Become a Patron!

Squonkers are Bonkers

DogMan

VU Donator
Diamond Contributor
Member For 5 Years
Internet out for a week :tantrum:

4412dcda6da6e3ed4bad17ad3972a2f9.jpg
 

troydestroy

Silver Contributor
Member For 4 Years
And you think right! I'm trying to find the Berserker RDA and the Vandy Vape Galaxies RDA in one place and order both at the same time! So far, Vaporl is the only place showing the Berserker.
I'd stay clear of vaporl... Had a bad experience with them and had to PayPal chargeback them to get any response.

I did see both are listed at 3fvape this morning. They also have some caps for the Galaxy.
 

jasonandsarah

Gold Contributor
Member For 3 Years
What material and where did you have it printed? Does it seem sturdy and not like it would shatter if looked at wrong?
I printed it and it's a resin, not sure of the exact resin but it's weird because it's normally pretty strong but this mods so thin that I'm iffy about it lol

Sent from my SM-G955U using Tapatalk
 

ben73

Gold Contributor
Member For 4 Years
Maybe a frontal/edge squonker next...Please!
Would need to buy as a solid mod , then cut own hole , i did find these now on ebay , but Shipping to UK cost more than the mod box eck , plus ebay import tax , so will give a miss on them also very nice , maybe send the guy your own bought stab block next to mill ,

Sent from my ONEPLUS A3003 using Tapatalk
 

jasonandsarah

Gold Contributor
Member For 3 Years
Would need to buy as a solid mod , then cut own hole , i did find these now on ebay , but Shipping to UK cost more than the mod box eck , plus ebay import tax , so will give a miss on them also very nice , maybe send the guy your own bought stab block next to mill ,

Sent from my ONEPLUS A3003 using Tapatalk
I'm thinking about getting one of those diy mills. I've read a lot about them and I guess there really nice once you get them calibrated. Plenty big enough to mill out a mod

Sent from my SM-G955U using Tapatalk
 

ben73

Gold Contributor
Member For 4 Years
Some assembly required. Man I'm happy this turned out as nice as it did. Thanks for all the compliments through this process. Can't wait to squonk this thing
83c522519d59e52c424c471227b76925.jpg


Sent from my Nexus 6P using Tapatalk
Sliver 510 an contact strips would go very nicely in there , looks really good ,

Sent from my ONEPLUS A3003 using Tapatalk
 

ben73

Gold Contributor
Member For 4 Years
I'm thinking about getting one of those diy mills. I've read a lot about them and I guess there really nice once you get them calibrated. Plenty big enough to mill out a mod

Sent from my SM-G955U using Tapatalk
Ive looked them my self too , would love to get into building my own an milling but not cheap for any sort of good one either way , but cross vice an Dremel also works although not what youd call precise , but works , seen a video on YouTube of him making a box similar with a cross vice and dremel , since its hand turning will take some time too ,


Sent from my ONEPLUS A3003 using Tapatalk
 

ben73

Gold Contributor
Member For 4 Years
Ive looked them my self too , would love to get into building my own an milling but not cheap for any sort of good one either way , but cross vice an Dremel also works although not what youd call precise , but works , seen a video on YouTube of him making a box similar with a cross vice and dremel , since its hand turning will take some time too ,


Sent from my ONEPLUS A3003 using Tapatalk
Thus is something id try being a cheap skate , not got 1k for a decent diy milling station , but have the parts for this

Sent from my ONEPLUS A3003 using Tapatalk
Suppose would be ok for cutting out a board space then use a face plate , can drill 2 hole one for bat tube one for bottle for a front sqounker , and make a regulated wood sqounker
 

MrMeowgi

The Vapin' Drummer
VU Donator
Diamond Contributor
Member For 4 Years
Sliver 510 an contact strips would go very nicely in there , looks really good ,

Sent from my ONEPLUS A3003 using Tapatalk
I've got silver plated copper contacts on the way. And mm 510 with large silver contact. It hits like Mike Tyson now. I'm just really happy it works. Always nice to do something new.

Sent from my Nexus 6P using Tapatalk
 

MrMeowgi

The Vapin' Drummer
VU Donator
Diamond Contributor
Member For 4 Years
Would need to buy as a solid mod , then cut own hole , i did find these now on ebay , but Shipping to UK cost more than the mod box eck , plus ebay import tax , so will give a miss on them also very nice , maybe send the guy your own bought stab block next to mill ,

Sent from my ONEPLUS A3003 using Tapatalk
Damn that shipping sucks. I've got two items from the UK. One from ups is stuck somewhere 30 minutes away when transferred to post office. The other made it to the 30 minutes depot away from New York customs then shipped back to New York and now is still on the way back to destination for the last 4 days. When it only took 30 hours the first time.

