I am scared to death of mech's, don't want one.
Become a Patron!
Squonkers are Bonkers
- Thread starter DogMan
- Start date
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
If I was a bear, I'd go to FT and get one of those Derringers in a brass finish to top the brass CV
One is my pinch from pdib. Cleaned it yesterday, got it firing. Dropped it two feet onto carpet this morning and needs maintenance again. Switches are internal on 99% of mods for a reason.
Less than half price reflects no service available for VR. And seeped juice in 510 of pinch.
Sent from my LG-H815 using Tapatalk
Unreal, Dan....paid DAMN good money too.
Jasen (DJ) told me to ship my VR mods to him, said he could make the mods work respectively.
I wish they made the Origen little in brass to match the brass CV I'm ordering
With all the silver. Performance is good for a 26650. Just wrong grade of silver, so contacts slip, and battery changes resemble brain surgery getting everything aligned
Sent from my LG-H815 using Tapatalk
You got that right, I get so frustrated I want to scream....!
That magnet idea has to be one of the dumbest things I've ever seen....!
Not much. Mostly plastic.
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
You people are a bunch of enabling trouble makers!!! I'm loving it!
JL, That DT loos nice too! I'll get my glass/lampwork gear setup eventually, then I'll be able to make some nice top caps and DTs but till then, I'm stuck with what's available on the market.
JL, That DT loos nice too! I'll get my glass/lampwork gear setup eventually, then I'll be able to make some nice top caps and DTs but till then, I'm stuck with what's available on the market.
Good idea - brass/brass is nice...
This is there cuz it's my brassiest atty...
Derringer is a great plan. Or something with an Ultem cap...but I think bear said he wasn't loving the Hadaly...
This is there cuz it's my brassiest atty...
Derringer is a great plan. Or something with an Ultem cap...but I think bear said he wasn't loving the Hadaly...
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Been on a Modfather tizzy for a few weeks.....Was wondering why you don't drop in here much anymore
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Been on a Modfather tizzy for a few weeks.....
I've seen that, lol
Really love the ModFather, but have been on a squonk binge of epic proportions
I always have at least four squonkers loaded at all times.....I've seen that, lol
Really love the ModFather, but have been on a squonk binge of epic proportions
modfather rob?Been on a Modfather tizzy for a few weeks.....
what is a tizzy in relation to rob? here it is similar to hissy fit
Modfather Inc. 30mm tanks....flavor like a dripper, clouds like a smoldering bonfire.
good rda those derringer v3s
The Derringer is a damn good flavor atty...!
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Clone Haladay or real one?
oh
quite a few old time squonkers are going to the newer tanks
you haven't jumped on this "regulated" garbage have you?
I have an assortment of mods, no real favs.oh
quite a few old time squonkers are going to the newer tanks
you haven't jumped on this "regulated" garbage have you?
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Understatement of the year, lol
From memory, the positive contact has a slightly raised base. That's the only downside not being flush. And the broad posts.
Feeds a parallel Z coil without dramas though. Unsure on duals
Sent from my LG-H815 using Tapatalk
A little grinding on the pin and all is well
If the Hadaly doesn't work out for ya out I've got a ss Derringer v3 squonk ready with a FD pin not being used, just let me know.
That sound good, thank you. Please give until the end of the week. I feel the top of my Hadaly is not seating all the way down on the base, I will swap the o-rings and see. The other problem might be the inside or the cap, it has a very sharp lip and might benefit from some very light polishing.
Has anyone here tried the NONAME type attyes? I'm tempted, but I'd like a couple of impressions from the folks around here.
I think I wet sanded the inside edge you refer to with some 220 wet sand paper.
I do that on several attys, make the cap go down so much smoother.
Aslo lube up your orings with a bit of PG on a qtip.
I just use a scrap of black 220 wet sand paper. Dampen it and use my finger about 5 min is all you need. Does a much more even job than a dremel or such. You just have to round off the inner edge a tiny bit.I did lube the o-rings but the cap is still giving me a headacheI have some very nice extra fine jeweler's polishing disks but they're at the old house and I'm still moving....
Sounds good @The Cromwell , thank you.
YW imho all attys with snug fitting caps need this treatment.
Makes it much smoother and orings last longer.
Take as long as you need, it's not going anywhere. I've thought about having a lot sale or start my on reality show spinoff of atty hoarders but both sound like to much trouble.
My Hadaly was very tight and took some effort to get it completely seated at first, I never noticed any sharp edges though. It seems to have loosened up a little over time, I just make sure I have the O-rings lubed well with juice. If changing the O-rings doesn't work a lite spin with some med-fine grit sandpaper should do it.
I've got 2 NONAME clones. The NoPity which is a great atty but its a dual coil, I'm more into single so haven't used it much. I got a NoToy in yesterday and so far I'm really liking it, lots of airflow choices and very easy to build on for a small diameter atty.
Last edited:
I looked at my sandpaper and it is 320 grit.
I bought a NoPity clone from FT awhile back and did not like it.Crap quality and not easy to build.I do have an authentic NoFear though,and the build quality is stellar.If you like MTL,the NoFear is great.It's a 14mm atty for single coil and a tight draw,and has great flavor.But I don't think they were ever cloned and they are pricey little bastards.
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Out of curiosity, have you actually been able to vape it?
i have a brass and copper v2 derringer from chowder..the way back vape machine...lol.
the derringer on the CV is the brass one(was 35$ just for the cap when it was new),the other 2 just sitting on the CV are extra caps i have.i also have an extra LE-86 bf'd atty(really bad pic,but vapes pretty good,from 3-F vape) and have had some decent results with it.crappy pics but i have crappy camera to boot.lot better pic in the link.
http://www.3fvape.com/rebuildable-a...ainless-steel-24mm-diameter.html#.WHVkIdIrJDU
Attachments
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
NIce - I have an old V1. I bought a brass clone to top it, but have never used it. The V1 has more than a few problems and being as there are non-problematic atties that put out great flavor without the problems, it just sits there.
Don't have a V3 clone, but they are supposed to be pretty good.
Ya gotta have brass topping brass - SS cheapens the look of a brass mod in my humble opinion
I just got home, I'm still moving, I had a chance to clean up the inner bottom lip so that at least now the cap sits flush on the base. I'll give it a shot this evening and let you all know how it went.
Hank F. Spankman
Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Hank F. Spankman
Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Also, notice that is a 24mm Goon on the CV. 22mm on the Pico