Absolutely my pleasure broAnd thank you for all the wire I didn't expect so much more then generous. I love it in my Marquis. Seems like a denser vape than ni200
Sent from my XT1030 using Tapatalk
Absolutely my pleasure broAnd thank you for all the wire I didn't expect so much more then generous. I love it in my Marquis. Seems like a denser vape than ni200
Sent from my XT1030 using Tapatalk
What device is this? If it's the IPV3 LI what version of the software are you running? I did the 200 watt upgrade but don't see this in the menu.
Sent from my XT1030 using Tapatalk
Ipv3 Li with the update 200w it adds ti mode but still 50jWhat device is this? If it's the IPV3 LI what version of the software are you running? I didn't the 200 watt upgrade but don't see this in the menu.
I did the 200 watt upgrade but don't have the coil selection menu.Ipv3 Li with the update 200w it adds ti mode but still 50j
Sent from my XT1030 using Tapatalk
You need you be in Joule mode to see it.I did the 200 watt upgrade but don't have the coil selection menu.
I am. I'm using ni200. I wonder if you have to have a ti build to see it.You need you be in Joule mode to see it.
Sent from my XT1030 using Tapatalk
I don't have that menu. Can you provide a link to the firmware you used when upgrading?Nope look for ni200 in the menu and toggle up
Sent from my XT1030 using Tapatalk
It's the only one on the siteI am. I'm using ni200. I wonder if you have to have a ti build to see it.
Do you have a link to the firmware you used.
I was using V1.5 firmware upgrade to V1.6 and now I see the menu for coil selection. I'm not able to adjust to 100J. Might have to do with the fact my build is .22 ohms.Pionner is FUCKED I feel bad for the ipv4 users no I'm glad I traded mine in for this one. The evic vt might get sold now.
100j 200w
Sent from my XT1030 using Tapatalk
Doesn't work on mine.No go to 50 hit down then hold up
Sent from my XT1030 using Tapatalk
Only in titanium mode it worksDoesn't work on mine.
Wonder why that is.Only in titanium mode it works
Sent from my XT1030 using Tapatalk
Probably cause ti can't take it and has higer resistance since you can use up to 20g and need the 100j I'm using dual 24 only 7 wrap and I'm at .11 86j feels like kanthal but with tcWonder why that is.
i think most people can appreciate that.
can you advise what makes spider silk superior to other grade 1 (95% pure or higher) Ti wire available for considerably less? esp if its not the special cleaning.
thanks!
Thanks for the marketing lesson ... I think. You are telling this to a guy with a couple of marketing degrees, so I'm short on sympathy. I also happen to be one of your customers.
1. We are as far up the distribution channel as we can get until we locate your supplier and order from them. By buying "direct," we can reasonably expect to eliminate markups we would experience to allow the distributors and retailers to get their pieces of the pie.
2. When I placed my order I was still waiting on my Evic. I found your company, scratched my head and decided you guys were first to market with Ti packaged and processed with vaping as the intended end use. So, I started my order. Got to the checkout and got short on oxygen when I saw that it would cost me $10 in shipping to get 15' of Ti wire. So, I continued my order but left you a nasty comment with my order about my appreciation for being charged such ridiculous shipping. Kudos to whoever filled my order and got my wire shipped. I didn't get an email trying to justify the shipping charge (would not have been received well). Rather, when I received my wire ... I got double what I ordered. This was a good move and this is the first I've mentioned that shipping charge which I hope has been adjusted to be more fair. What I have done is link you guys through Amazon which comes with a much more reasonable shipping charge.
3. I'm confident your volume has exploded since the Evic VT release. Given that the SX330 chip has already been updated for Ti wire and there are more Ti devices just around the corner ... this is a good time for you to adjust for the economies of scale you should now be adjusting for and find a set a market price which advantages improved economies. Juice companies are a dime a dozen 'cause the profits seem like low hanging fruit. Low hanging fruit get's picked over quickly. Now is the time to adjust your prices to reflect the volume you are enjoying to make the market less appealing for the competition that will be racing to get their piece of the profit level your pricing strategy allows. If you actually read this whole thread, you'll see that we've already started to get some of the vendors in the jewelry supply business wise to this opportunity.
4. I understand that you don't want to get involved in the acid etching version of preparation. I'm gonna suggest you get over it and do everything in your power to provide a product which is unmistakably superior. That way, vapers will know you love us and are prepared to absorb the risks so we don't have to.
Bring on some 20-22g since the ipv3 Li can do 100j in titanium mode tcSpider Silk is Grade 1 (F67 – ASTM) TI wire
We really do value our customers and we want to provide the best product we can at an affordable price.
1. As you most certainly know with your degrees, that selling direct at cost will eliminate any distributors and retailers—why sell a product when the consumer can get the same product direct for significantly less?
