This is basically 2 Staggered Fused claptons with a Staple in the Center but its all Fused as one...the hard part was to get the fuse in right without and magnification.

Specs: 10 x .4R/26N80/38NKD/44KD (Single Coil - 4 Wraps/3.5mm ID @ .07 Ohms)


20160701_182832.jpg 20160701_182855.jpg 20160701_184727.jpg 20160701_191632.jpg 20160701_191529.jpg 20160701_191740.jpg 20160701_191658(0).jpg 20160701_191748.jpg 20160701_191740.jpg
 

Deucesjack

VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
I ordered some stainless steel clapton's from Raymo, can't wait to try them in a Goon.
Just be prepared to have them in a long time. I'm already over 3 months on mine with no sign of wear. Just dry burn them when you rewick and they last a long time. Best coils I ever had.

Sent from my SAMSUNG-SM-N915A using Tapatalk
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
Just be prepared to have them in a long time. I'm already over 3 months on mine with no sign of wear. Just dry burn them when you rewick and they last a long time. Best coils I ever had.

Sent from my SAMSUNG-SM-N915A using Tapatalk
You mean prepare to have them last a long time lol Most orders arrive within 2-3 days!
 

inspects

Squonkamaniac
Senior Moderator
VU Donator
Diamond Contributor
Member For 5 Years
Just be prepared to have them in a long time. I'm already over 3 months on mine with no sign of wear. Just dry burn them when you rewick and they last a long time. Best coils I ever had.

Sent from my SAMSUNG-SM-N915A using Tapatalk
Indeed...I'm still using the same set of coils I bought from Ray three months ago too...and have about 15 more pairs of kanthal-nichrome I haven't used yet.

I can tell a difference in taste between the kanthal and SS, the SS being MUCH better.
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
I didn't see that.....528 have them in stock?
They are being released after tonight!

Indeed...I'm still using the same set of coils I bought from Ray three months ago too...and have about 15 more pairs of kanthal-nichrome I haven't used yet.

I can tell a difference in taste between the kanthal and SS, the SS being MUCH better.
I actually love all three combined..like in my latest Alien Interlock Coils...
Ill be updating this thread tomorrow with a SLEW of new builds!

Here's those Interlocks I mentioned though!
KA1 Cores/N80+SS Wraps

20160721_154330.jpg 20160721_154434.jpg
 

inspects

Squonkamaniac
Senior Moderator
VU Donator
Diamond Contributor
Member For 5 Years
Take it easy Pimp Daddy. I meant be prepared to have them in the atty for a long time. Shipping is fast if anyone else took that the wrong way.

Sent from my SAMSUNG-SM-N915A using Tapatalk
Very fast shipping. Ordered Wednesday, got tracking today.
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
Its usually same day but it was a order at midnight and I went a bit overboard with what I sent :p:cool:
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
20160715_182010.jpg 20160715_184153.jpg 20160715_182712.jpg

Some Hybrids:

20160718_122745.jpg20160716_172841.jpg
20160716_191345.jpg

First Attempt at a 50g Alien Wrap...(No one has ever gone higher then 48g before....)

20160721_121052.jpg 20160721_121029.jpg 20160721_121400.jpg20160717_151627.jpg
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
44g Aliens:

20160721_153327.jpg 20160721_153506.jpg

Alien Monster Staggerton:

20160721_155255.jpg 20160721_155423.jpg

What I actually Vape! 2x24g 316L/42N80 Fused Claptons:

20160721_221807.jpg 20160721_223325.jpg
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
Damn, those are some wild ass coils......:bliss:
Those last coils are crazy wide....each wrap is larger then most coils Ive made for people ;) Each wrap is almost as wide as: a centerpost on a 4 post RDA, a 5 Wraps 28g/38g Alien coil, or a tri-parallel 28g coil...just to gain you some perspective :cool:
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
Thank god they invented the Goon...!

I can't think of any other atty which would hold the wire.
Ive been looking at the Norris RDA ;) Its basically a 30mm Goon that can also go postless with many options for airflow and more :cool: That may be the RDA coils start going into when they dont fit the Goon!
 

inspects

Squonkamaniac
Senior Moderator
VU Donator
Diamond Contributor
Member For 5 Years
Received an order of SS clapton coils from @raymo2u this afternoon...true works of art...almost hate to use them.....:giggle:

Being serious, they are the best coils I've ever seen besides what Ray posts....can't wait to coil a few attys next weekend,

Thanks again Raymo....beautiful coils, I'm truly astonished...:vapemail:.....:confetti::confetti:
 

Deucesjack

VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
Received an order of SS clapton coils from @raymo2u this afternoon...true works of art...almost hate to use them.....:giggle:

Being serious, they are the best coils I've ever seen besides what Ray posts....can't wait to coil a few attys next weekend,

Thanks again Raymo....beautiful coils, I'm truly astonished...:vapemail:.....:confetti::confetti:
Told ya.

Sent from my GT-N8013 using Tapatalk
 

inspects

Squonkamaniac
Senior Moderator
VU Donator
Diamond Contributor
Member For 5 Years
Told ya.

Sent from my GT-N8013 using Tapatalk
Jack...this ain't my first rodeo with Raymo...I still have a bunch of kanthal-nichrome coils I haven't used up yet....not sure if I ever will use them all. I've been using one set of coils for months, burn, wash, re-wick....still just like new, even using a strong magnifying glass I don't see a bit of deterioration whatsoever.
 

Deucesjack

VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
Jack...this ain't my first rodeo with Raymo...I still have a bunch of kanthal-nichrome coils I haven't used up yet....not sure if I ever will use them all. I've been using one set of coils for months, burn, wash, re-wick....still just like new, even using a strong magnifying glass I don't see a bit of deterioration whatsoever.
He's the man. Glad to hear you've ridden with the Pimp Daddy before. Lol.

Sent from my GT-N8013 using Tapatalk
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
High Gauge Half Corrugated SSFC

I wanted to try something like this out a while ago and it just fell on the back burner until today. I love thin staggering and fusing on these types of builds but without magnification it can be quite difficult to get it done and done right....but I went slow and made sure the strands lined up by using the light from leds and the reflection of that light on the strands, this is how I basically checked every wrap as the drill turned.
I made a second length but used a thicker fused to see how it would turn out, one is 44g fused and one is 42g fused.

SPECS:
16 x .4R/28N80/40KD/44KD (4 Wraps/3mm ID @ .06 Dual Coils/ .12 Single Coil)

20160727_122547.jpg 20160727_120514.jpg 20160727_141154.jpg 20160727_141133.jpg 20160727_141239.jpg 20160727_141226.jpg 20160727_123219.jpg 20160727_142700.jpg 20160727_143016(0).jpg 20160727_143042.jpg
 

VU Sponsors

Top