Squonkers are Bonkers

[zakumadness]

Still trying to find the best flavor build for my authentic hadaly on my coppervape.

Any suggestions from the squonk masters?

Open to any wire suggestions. I'm typically a DL vaper but open to MTL if it rocks on it

 

[JuicyLucy]

For what it's worth, I like a simple build when topping a mech like the CV

What kinda wire you have on hand?

 

[BrewBear]

Hey @JuicyLucy , have you taken a look at Billet boxes?

 

[JuicyLucy]

Hey @JuicyLucy , have you taken a look at Billet boxes?

Yeah, decided a long time ago: not for me

They are kinda slick though, and supposed to be built like a tractor

 

[RonJS]

On another note how long does shipping take from fasttech?
@

Depends on where you are having it delivered.

Anywhere near this guy?

 

[BrewBear]

Yeah, decided a long time ago: not for me

They are kinda slick though, and supposed to be built like a tractor

May I ask why? It looks interesting, sort of the all-in-one without the removable tank.

 

[JuicyLucy]

May I ask why? It looks interesting, sort of the all-in-one without the removable tank.

Eh, trying to find the RBA for it, very difficult and don't like prebuilt coils that come with the it stock

Plus, when I see that price, I see missing out on quality squonking, lol

EDIT: I'm not against it at all - a great choice for a lot of people

 

[BrewBear]

Eh, trying to find the RBA for it, very difficult and don't like prebuilt coils that come with the it stock

Plus, when I see that price, I see missing out on quality squonking, lol

EDIT: I'm not against it at all - a great choice for a lot of people

SXK got in the game, @dre just completed a second group buy for the DNA 40 ones though they have another version with different chip at 70w. They also made a Exocet clone for it. I'm not a fan of the DNA chip in general but a 60w or 75w would get my attention. If it had a FSK chip in it....

 

[JuicyLucy]

Oh yeah I saw that… Like I said, not for me. Plus, I'm on buying diet again… LOL


Sent from my iPhone using Tapatalk

 

[BrewBear]

Oh yeah I saw that… Like I said, not for me. Plus, I'm on buying diet again… LOL


Sent from my iPhone using Tapatalk

I'm on a buying diet too....and I'm famished

 

[JuicyLucy]

Haha. Diets are cruel and typically lead to failure in the end


Sent from my iPhone using Tapatalk

 

[Train]

Anyone got one of the Svapiamo plastic boxes?
They're available and not pricey - does the Fat Daddy 510 keep them from being popular?

(these are 2 different models, actually, but they're like $65 + shipping...)

 

[DogMan]

Anyone got one of the Svapiamo plastic boxes?
They're available and not pricey - does the Fat Daddy 510 keep them from being popular?
View attachment 79001View attachment 79002
(these are 2 different models, actually, but they're like $65 + shipping...)

quite popular here in aus about a year ago

apparently go okay

 

[ResIpsa]

Hello everyone, hope everyone is good. I pulled the trigger on an authentic Hadaly from Element Vapes and I'm wondering wether it's better for flavor with the coil up high or down low? Atty should be here tomorrow and I'm really excited to have an authentic!!
Thanks

I received my Therion BF and authentic Hadaly from Element Vape yesterday. Awesome combo.

Personally I just keep the forming rod for the coil in line and touching the sides of the atty body. This gives me the correct coil height in the Hadaly.

Chris

 

[Wicked Gene]

Still trying to find the best flavor build for my authentic hadaly on my coppervape.

Any suggestions from the squonk masters?

Open to any wire suggestions. I'm typically a DL vaper but open to MTL if it rocks on it

I use some twisted 26g SS, about 5 or 6 wraps comes out around .2 ohm
That is my go to build for just about everything.


Sent from my iPhone using Tapatalk Pro

 

[ResIpsa]

Still trying to find the best flavor build for my authentic hadaly on my coppervape.

Any suggestions from the squonk masters?