2. Shipping charges, we charge $3.49 shipping unless your order in over $50, then shipping is free. Not certain what happened there, but at least you were covered, great!
3. Economies of scale can be tricky, Space Jam/Five Pawns/JoyeTech/Amerivape/etc/etc/etc all are doing massive volumes and their pricing has not changed significantly. I agree with you, that with more demand we will be offering different lengths at discounted pricing and different gauges as well. Ironically, we started marketing Spider Silk originally as an alternative to kanthal and other wires; it just so happens that temp control market has exploded and will continue to do so. . .until the next “big thing” arrives. So, we will be making changes as we continue to grow. Again, we will not be trying to compete with the jewelry wire market as they do some things we do not (acid etching, little to no packaging and/or no distribution/resellers).
4. We are always striving to improve our system and our products, because we DO love you!
Thanks for your support!
We will be releasing 24g in about 1-2 months. We will keep in mind lower gauges as this tech is obviously advancing.Bring on some 20-22g since the ipv3 Li can do 100j in titanium mode tc
Sent from my XT1030 using Tapatalk
Thanks for the info! I had the 1st 200w upgrade and rechecked thanks to you.Still experimenting with TC.Have the IPV3 LI,2 Evic VT,Invader Mini,Smok 80 Xpro,and waiting on Snowwolf 200.Have about 30 mods and 50 attys and still use most of them.Neverending!!I feel bad I high jacked the awesome evic thread I made a new thread on the ipv3 Li
Sent from my XT1030 using Tapatalk
Some 24g or even 22 or hell 20g titanium and full 100j and tc yihi out did themselves. My dual 24g coils are chucking the tits at 86j 460°fThanks for the info! I had the 1st 200w upgrade and rechecked thanks to you.Still experimenting with TC.Have the IPV3 LI,2 Evic VT,Invader Mini,Smok 80 Xpro,and waiting on Snowwolf 200.Have about 30 mods and 50 attys and still use most of them.Neverending!!
All mods are different (and shiny!) so do enjoy all these threads.
I honestly don't feel the difference in ramp up or heat. Not sure about the ipv4 update but Denny from pionner said soon maybe a week or too I heard. The sx350j mini has a titanium upgrade already too
Sent from my XT1030 using Tapatalk
I think it's the 2.2 version of the 150w update. I haven't done it personally its what I heard.Where did u see the sx350j titanium upgrade. I want that
Even if you do happen to find the same thing for less being sold solely on a website with no intention of having it sold by other companies, then it probably comes in a baggie with no graphics and no Japanese cotton.
I would like to see that....I have one ordered as part of a co-op. There's a separate RBA base, which of course is a separate order!
I'm upset that as of July 10 they will be shipping a new firmware version and us early buyers are stuck. It's still a great mod just wish we could upgrade firmware.
Sent from my XT1030 using Tapatalk
Where is this v2.3 upgrade I can't find itI'm really enjoying my evic vt and don't regret buying it. I never use it in kanthan mode so the issues that have been found where it Ramps to 30w don't affect me. Had a couple of times where it jumped into power mode from ti but I'm convinced it was my builds. I have no regrets buying it, especially for only $60. My second one had a loose fire button and got stuck in firing mode a couple times because the Button was loose. Contacted joyetech and vendor and they promptly sent me a brand new one and said I can keep the old one.
That being said, I think I'm done being an early adopter unless the mod offers user upgradable firmware. I should have learned my lesson with the dna and I wasn't even an early adopter of that but still got older firmware than what's out now. I bought the sxmini m because of the upgrade feature and now I'm glad I bought 2. They just released a new upgrade (v2.3) that offers 75j on single battery and ti mode. At least with the usher upgradable firmware, I don't feel like I got shafted and own a $200 paperweight
I don't think it's up for public release just yet.Where is this v2.3 upgrade I can't find it
Sent from my XT1030 using Tapatalk
its only been released to testers so far. I emailed Amy at yihi and asked her to send it to me. She sent me the old updateS early so I hope she'll send me this one tooWhere is this v2.3 upgrade I can't find it
Sent from my XT1030 using Tapatalk
There's a post on the Sx Mini / 350j thread for a site selling them at $169.95Kinda makes me wanna buy a new one. I sold my original M the battery life wasn't good how I vape.
Sent from my XT1030 using Tapatalk
Do you sell wire m8?Absolutely my pleasure bro
No, I just sent him some of mine so he could try Ti out.Do you sell wire m8?
Dre BusardoI bought a clock with a thermometer inside so I can make sure my room is 72° for when I'm setting my coils up. I think I'm gone into the deep end with this vape game.
I bought a clock with a thermometer inside so I can make sure my room is 72° for when I'm setting my coils up. I think I'm gone into the deep end with this vape game.