Raymo2u's Build Thread

[NatGasMan]

Ray, I put your ss fused Claptons, not the Aliens, in another one of my Boreas. Great job as always! Unfortunately, I can't comment too much on flavor as I was testing a new flavor I made. It was a Orange Bar from FW. I'm not a fan. It tastes like fucking orange that's for sure. But on a brighter note, the wife snatched my G2 and took a couple of draws and said yum, this is great! I told her to keep it.

 

[raymo2u]

Yes I have. As a mater of fact, I was about to install the new set from Ray in my Boreas.

Just might be some good stuff right there

 

[NatGasMan]

I'm amazed as always with these framed staples. You can't get much better flavor than these. Thanks so much Ray! Enjoying the hell out of them!

 

[raymo2u]

I'm amazed as always with these framed staples. You can't get much better flavor than these. Thanks so much Ray! Enjoying the hell out of them!

You think you cant get better then Framed Staples Next time Order some Alien Framed Staples!

 

[inspects]

Really nice, Ray...!

 

[raymo2u]

Something I just tossed together...it wasnt supposed to end like this. I was trying to make a Caged Coil but I failed and this is what was left after clipping the Cage. You can see places where the 44g is screwed up from the Cage wire I tried using moved it around and almost destroyed the build....I wish I took pics before trying to Cage it....it was a flawless build before it.

SPECS: 10 X .3R/26N80/40N80/44N80

 

[raymo2u]

Made this gargantuan thing this morning...I wanted to make some changes on that build I made yesterday and this is what I came up with.

SPECS: 5 x .5R/38KA1/8x .4R/28N80/42N80

 

[raymo2u]

I also made this for the Rafale X RDA for my new Piglet!!!

4 x .5N80R/26N80/48N80 Framed Staples (6 wraps/3mm ID @ [**.38 Ohms**])
**Due to using the Dead Post** Do NOT use a build like this on a Series Mod!!!

 

[inspects]

Looking good, Ray.....really good actually.....

 

[Ogvapez]

I also made this for the Rafale X RDA for my new Piglet!!!

4 x .5N80R/26N80/48N80 Framed Staples (6 wraps/3mm ID @ [**.38 Ohms**])
**Due to using the Dead Post** Do NOT use a build like this on a Series Mod!!!

View attachment 52764 View attachment 52765 View attachment 52760 View attachment 52761 View attachment 52763 View attachment 52762

Like a Boss!!

 

[raymo2u]

Something I made this morning and then I tried making it a Naked Corrugated Build

The spacing was perfect until I went and Wrapped the coils and then the edges rubbed and screwed it all up..so I thought going Naked would be cool...too bad I already burned through the colors before I made it naked...

SPECS: 6 x .4R/26KA1/(40N80*) (4 Wraps/3mm ID @ .1 Ohms)

 

[raymo2u]

Groove Fused Staggerton for Today!

SPECS: 10 x .4R/26N80/36N80/48N80

 

[raymo2u]

Framed Staple Cored Staggerton I made today and then a Length of a Triple Corrugated SSFC...
FSCS SPECS: 5 x .4R/26N80/38N80/6 x .3R/26N80/46N80
Triple CSSFC SPECS: 12 X .4R/26N80/38N80/40N80

 

[kwb19448]

WOW!!! What part of the country do u live in? I want to be your friend so maybe you can teach me some of what u know about building.

Sent from my SGH-M919 using Tapatalk

 

[raymo2u]

WOW!!! What part of the country do u live in? I want to be your friend so maybe you can teach me some of what u know about building.

Sent from my SGH-M919 using Tapatalk

Rutland, VT

 

[kwb19448]

Damnit. I live in OKC but am a truck driver. I run out west and nw most of the time. Damn the luck

Sent from my SGH-M919 using Tapatalk

 

[DED420]

Here's a couple of the beauties Ray sent me, pictures don't do them justice, but they're amazing!

 

[inspects]

Something I made this morning and then I tried making it a Naked Corrugated Build

The spacing was perfect until I went and Wrapped the coils and then the edges rubbed and screwed it all up..so I thought going Naked would be cool...too bad I already burned through the colors before I made it naked...