Open to any wire suggestions. I'm typically a DL vaper but open to MTL if it rocks on it

I've tried simple single coils up to claptons in my Hadaly clones on Coppervapes. I've settled on a parallel build: 2.5mm coil with 26 gauge SS, 6 wraps in contact=.25 ohms. If you do the parallel be sure that both leads are solidly clamped under each clamp. If a lead is loose it will cause problems.

The flavor for me is as good as the clapton coils and last longer between changes.

Chris

 

[SirVtHondaGuy08]

I use some twisted 26g SS, about 5 or 6 wraps comes out around .2 ohm
That is my go to build for just about everything.


Sent from my iPhone using Tapatalk Pro

That's my same setup as of lately, it's producing nice flavor and clouds with the hadaly.


Sent from my iPhone using Tapatalk

 

[BrewBear]

Anyone got one of the Svapiamo plastic boxes?
They're available and not pricey - does the Fat Daddy 510 keep them from being popular?
View attachment 79001View attachment 79002
(these are 2 different models, actually, but they're like $65 + shipping...)

I was looking at them (the site), actually looking at the box for the eVic VT mini but I'm not a fan of side squonk hole.

 

[zakumadness]

For what it's worth, I like a simple build when topping a mech like the CV

What kinda wire you have on hand?

On hand:
Kanthal a1. 22,24,28 gauges
Some ni80
26/32 Clapton
(Also have some alien, tiger, fused Clapton for non mech)

 

[gopher_byrd]

I build my CVs with Hadalys with a SS fused Clapton 28/38 @ 0.4 Ohms with the coil legs on top. Wonderful flavor and reasonable clouds. Not gonna win any cloud comps, but that is not what this setup is for...

 

[all_thumbs]

Don't think this was mentioned yet, but there is now a clone at FT of the NoNameMods Plug-in RDA. 20mm single coil with two airflow options, one of which looks like a 1mm hole for MTL. I almost bought the authentic of this but it sold out from most places.
https://www.fasttech.com/p/7362900

 

[BrewBear]

Don't think this was mentioned yet, but there is now a clone at FT of the NoNameMods Plug-in RDA. 20mm single coil with two airflow options, one of which looks like a 1mm hole for MTL. I almost bought the authentic of this but it sold out from most places.
https://www.fasttech.com/p/7362900

Saw that, not too sure of the plastic contraption directing air flow. The authentic might be a good PET plastic, the chinese.......

 

[JuicyLucy]

Don't think this was mentioned yet, but there is now a clone at FT of the NoNameMods Plug-in RDA. 20mm single coil with two airflow options, one of which looks like a 1mm hole for MTL. I almost bought the authentic of this but it sold out from most places.
https://www.fasttech.com/p/7362900

I bit on the 14mm version they also have....

Still hasn't shipped from last week, or last weekend I think it was

 

[all_thumbs]

It is supposed to be PEK insulator material on the authentic.

 

[JuicyLucy]

FT claims it's peek insulator - I'm just still on a quest to get a decent number of under 18mm atties

 

[USMCotaku]

Or Shift, or Hadaly or Druga or.....

Hadaly, definitely Hadaly

 

[BrewBear]

Hadaly, definitely Hadaly

Is there a slight chance you like the Hadaly?

 

[Briandesimone]

Hadaly is a forbidden word until USPS decides to deliver it

Sent from my SM-S120VL using Tapatalk

 

[BrewBear]

FT claims it's peek insulator - I'm just still on a quest to get a decent number of under 18mm atties

I ordered the Speed Revolution from 2F but there is a slight delay for me since their CS rep is getting a 510 pin insulator for the Origen little.

 

[USMCotaku]

Is there a slight chance you like the Hadaly?

put it this way....I generally like an open, airy dtl....but with the flavor, and ease of build on the Hadaly, I don't care that it's a tad restricted dtl

 

[KentA]

Or Shift, or Hadaly or Druga or.....