Sent from my Nexus 6P using Tapatalk
 

jasonandsarah

Gold Contributor
Member For 3 Years
Thus is something id try being a cheap skate , not got 1k for a decent diy milling station , but have the parts for this

Sent from my ONEPLUS A3003 using Tapatalk
Suppose would be ok for cutting out a board space then use a face plate , can drill 2 hole one for bat tube one for bottle for a front sqounker , and make a regulated wood sqounker
This is what I'm talking about. Pretty much the prefect working area for a mod. https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/322415844316

Sent from my SM-G955U using Tapatalk
 

derrickfosgate

Gold Contributor
Member For 4 Years
Okay so wtf do i do now i got my mod from the clown was suppose to be well not this piss color and the spares was suppose to be cut to a black button and bottle no white shit any where well this is what i got ahh this idiot
d1d31a6fda106f706202c0d5f2900b19.jpg


Sent from my SM-G950U using Tapatalk
 

MrMeowgi

The Vapin' Drummer
VU Donator
Diamond Contributor
Member For 4 Years
Okay so wtf do i do now i got my mod from the clown was suppose to be well not this piss color and the spares was suppose to be cut to a black button and bottle no white shit any where well this is what i got ahh this idiot
d1d31a6fda106f706202c0d5f2900b19.jpg


Sent from my SM-G950U using Tapatalk
Ahh man that's some BS. Is that the giveaway mod?or were you in the group buy with everyone else

Sent from my Nexus 6P using Tapatalk
 

~Don~

Platinum Contributor
Member For 5 Years
Okay so wtf do i do now i got my mod from the clown was suppose to be well not this piss color and the spares was suppose to be cut to a black button and bottle no white shit any where well this is what i got ahh this idiot
d1d31a6fda106f706202c0d5f2900b19.jpg


Sent from my SM-G950U using Tapatalk

My goodness
 

derrickfosgate

Gold Contributor
Member For 4 Years
@derrickfosgate

I would make a post on the 67 main page... be like..

This is awesome! After the long wait...the anxiety and finally take delivery.... its everything I thought it would be!


View attachment 105333












Except for its not BLACK with Black bits...


Ok who's the color blind mofo who packaged my mod? lol
Yea im so using this

Sent from my SM-G950U using Tapatalk
 

~Don~

Platinum Contributor
Member For 5 Years
Yea im so using this

Sent from my SM-G950U using Tapatalk

I am sorry broheem... truly..I will say I am tearing up over this whole fiasco you pictured above... not laughing at you seriously...laughing more of the sarcastic meme I made lol
 

chohan

Silver Contributor
Member For 4 Years
Okay so wtf do i do now i got my mod from the clown was suppose to be well not this piss color and the spares was suppose to be cut to a black button and bottle no white shit any where well this is what i got ahh this idiot
d1d31a6fda106f706202c0d5f2900b19.jpg


Sent from my SM-G950U using Tapatalk

Man oh man... smdh:(
 

~Don~

Platinum Contributor
Member For 5 Years
I'd honestly go as far as just tagging Raphy... post that meme and a picture of your mod package lol
 

derrickfosgate

Gold Contributor
Member For 4 Years
I am sorry broheem... truly..I will say I am tearing up over this whole fiasco you pictured above... not laughing at you seriously...laughing more of the sarcastic meme I made lol
If i liked ultem it would be a okay but fack i hate it

Sent from my SM-G950U using Tapatalk
 

jasonandsarah

Gold Contributor
Member For 3 Years
Okay so wtf do i do now i got my mod from the clown was suppose to be well not this piss color and the spares was suppose to be cut to a black button and bottle no white shit any where well this is what i got ahh this idiot
d1d31a6fda106f706202c0d5f2900b19.jpg


Sent from my SM-G950U using Tapatalk
Maybe he'll let you send that one to me since he's never gonna ship me a mod! Lol

Sent from my SM-G955U using Tapatalk
 

~Don~

Platinum Contributor
Member For 5 Years
I really dislike FedEx though and UPS...both have a hub about 15m from me, so deliveries are always end of day
 

derrickfosgate

Gold Contributor
Member For 4 Years
I'd honestly go as far as just tagging Raphy... post that meme and a picture of your mod package lol
I got this from ralph


You didn't complète the gdoc when it was asked choice between black metal spares and SS. Unfortunatly and really sorry but this is exactly what you have ordered

Sent from my SM-G950U using Tapatalk
 

jasonandsarah

Gold Contributor
Member For 3 Years
If i liked ultem it would be a okay but fack i hate it

Sent from my SM-G950U using Tapatalk
Keep me posted because now that I'm thinking about it Ionce he agrees to replace your mod I might ask him if I can pay for the difference since its already over here lol. Plus I like ultem

Sent from my SM-G955U using Tapatalk
 

jasonandsarah

Gold Contributor
Member For 3 Years
I got this from ralph


You didn't complète the gdoc when it was asked choice between black metal spares and SS. Unfortunatly and really sorry but this is exactly what you have ordered

Sent from my SM-G950U using Tapatalk
What a fuckin dick

Sent from my SM-G955U using Tapatalk
 

MrMeowgi

The Vapin' Drummer
VU Donator
Diamond Contributor
Member For 4 Years
Rubber bands will get you till you get magnet.

Sent from my LG-D850 using Tapatalk
That's probably what I'll end up doing. Hell the guy at USPS said looks like the package is going return to sender but no I'm not sure. The door was at a standstill for almost a week then today it was a surprise

Sent from my Nexus 6P using Tapatalk
 

VU Sponsors

Top