What RDA is that?Dual Fused Clapton
26 g ss.
36 g ss.
Wrapped around a 2.5 mm screw driver
Reading 0.11 ohms
This is my 2nd Fused Clapton I ever made. I have been vaping for 4 months now. I build on and off when I have the time . I know it's not the best build but not bad for only building for 2 months . To me this is what this thread is about. Sharing the good and the bad. Vape on !!! Fuck those cancer sticks !!
Sent from my SM-G935T using Tapatalk
I'm jealous. I'm getting sick and tired of all my hex screws stripping. Flathead grubs would be awesome
Speaking of Mohawk. I need to know how to do either that or a enigma. Or something badass
You just under stretch your alien decore....stretch just until you see triangular shapes in the decore, then find the tension needed to do either a enigma or Mohawk.
trash box
I have an Allen key set I got from home depot. The keys are perfect, but the stock grubs for the limitless rdta are sub par, so I gotta buy new ones soon. Sadly the hole is too small to use Phillips or flathead grubs
I wish the plus came with allen grubs. Instead they used 2 totally different screws...yay! I took the stainless top replacement screws and put them in the sides.
![IMG_1909[1].JPG](https://vapingunderground.com/data/attachments/67/67155-885d35be0a0ecd06b9cbb145b764bc39.jpg "IMG_1909[1].JPG")
Mine failed. Going to try again tonightWell I was sick all weekend but busted out these 4x .4 28g alien framed staples and im pretty proud of myself this morning
View attachment 67187
My question about the Mohawk & enigma. So you want it to only hump on one side I assume, so you can coil and wick it?
Accidentally had a little bit of one going on the alien framed staple is worked on last night, wasn't successful though. Did 38g, might need more 36g practice
My question about the Mohawk & enigma. So you want it to only hump on one side I assume, so you can coil and wick it?
@whiteowl84
didn't get kotex. Is there a thread with info on how to use this shit
Giving it a go.
Yea Ive used that Ribbon for a 50PLY Framed Staple a long time ago....Its really good for Ribbon Sliders though!....its like Tin Foil.Giving it a go.
Avocado 24 glass is broke and my new azeroth is on its way. So using it in the mutation mt and tugboat to figure it out. Soo stoked on the mage gta that will be here this week. Need to get raymo one
KingOrchid order arrived today, he threw in some .6x.07 ribbon, anyone ever used that thin of ribbon??
My coil OCD is kicking in...
Gotta be high gauge stuff??
Almost. I even thought my batteries were in need of a charge - even though I'm using (2) 26650s in the Lux.
If you don't already have them, they are a must have. I got the iJoy 26650's and DAMN! I understand why Mooch ranted and raved about them. 30a CDR and they hit very well.
I'm pretty sure letting the spaced clapton float between ribbon frames would work if I pinned it enough but 0.3mm twists very easily. I need atleast 8 ply to even fuse. My first all ribbon staggerton is going to be 8x core and 4x on either side so it works out.Tried some too couple days back, more advice is appriciated @raymo2u
I use the topcap as weight method, staggers perfectly !
Weight method???
BeautifulGot some stuff in today...this is my new play wire..thought it was cool that it has my Teams logo on it with my handle!
There is some Kingorchid Wire in there also....
View attachment 67272 View attachment 67271
I was gifted a Pharoah RDA to send in my entry to the Rip Trippers comp, my first time using it and I went a bit over board...it looks like a awesome single coil Framed Staple but I didnt figure in the lighting quick ramp up the wire combination would have....
SPECS: 12 x .4R N80/24TM316L/46KD (5 Wraps/3mm ID @ .09 Ohms Single Coil)
View attachment 67268 View attachment 67270 View attachment 67274 View attachment 67275
With a FULL Juice well it can be drawn on for almost 2 hits until its completely dry and at the verge of a dry hit on a Parallel Box....for now its on my Hohm Wrecker G2 at 80w....just so I can vape it and not have to redrip as often, it still lights up like lightning though...back to the drawing board
Welcome
Just did my first framed staple, went quite well if u ask me.
10 ply .4 framed with 26g kanthal and fused with 40Ni80
Thank you man actually took some time to prep but was worth it in the end.
This is fucking genius. I have been wanting to do some staggered builds but hate wasting my precious wire!
Here's the loop method. That's what Dutch0hms is talking about only using a weight. About 1oz is good for 36g and up.
I don't recommend doing the loop by hand if you need it perfect.
Use that to get about 2" or so. Then do this:
https://www.instagram.com/p/BMacLlIA8_A/
I'm using a clothes pin thing:
I let the electric tape bite on the side my wrap wire is rolling on and the grooves lock on to the bottom.
All that's happening is the spaced clapton pushes dents into the tape an as it spins it repeats that pattern.
It took a while for me to get all this down so don't get discouraged if you mess up alot.
If your just doing a stagger you can also wrap a clapton half way up a wire cut off the spool and grab the end then back up the drill to loosen the wrap and repeat. Now that you habe two, grab the end and pull the clapton down the length of the wire. When you start fusing it will push the clapton down rung by rung.
Looks great. 28g works better for frames if you're using a regulated mod. Keeping above 0.1ohm and keeping the mass low are super important on reglated mods.Just did my first framed staple, went quite well if u ask me.
10 ply .4 framed with 26g kanthal and fused with 40Ni80