I'm really getting off on the SXK Shift. No leaks, great flavor, easy to coil, but there must be a learning curve to putting the alignment peg in the tiny hole in the base when replacing the cap. If I don't learn the trick soon, I'll yank out the Dremel & bevel that damned hole.

 

[Danimal77]

Just bought a pearless today. Let me tell you this thing is awesome got it on my dripbox and its kicking major ass. Good flavor and vapor. Highly recommend it

 

[USMCotaku]

http://www.3fvape.com/rebuildable-a...mizer-gold-brass-glass-22mm-diameter-3ml.html

rumor is, this one comes with a squonk pin, so I may be trying it out, looks a bit like the Hadaly with larger air flow.....I need a better topper for my inbox (hadaly has a permanent home on my brass CC).

 

[USMCotaku]

Just bought a pearless today. Let me tell you this thing is awesome got it on my dripbox and its kicking major ass. Good flavor and vapor. Highly recommend it

I kinda want to try one of those, like the post design.

 

[Danimal77]

I kinda want to try one of those, like the post design.

Post design is really cool. Easy to build on big juice well. You can fit all kinds ofd bulls on here

 

[Danimal77]

Builds*

 

[Danimal77]

Here is the build I'm using

 

[Danimal77]

Really like the post design. Easy to build on can fit some big builds on here

 

[USMCotaku]

another one I would like to try is the nopity, love how the posts are on the outside on that one

 

[Danimal77]

Haven't heard of that one

 

[BrandonRawks]

another one I would like to try is the nopity, love how the posts are on the outside on that one

I'm not sure if you'd like that one. Airflow is *TIGHT*.

 

[USMCotaku]

http://www.3fvape.com/rebuildable-a...silver-316-stainless-steel-22mm-diameter.html

sold out everywhere I have checked.

 

[USMCotaku]

I'm not sure if you'd like that one. Airflow is *TIGHT*.

looks like it has more airflow then the hadaly, and I am liking that, just have to remember not to build as low as I normally would, or the vape can get a tad warm

 

[USMCotaku]

and the nopity has a second top cap with extra side airflow

 

[BrandonRawks]

looks like it has more airflow then the hadaly, and I am liking that, just have to remember not to build as low as I normally would, or the vape can get a tad warm

With the 'cloud cap', it opens up quite a bit, but loses a lot of flavor. I'm not really a fan. With the normal cap, I think it's much less than the Hadaly and too restrictive for me, especially with a dual coil build. The NoLegal though, with the same deck, is super, super tight. That one makes the Hadaly feel wiiiiiide open.

 

[USMCotaku]

Still trying to find the best flavor build for my authentic hadaly on my coppervape.

Any suggestions from the squonk masters?

Open to any wire suggestions. I'm typically a DL vaper but open to MTL if it rocks on it

my hadaly build........

3 strands of 26 gaugle kanthal, twisted, then hammered flat. Love it for flavor.

 

[USMCotaku]

With the 'cloud cap', it opens up quite a bit, but loses a lot of flavor. I'm not really a fan. With the normal cap, I think it's much less than the Hadaly and too restrictive for me, especially with a dual coil build. The NoLegal though, with the same deck, is super, super tight. That one makes the Hadaly feel wiiiiiide open.

It's all academic at this point....haven't been able to find one

 

[BrewBear]

FT claims it's peek insulator - I'm just still on a quest to get a decent number of under 18mm atties

Did you see this one?

 

[JuicyLucy]

Did you see this one?

Yeah, I ordered one

 

[ResIpsa]

http://www.3fvape.com/rebuildable-a...mizer-gold-brass-glass-22mm-diameter-3ml.html

rumor is, this one comes with a squonk pin, so I may be trying it out, looks a bit like the Hadaly with larger air flow.....I need a better topper for my inbox (hadaly has a permanent home on my brass CC).

I have one of those on it's way from 2fdeal. Will report in when I try it.

Chris