SPECS: 6 x .4R/26KA1/(40N80*) (4 Wraps/3mm ID @ .1 Ohms)

View attachment 52915 View attachment 52914 View attachment 52920 View attachment 52917 View attachment 52916 View attachment 52921 View attachment 52918 View attachment 52919

Now that is beyond wild...!

 

[inspects]

Here's a couple of the beauties Ray sent me, pictures don't do them justice, but they're amazing!

View attachment 53225 View attachment 53227
View attachment 53230 View attachment 53226 View attachment 53228 View attachment 53229

DED, I have a pile of um too....Raymo IS the "Coilman"....!

 

[inspects]

Framed Staple Cored Staggerton I made today and then a Length of a Triple Corrugated SSFC...
FSCS SPECS: 5 x .4R/26N80/38N80/6 x .3R/26N80/46N80
Triple CSSFC SPECS: 12 X .4R/26N80/38N80/40N80

View attachment 53163 View attachment 53165 View attachment 53166 View attachment 53164

Fucking crazy my friend.....!

 

[inspects]

Groove Fused Staggerton for Today!

SPECS: 10 x .4R/26N80/36N80/48N80

View attachment 53057 View attachment 53053 View attachment 53054 View attachment 53052 View attachment 53056 View attachment 53055

Picture PERFECT.....!!

Damn my man....you seem to be taking it to the next level on a daily basis.......

 

[inspects]

Raymo....I went a lil nuts a couple days ago....bought three more VT133's and another G2.

I'll be needing more coils for the higher wattage mods & attys I'm stockpiling.

You have anything YOU like in stock for the Goon?

 

[inspects]

Groove Fused Staggerton for Today!

SPECS: 10 x .4R/26N80/36N80/48N80

View attachment 53057 View attachment 53053 View attachment 53054 View attachment 53052 View attachment 53056 View attachment 53055

Ray...you have of these available?

 

[inspects]

One more silly question, have you had time to build any SS coils yet... ready to ship?

 

[raymo2u]

Ray...you have of these available?

I run them in single coil since the resistance is really low in dual coil but they are great in single coil due to the surface area being larger then most dual coils anyways....I could offer them but they take ALOT of wire and time..

One more silly question, have you had time to build any SS coils yet... ready to ship?

Ive been offering SS coils for a bit now, PM me when you need some!

 

[inspects]

I run them in single coil since the resistance is really low in dual coil but they are great in single coil due to the surface area being larger then most dual coils anyways....I could offer them but they take ALOT of wire and time..


Ive been offering SS coils for a bit now, PM me when you need some!

Will do Ray....thanks my friend...!!

 

[Boden]

Raymo, do you only do round coils or have you tried different shapes. The Radiator coils I started making recently are working quite a bit better than round. This one has the air restriction signature of a 2.5mm ID coil with the surface area of a ~4mm round coil. Inside dimensions 2.5mm x 5mm, basically wrapped and heat treated on two 2.5mm SS rods.

 

[raymo2u]

Raymo, do you only do round coils or have you tried different shapes. The Radiator coils I started making recently are working quite a bit better than round. This one has the air restriction signature of a 2.5mm ID coil with the surface area of a ~4mm round coil. Inside dimensions 2.5mm x 5mm, basically wrapped and heat treated on two 2.5mm SS rods.
View attachment 53265

Ive done them but I dont prefer them

 

[mach1ne]

hey man i see you got the shuriken rda. are you going to make a thread for your impressions/review?

 

[raymo2u]

hey man i see you got the shuriken rda. are you going to make a thread for your impressions/review?

I will soon yes....If you like 22mm and the Goon then you will love it.

 

[raymo2u]

I havent been posting my work here since my phone wont connect to my pc lately...so here's a bunch of builds that I did before my drill recently died....

All 316L CSSFC:


Staggerton build:


Copper Goon Build:


Petri V2 Framed Staple Build:


Tsunami 24 316L SS Aliens (32g/40g)


Petri V2 25PLY Staple:


Triple Corrugated SSFC:

 

[raymo2u]

Something I made this morning completely by hand...I get a new drill tonight!!

