mate offered me a loan, since i rarely end up liking mods that i covetThe palm dna75 is my favorite squonk mod... with the pico being second.
I’d really like to nab one again... second hand though... can find them in the sub $180 once in a while.
Lowest Being $150
Sent from my iPad using Tapatalk
There's one in the hardware classifieds. Lol!I really miss mine... and you’re making me want another
To me it was the best fit in the hand mod, more than enough capacity, battery capacity, and truly worked in TC.
Mine was exactly as yours minus the atty, I mostly used it with a Le Concorde... but it was a delight... although if I still had mine, we could be twins... I’d slap the Stumpy on
Man I really want another... time to hunt
Sent from my iPhone using Tapatalk
There's one in the hardware classifieds. Lol!
This has been the only set up I've used for a few months now. Just can't seem to put it down. Krönig 18650 w/ B2K rsa. Running a 27x4/40 fused clapton, all nichrome.
View attachment 164378
Kronig's on my "want" list...This has been the only set up I've used for a few months now. Just can't seem to put it down. Krönig 18650 w/ B2K rsa. Running a 27x4/40 fused clapton, all nichrome.
View attachment 164378
The only other mod I plan to buy is a 21700 version. Their website is the best place to watch but they are OOS on the 21s, and last I checked one 18650 left.Kronig's on my "want" list...
Apparently I need to try the build you are using, because I was far less than thrilled with my B2K. I was shocked by that, too. Expected much more.
I can't replicate yours exactly, but I do have tri-core Clapton wire, so I'll try that. Thanks for the info.
I wick like that in le Concorde bit of wick under it too just leave a small channel for air to come in hit go under over coil then out tip helps from over bottom feeding and leaks tooCoil placement is key. That and I wick it differently than most. I build two "walls" of rayon with the tails, to block off all airflow except for around the coil. I set my coil about ~2mm above the squonk pin (5mm leg length on the coil leg tools) so that the airflow is as direct as it can be. I get best results with 3mm ID or bigger. I sometimes run a tri core clapton wrapped in parallel, since this thing likes long coils.
Not the best pic, but you can see my wicking method. It helped the flavor production for me.
View attachment 164390
I came really close to getting that RDA, but only walked away with a bottle and a battery adapter. I cheaped out.Got a new toy, at 40% off 4th sale.
Had a blue one, so I knew - very nice finishing, satiny, huge bottle. First time trying their RDA - it's kind of a loud whoosh, but excellent flavor, nice squonk, nice deck. Might want to fiddle a fatter drip tip onto it though... Anyway, matchy-matchy, lol.
View attachment 164644
Man I love some dotmod. So classyGot a new toy, at 40% off 4th sale.
Had a blue one, so I knew - very nice finishing, satiny, huge bottle. First time trying their RDA - it's kind of a loud whoosh, but excellent flavor, nice squonk, nice deck. Might want to fiddle a fatter drip tip onto it though... Anyway, matchy-matchy, lol.
View attachment 164644
matchy-matchy
how much?
how much?
I really need to get this one back up and running. Just need a new 510.
Sent from a pile of wood chips
All hail sonarI really need to get this one back up and running. Just need a new 510.
Sent from a pile of wood chips
Yea replying to my own shit. Lol. Fiddled with it last night and the 510 was just loose. Just need some tubing now to fit the gap because the bottle isn't that tall. It's a wide mod so probably just for home life. But glad I got it workingI really need to get this one back up and running. Just need a new 510.
Sent from a pile of wood chips
My biggest worry is that I vape left handed.Was finally going to vape the Kimech that's been stashed forever - and couldn't find it
breathI have a question for you long time Squonkers. What do you use to clean out the squonk pin/tube from previous flavor?
I have a question for you long time Squonkers. What do you use to clean out the squonk pin/tube from previous flavor?
I've done the vinegar thing, even let it sit a while. Water definitely didn't do it. I haven't purchased alcohol in a really long time, but I suppose I could pick up one of those airplane bottle sized ones. Some juices are super stubborn.I keep some vodka in a squirt bottle for cleaning all my vapes, but I just squirt some into the hole and through the tubing when needed - I don't see why you couldn't do this with water, though a super strong flavor might linger with just h20
Vinegar might work if you don't wanna use vodka, but it would need a real good water rinse
I solved the problem... sort of...my way was to have a mod/atty for each flavor. I have three mixes I vape 99% of the time but depending on your gear, that can still get costly. I use the Odis 16mm (thank you @JuicyLucy for the suggestion ) on Pico squeeze (2 of them) and a Supersonic on a Topside Lite. For the times I don't squonk, I'm stuck on Dvarw tanks on several TC mods. On festive days and holidays I take out one of the Studiovape mods (thank you @DogMan for pointing me to this excellent mod) with a Nuppin topper or a Chalice III (and yes, I do have three mods and three Nuppins/Chalice III for them).I've done the vinegar thing, even let it sit a while. Water definitely didn't do it. I haven't purchased alcohol in a really long time, but I suppose I could pick up one of those airplane bottle sized ones. Some juices are super stubborn.
Thanks!
I've done the vinegar thing, even let it sit a while. Water definitely didn't do it. I haven't purchased alcohol in a really long time, but I suppose I could pick up one of those airplane bottle sized ones. Some juices are super stubborn.
Thanks!
Ultrasonic cleaner plus the type of sodium percarbonate that is commonly used by beer brewing hobbyists to clean brewing installations, and then finally rinse it off thoroughly with regular tap water. I use this cleaning technique on everything that comes into contact with juice, but usually I just rinse with sparkling water because it goes faster, if the previous flavor is not the kind that strongly lingers─it depends.I have a question for you long time Squonkers. What do you use to clean out the squonk pin/tube from previous flavor?
Finally received shipping notice.
we seem to still lack an "agree" reaction, but thisOnce we were able to get inexpensive soft bottles, unless it's proprietary, I would just use a new bottle rather than take a lot of time and expense trying to get something out of the OG
I always avoided strong or staining juices in setups with expensive bottles like cappies
It's been kinda going in spurts lately.Some days there will be 4-5 new posts,then nothing for a week or more.I'd say there are a lot browsing it still though,a few days ago i was looking through some listings and the thing at the bottom said there were 35 people viewing that section.Anyone been to ECF classies lately? Looked anemic and dead
I've done the vinegar thing, even let it sit a while. Water definitely didn't do it. I haven't purchased alcohol in a really long time, but I suppose I could pick up one of those airplane bottle sized ones. Some juices are super stubborn.
Thanks!
Returned to sender and marked as Dangerous Goods ?Finally received shipping notice.
Can't like that oneReturned to sender and marked as Dangerous Goods