f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
They'll work fine, I use them in my ipv70
Become a Patron!
Updates on the IPV4????
- Thread starter CTFX
- Start date
Hi @Maverik_X. Yes I did get my nickel coils from vaporshark. These out perform the originals by a long shot
Small world... I use to live in Lafayette, but vaping wasn't even invented back then..
I do miss being back there. Just sayin
from my Droid Maxx via Tapatalk
Maverik_X
Deez Nutz
VU Donator
Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
What size are the wicking holes on the coils?
What would you suggest as the best battery to use with the ipv4?
I'm not totally sure without measuring but they appear to be identical to the stock housing
Samsung 25Rs are an easy choice - 2500mah, 20A max current. That's what I'm using. The 3100mah EFests might also be good, but I have no personal experience.
CTFX
Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Great high drain batteries. You can pump them out till they go down to 3.5 v. Good all day batteries.
That's exactly what I did with mine as well! I have six total now, and two AW 2200mahs.
A funny thing happened at my local shop this morning...the owner happened to see me looking at the IPV4 and commented what an awesome mod that is.. Told him I had one on pre order for $79.99 but probly won't get it anytime soon..
He said wait here a minute...he came back with the silver (pic)
IPV4 and sold it to me for $85 including CA tax... I cancelled my pre order and already liking this mod alot more than I would have thought... Ordered the Nickel coils for the Atlantis and they should be here Monday... Thanks to @Bloke for the help learning the menu for joules mode.. I am stoked!!
from my Droid Maxx via Tapatalk
He said wait here a minute...he came back with the silver (pic)
IPV4 and sold it to me for $85 including CA tax... I cancelled my pre order and already liking this mod alot more than I would have thought... Ordered the Nickel coils for the Atlantis and they should be here Monday... Thanks to @Bloke for the help learning the menu for joules mode.. I am stoked!!
from my Droid Maxx via Tapatalk
Last edited:
NO.... I guess not anywhere near the SF Valley? (Cause if so, I'm off there right now LOL)A funny thing happened at my local shop this morning...the owner happened to see me looking at the IPV4 and commented what an awesome that is.. Told him I had one on pre order for $79.99 but probly won't get it anytime soon..
He said wait here a minute...he came back with the silver (pic)
IPV4 and sold it to me for $85 including CA tax... I cancelled my pre order and already liking this mod alot more than I would have thought... Ordered the Nickel coils for the Atlantis and they should be here Monday... Thanks to @Bloke for the help learning the menu for joules mode.. I am stoked!!
from my Droid Maxx via Tapatalk
Ooops - bit far for me :-(
Prsurf2k
Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
I really really happy for you all that have your IPV4.....
I'm still waiting on SMOG GroupBuys to even receive their order from P4Y.Oh and guess what ist a holiday in china for three days. Smog's Update page and reddit say after the 8th of May Shipped from china. But be that as it were I ordered the black color one and its a unicorn so far. no one has seen what it looks like final production wise. So guess I will wait for a couple weeks see where we're at with this group buy.
I'm still waiting on SMOG GroupBuys to even receive their order from P4Y.Oh and guess what ist a holiday in china for three days. Smog's Update page and reddit say after the 8th of May Shipped from china. But be that as it were I ordered the black color one and its a unicorn so far. no one has seen what it looks like final production wise. So guess I will wait for a couple weeks see where we're at with this group buy.
Maverik_X
Deez Nutz
VU Donator
Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Congrats on finding one near you.A funny thing happened at my local shop this morning...the owner happened to see me looking at the IPV4 and commented what an awesome mod that is.. Told him I had one on pre order for $79.99 but probly won't get it anytime soon..
He said wait here a minute...he came back with the silver (pic)
IPV4 and sold it to me for $85 including CA tax... I cancelled my pre order and already liking this mod alot more than I would have thought... Ordered the Nickel coils for the Atlantis and they should be here Monday... Thanks to @Bloke for the help learning the menu for joules mode.. I am stoked!!
from my Droid Maxx via Tapatalk
Btw Joules is the same as watts I can't see any real difference between them besides YiHi's Definition of them.
Last edited:
Maverik_X
Deez Nutz
VU Donator
Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
the pics on Vapor shark show the the wicking holes as the size of the atlantis coils when they were first released. ( v1 )
Aspire has enlarged their wicking hole sizes since the atlantis v2 dropped and they are 100% cotton now.
Just want to know the VS nickel coils wick hole size in relation to Aspire Atlantis v1 coils or the v2 coils. you can see the difference on aspire's website.
I would prefer the larger v2 wicking holes and 100% cotton.