SPECS: 10 x .3R/28KA1/38N80/40N80

 

[raymo2u]

Asymmetrical Hybrid Coil...It wasnt what I intended this morning but I thought it looked cool enough to post...
Staggerton/Framed Staple/Alien Framed Staple Segments.

SPECS: 6 X .3R/28N80/38N80/40N80/6 X .3R/48N80/36N80 (5 Wraps/4mm ID @ .2 Ohms)

 

[Rhett1977]

Something I made this morning completely by hand...I get a new drill tonight!!

SPECS: 10 x .3R/28KA1/38N80/40N80

View attachment 53623 View attachment 53624

What kind of drill did you get?

 

[raymo2u]

What kind of drill did you get?

Yesterday after visiting every Hardware store and Auto Shop in the area (12/6), I was told that none of them carried Cordless drills! I was thinking "Are you shitting me?? Not one Store has a Drill??". I finally got to go to Home Depot and the timing couldnt of been better, they were having a Fathers Day sale and there were 4 choices that I had for brands that had drills on sale. I decided to get a Ryobi One+ Kit, it came with 2 18V Batteries and a Smart Quick Charger. It has 2 speed transmission with variable speeds through them and can get up to 1500rpm....which is 2 times faster then my previous drill. The only thing about the drill I didnt like is the Chuck....it had a Triangle opening in the center even when completely closed. I solved that using a paperclip loop between the teeth, I do have a Keyless Chuck Adapter on its way though to have a decent drill chuck to use.

Next tax time I plan on getting a RIGID Gen5 18V Brushless Drill....that would be really nice and about the best in the class that I need..

 

[Rhett1977]

Yesterday after visiting every Hardware store and Auto Shop in the area (12/6), I was told that none of them carried Cordless drills! I was thinking "Are you shitting me?? Not one Store has a Drill??". I finally got to go to Home Depot and the timing couldnt of been better, they were having a Fathers Day sale and there were 4 choices that I had for brands that had drills on sale. I decided to get a Ryobi One+ Kit, it came with 2 18V Batteries and a Smart Quick Charger. It has 2 speed transmission with variable speeds through them and can get up to 1500rpm....which is 2 times faster then my previous drill. The only thing about the drill I didnt like is the Chuck....it had a Triangle opening in the center even when completely closed. I solved that using a paperclip loop between the teeth, I do have a Keyless Chuck Adapter on its way though to have a decent drill chuck to use.

Next tax time I plan on getting a RIGID Gen5 18V Brushless Drill....that would be really nice and about the best in the class that I need..

View attachment 53802

The paper clip idea is genius!! All of my power tools are Ols Milwaukee except for one drill motor. When I was able to work most jobs used Dewalt so I bought Rigid because they're red and black and no one would think I was stealing their tools. That's what made me buy my first one. The guy at the store recommended it and it was the same price as Dewalt so I figured it was good. I had a Ryobi for a short time. Battery crapped out on me. Old Milwaukee just doesn't right. They have my forever business. That's for sure. I'm glad you got a new drill motor. And a faster one at that!!! Keep crankin out those beautiful coils my brother!

 

[raymo2u]

The paper clip idea is genius!! All of my power tools are Rigid except for one drill motor. When I was able to work most jobs used Dewalt so I bought Rigid because they're red and black and no one would think I was stealing their tools. That's what made me buy my first one. The guy at the store recommended it and it was the same price as Dewalt so I figured it was good. I had a Ryobi for a short time. Battery crapped out on me. Rigid just doesn't right. They have my forever business. That's for sure. I'm glad you got a new drill motor. And a faster one at that!!! Keep crankin out those beautiful coils my brother!

I would of gotten a Rigid but its was another $100 for it....I couldnt afford that even with the sale...the Ryobi isnt bad its alot better then the damn Black and Decker I was using!

