and here they are
...I still have tonight and the morning so there may be some changes or adjustments made but so far...
Become a Patron!
The BOREAS RTA by Augvape and Roxy
- Thread starter VapeRN
- Start date
...I still have tonight and the morning so there may be some changes or adjustments made but so far...
...It may be a bit, I wont offer things I cant make perfect...Im not happy with some the coils I just made for inspects so I may end up remaking a few of them. I dont like things going out that I personally wouldnt post as coilporn.
Inspects will be the first person to get a pair of Corrugated coils from me...I havent even tried them yet...
Last edited:
So what's the overall consensus on the whole tilted post thing? I email sts and they said they might have replacement decks by end of next week, am wondering if I should go ahead and use this one in the meantime or just put it aside and use the larger deck? Of the 4 decks between my black and stainless this is the only one that is tilted. Thoughts?
A few people have had decks like that.
As long as the insulator looks intact. Go for it until you get the new deck.
If you get janky ohm readings don't vape on it.
roxynoodle
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
ECF Refugee
Yeah, I would use it. Just curious...loosen the 510 pin and see if you can straighten it and tighten it back down.
Gave it a shot but it didn't change. Built some coils on it and it seems to be holding steady around .19 (fluctuates a bit from .18 to .19 on my 521 tab). By janky ohm readings I'm assuming more movement than that yes? Gonna vape it till sts can send a replacement. Also have both the larger decks if need be.
While here, one other question regarding the inner juice flow ring. If I understand correctly there are two different sized holes, however I can't for the life of me figure out any size difference between the pairs? Is one set wider or longer?
The inner ring is supposed to have different sized holes, but I never found a difference on either of my tanks.
Mine is like that, but it works fine.
Can't wait to try them, Ray....It may be a bit, I wont offer things I cant make perfect...Im not happy with some the coils I just made for inspects so I may end up remaking a few of them. I dont like things going out that I personally wouldnt post as coilporn.
Inspects will be the first person to get a pair of Corrugated coils from me...I havent even tried them yet...
I checked the mail this evening, my clapton coils arrived from VapeNW yesterday, I'll try them tomorrow. They certainly don't have any coil porn worthiness though...
The juice ring on mine have the same size slots on it. When you're putting the tank together make sure you have the slots lined up as it can move and have a cross section in the path of the juice.
roxynoodle
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
ECF Refugee
I'm convinced the juice slots are the same size, too. I don't actually know why the final one has 4 instead of 2.
That does look very good, I may have to get a black Boreas just for that look.Oh I love to mix and match, now ready to fill and Vape.
Also crossing fingers for a gold Boreas to be released. A black and gold mix would really be sexy!
Sent from my Nexus 6 using Tapatalk
Yeah, love how easy the AFC ring is to swap, really takes it up a notch.
On the black top cap I'm actually using the drip tip from my Bellus. I like the Silver top of it.
Sent from my Nexus 6 using Tapatalk
I changed the o-rings for the decks. I realized why they were broken in the box, and maybe some others have too. They used the wrong size.
It wasn't even close. They used the o-ring for the chimney section, where it meets the top piece above the glass.
It's thicker and much smaller diameter. I have no idea how they even stretched it far enough to get in the grooves.
Anyway, hopefully they have stopped that nonsense. The deck is also a bit tighter to push in and pull out with the thicker one in there. Just slightly.
Sent from my iPhone using Tapatalk
It wasn't even close. They used the o-ring for the chimney section, where it meets the top piece above the glass.
It's thicker and much smaller diameter. I have no idea how they even stretched it far enough to get in the grooves.
Anyway, hopefully they have stopped that nonsense. The deck is also a bit tighter to push in and pull out with the thicker one in there. Just slightly.
Sent from my iPhone using Tapatalk
roxynoodle
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
ECF Refugee
They tell me it won't be a problem anymore.
Ur design was 2 big holes?
I have a tiled post deck as well and it works fine. I think they just goofed on some of them. It's not hurting anything by my nit pickedness. I don't want to go through the whole customer service and all that stuff since it isn't hurting anything as I said. It's not 100% perfect but oh well.
I love the boreas. I'm very close to selling my BFT to a friend who wants it just so I can buy a second Boreas. It's not as wide open as the bft and it doesn't produce as much vapor as the bft but dog gone it is close and the vape is so good. A nice warm saturated vape everytime. I'm so impressed the this RTA.
I love the boreas. I'm very close to selling my BFT to a friend who wants it just so I can buy a second Boreas. It's not as wide open as the bft and it doesn't produce as much vapor as the bft but dog gone it is close and the vape is so good. A nice warm saturated vape everytime. I'm so impressed the this RTA.
Ditto...looks really nice...!
Have you guys seen this
Sych RDTA
http://vapingunderground.com/index.php?threads/Sych-RDTA.223276/
VAPE IT
Sych RDTA
http://vapingunderground.com/index.php?threads/Sych-RDTA.223276/
VAPE IT
roxynoodle
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
ECF Refugee
Yep, just two. The prototypes only have two.
Damn!!
roxynoodle
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
ECF Refugee
Have you guys seen this
Sych RDTA
http://vapingunderground.com/index.php?threads/Sych-RDTA.223276/
VAPE IT
Hmm.
Right? BORALIS? LOL..
I really enjoy the NO DRY HIT aspect of the Boreas......
roxynoodle
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
ECF Refugee
BOREAS is BAD,
I sold my MUTANKS, don't get me wrong I love my MUTANKS, but I hate to see them COLLECT DUST, they deserve to be use
The Griffin got me off the RDAS, I appreciate its service but it's time for them to go,I'm done with tiny tanks
MOONSHIT,, please!!!