Here is a pic of the vaporshark Atlantis coil housing. This is from my first nickel coil. It lasted a,solid 6 days,and over 100ml of high vg juice
Maverik_X
Deez Nutz
VU Donator
Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Those are v1 wicking holes the smaller ones is it all cotton inside?. does it still wick well with high Vg juices, I usually use 80% or 90% Vg JuicesHere is a pic of the vaporshark Atlantis coil housing. This is from my first nickel coil. It lasted a,solid 6 days,and over 100ml of high vg juice
Sorry for asking so many questions just curious thanks m8
No problems at all. Yes the inside is all cotton. I use anywhere from 85 to 95 vg and had no problems with wicking or dry hits. I chain vape this sucker and it never disappoints at 32 joules and 480 degrees
Maverik_X
Deez Nutz
VU Donator
Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
This should answer question
http://www.yihiecigar.com/products_info/Yihiecigar-SX330-V4S-295319.html
Maverik_X
Deez Nutz
VU Donator
Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Sweet thanks for the info I'm going to order a set and try them out. Wasn't overly impressed with the Kanger Nickel OCC coils. Prefer the rba with nickel for the subtanks.
Twisted420 said in his first look video of the iPV4 that the atlantis nickel coils can be used in the Freemax Starre or Vapeston Maganus tank if so that would be great.
Maverik_X
Deez Nutz
VU Donator
Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
If your going to use it in only Joules mode use these
http://www.ebay.com/itm/261854840064?_trksid=p2060353.m1438.l2649&ssPageName=STRK:MEBIDX:IT
If your going to vaping it at more then 60 watts constantly I would get these
http://www.keeppower.com.cn/products_detail.php?id=466
25r's are prob the best
My shop recommended these AWT 40A/2600 mAh batts..
from my Droid Maxx via Tapatalk
Maverik_X
Deez Nutz
VU Donator
Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Those are just rewrapped samsung 25r's google search it you'll seeMy shop recommended these AWT 40A/2600 mAh batts....bought 4...
from my Droid Maxx via Tapatalk
No need for all that..if my vape shop that sold me the IPV4 recommends these batts they got my back.. I don't believe everything I read on the internet anyway...lol
from my Droid Maxx via Tapatalk
Maverik_X
Deez Nutz
VU Donator
Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
don't get me wrong they will work fine they are just more expensive rewraps of Samsung 25r's still a great battery, Efest does the same thing their new 2100mAh 38 amp battery is just a repatched Sony Vtc4. and a great alternative to the Vtc5's with less capacity
Real Sony Vtc5's are near impossible to find most out there are cheap chinese clones that don't work as advertised
CTFX
Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
I was going to say the same thing. Honestly there is no ill will or offense stated. We are all here to help each other out. Even some b&m's are unaware of those facts. So all in all at least underneath the coat you still have high drain batteries....just aren't the specs that are listed
I'm right there with you. I ordered a black one from smog in round 2. I hope they ship on the 8th.I really really happy for you all that have your IPV4.....
HD
Well, seeing that alot of people who ordered from GearBest have received emails stating their order will ship next week I decided to email them for an update. They just replied to me telling me that their system shows it will be 8 more days until they have any in stock. Whether that is true or not remains to be seen.
Maverik_X
Deez Nutz
VU Donator
Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Your very welcome he's a good guy he's always taken care of me.
Be patient.... This mod is definitely worth the wait, I kid you not.. My hats off to P4U!
from my Droid Maxx via Tapatalk
st0nedpenguin
Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
It's okay, my vendor is on the priority list so I'll be amongst the first people to be receiving mine.
If you feel you can definitely get it faster off eBay simply cancel your pre order..
Its all good!
from my Droid Maxx via Tapatalk
Maverik_X
Deez Nutz
VU Donator
Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
I agree for a temp control mod priced under $100 with 100 watts and soon to be 120 watts it's well worth it.Be patient.... This mod is definitely worth the wait, I kid you not.. My hats off to P4U!
from my Droid Maxx via Tapatalk
What you think of the mirror finish of the screen Smacksy?
Maverik_X
Deez Nutz
VU Donator
Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
authentic vtc4's yes, clones no
the new efest 2100 mah 38 amp 18650's are just rewrapped sony vtc4's, get a set of them they'll do fine.
It really didn't bother me..I pulled off that plastic protective film and went outside in the sunlight..although I had to look closely I could read the display perfectly...I'm really liking this mod!
from my Droid Maxx via Tapatalk
Maverik_X
Deez Nutz
VU Donator
Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
I still have mine on to afraid of scratching the screen, I may order a universal zagg screen protector and cut it to size then take off the factory one.
I'm hoping Jwraps will have a wrap for it soon, been using it in my sig clear protective sleeve, it's a loose fit but ok for now.
Have you tried the temp control out yet?
Not yet.. I learned how to access the menu for joules mode but I'm waiting on the Ni200 Atlantis coils from VaporShark... They should be here Monday.
from my Droid Maxx via Tapatalk
Maverik_X
Deez Nutz
VU Donator
Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
right on start low on about 15 joules and low on the temp and work your way up in temp till you find where you like it then adjust the joules to your liking. joules are essentaily just watts.