Here's more builds from today I havent posted yet...Double Stacked SSFC Variants with Color Intricacy and a Goon with a Fused Clapton Fused Clapton

 

[Rhett1977]

Old Milwaukee just make the best damn tools I've found. I don't know what they do but it works. I can't believe you did all that work with a Walmart drill motor. Damn!!! I can only imagine what you can do with a good one now.

 

[raymo2u]

Rigid just make the best damn tools I've found. I don't know what they do but it works. I can't believe you did all that work with a Walmart drill motor. Damn!!! I can only imagine what you can do with a good one now.

Just wait until I have a decent chuck on the drill! I know with a smoother trigger and speed changes and 2 different transmissions, slower slowest speed and a faster top speed it should make it much better overall....I just got to get used to it and wait for the chuck piece to come in.

 

[Rhett1977]

I hate waiting on vape mail dammit!!!! It seems almost worth it to get overnight shipping. Even when you're order is $10 and the shipping is $30 lol

 

[inspects]

Just wait until I have a decent chuck on the drill! I know with a smoother trigger and speed changes and 2 different transmissions, slower slowest speed and a faster top speed it should make it much better overall....I just got to get used to it and wait for the chuck piece to come in.

Ray, I've never seen a chuck like you pictured....will the damn thing even hold a 1/8th drill bit?

Perhaps the macro shot makes it look wider than it really is, but comparing to the paperclip, I'm not sure.

 

[inspects]

I hate waiting on vape mail dammit!!!! It seems almost worth it to get overnight shipping. Even when you're order is $10 and the shipping is $30 lol

lmao......

 

[raymo2u]

Ray, I've never seen a chuck like you pictured....will the damn thing even hold a 1/8th drill bit?

Perhaps the macro shot makes it look wider than it really is, but comparing to the paperclip, I'm not sure.

Yea it will hold a 2mm bit just fine but its too open for some of the small wires and it wont let me keep them centered...I may try swapping the chucks of the drills since they both have the same allen screw/chuck design and hopefully they have be swapped....if not Ill have to wait for the Chuck Adapter to come and then I wont have any issues...

On each jaw there is a raised line that goes all the way inside...this is what grips the bits and not the jaws themselves..

 

[inspects]

Yea it will hold a 2mm bit just fine but its too open for some of the small wires and it wont let me keep them centered...I may try swapping the chucks of the drills since they both have the same allen screw/chuck design and hopefully they have be swapped....if not Ill have to wait for the Chuck Adapter to come and then I wont have any issues...

On each jaw there is a raised line that goes all the way inside...this is what grips the bits and not the jaws themselves..

Ah...I see, or rather understand now...guess the macro just makes it appear much larger.

By the way. Do you have the link where you bought the macro lens for the Galaxy? Sorry if I asked before, I can't seem to find it if I did ask you.

 

[raymo2u]

Ah...I see, or rather understand now...guess the macro just makes it appear much larger.

By the way. Do you have the link where you bought the macro lens for the Galaxy? Sorry if I asked before, I can't seem to find it if I did ask you.

Here's a better kit then what I have...I may grab one similar to this next: LINK

 

[inspects]

Here's a better kit then what I have...I may grab one similar to this next: LINK

Holy moly, that is cheap as hell...thanks my friend...!

Macro and wide angle...unreal...!

 

[inspects]

How you like the Petri V2?

I love the damn atty....bought four.

 

[inspects]

I drilled out one of the Petri top caps, thought I might be sacrificing one, but it's perfect to my liking. Just a hair bigger, made it perfect providing a lil more air to some of those bigger coils I received from you.....

 

[raymo2u]

How you like the Petri V2?

I love the damn atty....bought four.

I loved it and then I drilled out a second pair of holes into the stock cap and now I wish I used a much smaller bit....I may grab a few clones so I can get the caps from them (stock and cloud cap) but I liked it when I first got it.

 

[inspects]

I loved it and then I drilled out a second pair of holes into the stock cap and now I wish I used a much smaller bit....I may grab a few clones so I can get the caps from them (stock and cloud cap) but I liked it when I first got it.

How would I guess you may have done something like that?.......

By the way, I ordered three Goons from 528 about a week ago and still haven't received them.