VAPE IT
I sold my MUTANKS, don't get me wrong I love my MUTANKS, but I hate to see them COLLECT DUST, they deserve to be use
The Griffin got me off the RDAS, I appreciate its service but it's time for them to go,I'm done with tiny tanks
MOONSHIT,, please!!!
VAPE IT
Right! I just let it rest on the deck like a dripper. I don't put cotton under my coils much if at all. No leaks, no dry hits. Even 90w and it's fine.I really enjoy the NO DRY HIT aspect of the Boreas......
roxynoodle
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
ECF Refugee
Yes, it's 22mm, single coil. Very different from Boreas
Same here...the only thing I had to change was my nic content....wow...that RTA will provide a wild nic rush if your not careful....
never had a problem with varitube 510 my last 3 mods have them .
well I think they are to busy right now . not even one word about it . or when to expect at least some info.
ordered another batchelor .
22? WHYYYYYYYYYYYYY
roxynoodle
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
ECF Refugee
roxynoodle
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
ECF Refugee
Single coil tanks don't need huge decks, do they?
Why not?
roxynoodle
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
ECF Refugee
Some peeps have single coil on the BOREAS?
VAPE IT
True. I guess I have a different vision for Merlin. A tank that can satisfy both tootle puffers and those who lung hit.
roxynoodle
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
ECF Refugee
We are actually working on it right now. We just took a break to eat though. And earlier Leon had a meeting.
Mikhail Naumov
VU Donator
Gold Contributor
Member For 3 Years
Member For 2 Years
ECF Refugee
Unlisted Vendor
BY NO MEANS AM I SAYING I BELIEVE THIS MAN'S CLAIMS.
Someone just sent me this on Reddit.
"Hey man, just read your reply, very nice! I'm one of the Beta Testers for the Supreme and the tank you tested is actually the fourth design. When BJ first sought out to design a new creation, one of the engineers quit Steam Crave and went to another company. Right when we were working on the third design, the Boreas was released. A couple of members of Steam Crave, whom we were working with, told us the story, and how it was almost a direct reproduction of the first design. We were all in shock, but not surprised. But that's ok.... like I said in my post, there's a reason why it was scrapped.... and one video reviewer showed the reason, unbeknownst to him.... it leaks. The Supreme is a result of a grand effort.... Steam Crave's customers..... what you hold in your hand is what I affectionately call "the people's atty"..... customers talked, Steam Crave listened, and eight testers with various backgrounds scrutinized it to the final product.... And even now, after the production release, the testers are STILL hard at it.... The Supreme is truly a "labour of love"..... I'm not worried about the Boreas, water (or e-liquid) seeks it's own level..... The Boreas, the Hastur and the Bellus can all sit quietly in a room together..... the Supreme reigns supreme, it has an army backing it.... ;-)
Cheers!"
I've seen the leaked steamcrave design with my own two eyes and I'm not shocked at how 'similar' it ISN'T to the Boreas. My Boreas doesn't even leak, and this guy kinda seems like a butthurt fanboy and he's full of shit. This was a PM to my reddit account in response to a comment I made stating I did not believe Roxy stole her design. Roxy, I have no idea why people are all uppity over this.
Someone just sent me this on Reddit.
"Hey man, just read your reply, very nice! I'm one of the Beta Testers for the Supreme and the tank you tested is actually the fourth design. When BJ first sought out to design a new creation, one of the engineers quit Steam Crave and went to another company. Right when we were working on the third design, the Boreas was released. A couple of members of Steam Crave, whom we were working with, told us the story, and how it was almost a direct reproduction of the first design. We were all in shock, but not surprised. But that's ok.... like I said in my post, there's a reason why it was scrapped.... and one video reviewer showed the reason, unbeknownst to him.... it leaks. The Supreme is a result of a grand effort.... Steam Crave's customers..... what you hold in your hand is what I affectionately call "the people's atty"..... customers talked, Steam Crave listened, and eight testers with various backgrounds scrutinized it to the final product.... And even now, after the production release, the testers are STILL hard at it.... The Supreme is truly a "labour of love"..... I'm not worried about the Boreas, water (or e-liquid) seeks it's own level..... The Boreas, the Hastur and the Bellus can all sit quietly in a room together..... the Supreme reigns supreme, it has an army backing it.... ;-)
Cheers!"
I've seen the leaked steamcrave design with my own two eyes and I'm not shocked at how 'similar' it ISN'T to the Boreas. My Boreas doesn't even leak, and this guy kinda seems like a butthurt fanboy and he's full of shit. This was a PM to my reddit account in response to a comment I made stating I did not believe Roxy stole her design. Roxy, I have no idea why people are all uppity over this.
Last edited:
They are uppity over this because the Boreas kicks ass, Is taking their share of the market & probably pissed they did not come up with the Boreas themselves!
OH FYI Subtank supply has the black in stock & has lowered the price to be the same as the Stainless
OH FYI Subtank supply has the black in stock & has lowered the price to be the same as the Stainless
Mikhail Naumov
VU Donator
Gold Contributor
Member For 3 Years
Member For 2 Years
ECF Refugee
Unlisted Vendor
It seems deeper than that. There's a bunch of people saying the Alleria is a stolen Wotofo Serpent with a stolen Griffin deck (even though the Alleria deck is smaller and has glass around it, totally logical.. not really) as well, so maybe it's just people who don't like Augvape. Or maybe this is a conspiracy started by those people at ECF just to try and smear Roxy, which is exactly what I believe it likely is.
That top fill sucksHave you guys seen this
Sych RDTA
http://vapingunderground.com/index.php?threads/Sych-RDTA.223276/
VAPE IT
Mikhail Naumov
VU Donator
Gold Contributor
Member For 3 Years
Member For 2 Years
ECF Refugee
Unlisted Vendor
I feel an overwhelming need to ask you where you got that drip tip.