help i'm new

I use a VooPoo Drag X with Cthulhu Artemis MTL RTA I'm not sure if it's a dry hit but it tastes like cotton. I use coilogy MTL Clapton coil 28/40 2.5mm 0.92 Ohm Ni80 and 50/50 e-liquid. I tried to wick it and change coils (but the same coilogy clapton coil) over 10 times. More wick, less wick...

I have a ez.watt vape and im using a prism T20 s tank and a 0.8 ohm coil and im wondering whether its safe to put 50mg salt nicotine in it. btw i have the vape set on 18 watts but it can be set both higher and lower the wattages are 13, 14, 16, 18, 30, 35.

Hi, new guy here, I have a Limitless LMC2 220w box mod and the fire button isnt working properly. I have to either press it hard as f#*@ or press it at an angle to get it to fire. Sometimes it will work fine for a few minutes but then act up again. Not sure whats wrong with it. Any tips would be...

Hi All, Beginner Vaper here, and I would appreciate some help. I recently bought a Vaporesso Armour Pro with the Cascade Baby, and it was working fine initially. I was using the stock mesh coil in it, with Nasty Juice fluid on around 50W. Nice big clouds, great taste, all good. Since in my...

I have a mod with 3 mg of nicotine. Other than obviously buying juice with more nicotine how can I get a bigger buzz? I'm using 75 watts and my coil can go up to 100

Hello fellow vapers, Here is a bit of a TL DR story and there will also be questions at the end of it. Please have a look at the questions, don't wade thru my drawn-out 6 mile long rant, not unless you are having trouble falling asleep. So, the first kit I bought was the Eleaf Just-S, two of...

I just purchased The Drop after using El Diablo 2574 and used the Diablo on my T Priv Smok. Great views on the drop and love the aspect of cloud vaping (as a new vaper in the sense that a friend hooked me up with El Diablo and taught me a little bit about building coils) my coils and cotton were...

Hello Im new to vaping and already have a problem And Im not sure what do to. these what ever they are called In the pic wont stick together Do I need to buy another one?

Hi so I bought a vape today and I don't know what type it is or any thing cause its my first but it has four brass (I think thats what it is) ports that line up to charge control the screen and activate the vape. One of the brass pieces for the screen/charger is missing is there any way I can...

Guys I was gifted a brand new Smok G-Priv 2 with a Manta RTA tank and 24G Nichrome Ni80 wire. First Time Vaper here :) (Sorry, the thread being long) Can someone please help me figure this out without me blowing up my Face I checked YouTube on the Wattage and ohms but not 100% sure where to...

sorta new to vapeing. so i vape 0nic. so not nic overdose. but some flavors just make me sick to my stomach. like im going to puke! but its when i take the first inhale. it is immediate after exhale. and its not like the flavor is gross. when i smell it it smells amazing. its just when i vape it...

I bought a wismec predator 228 around a month ago, I have used it a lot. I have a few problems for example I dont know why it is overheating so much after a few puffs I dont know if I should change the temperature and the aettings or something please help. Also I have a question on why I have...

So I've looked everywhere and it seems like nobody can give a straight answer. I've jut bought the new Voopoo Drag 157W and the Goon rda. I'm running 0.17ohm with a dual coil build using two Samsung 25R5. Is it really safe? I've stopped using it for the last 3 days because i got scared and i...

i am new to this forum and basically let me tell u first i am a beginner and have been using kangertech subox mini c for about two month or so and well m not satisfied with this device. it gets heat-up real quick. the drip tip i cant change it and it hurts really bad after 2-3 long puffs. m a...

I just started about a month ago and bought the smoke al85 with the baby beast tank and I went through the 2 coils that came with it. Now I need to get new ones but idk what to get that would last and give good flavor I like it around 60-65 watts. Any suggestions please

I recently bought a new baby beast everything has been working fine and i really like it. Then after about a month i burned the coil. My friend also had a baby beast and never used it. I asked if i could use the top part of his baby beast so like everything except for the mod. He put it on my...

I went and bought the Wismec Reuleaux RX200S with the Griffin 25 RTA tank. I built dual coils with 26 ga SS 316L using my fancy new coil master, .40 ohms. I'm still not 100% sure how my watts and voltage should be set.

Semi new to vaping and building. Having troubles with the Smok Big Baby Beast on a Wismec Reuleaux Rx200 ( Baby beast isnt even 6 months old). Would appreciate some help. I do not have a testing kit yet.. Sadly... ive been using some triple Clapton coils in a build, for a couple months and have...

I just got a Kanger Dripbox 160 today and im really exited to use it. The only other mod I have owned is the smok g priv and I know almost nothing about RDAs. My question is how do I know im not over charging my batteries. Im using the pre installed coil in the RDA but im not sure how many watts...

Hello I need some help here with my mod. I'm using an Aspire Pegasus mod with Horizon Arctic Tank Atomizer Sub Ohm Subtank with this coils: BTDC II (kanthal wire) NI200 0,5 ohm. is this safe to use? and another question, why does not the device change to TC mode or should it be watt mode with...

Hi guys! I just bought my first starter kit a couple of hours ago and I need help. When I take a pull it feels like some of the e juice is getting in my mouth. It's hot and it tastes super strong. Is that normal or should that not be happening? It's an Eleaf iCare kit and the e juice I have...

Hi all wondering if you could help me ?? I've just put my new tfv12 cloud beast king tank on to my smok g-priv mod in watt mode and it keeps saying ohms to low , how can I sort this out or should I run it in to mode ??? Any suggestions please

hello I'm new to vaping and wondered if my high vg e liquid is ok for a smok tfv 8 tank?

just bought a Rx200s with a tfv8 baby beast tank , tank was producing big clouds. Now few days later it's not making huge clouds anymore And I tryed changing the coil , it's not doing big clouds like the first days! I've only had the new tank for about 3 -4 days

just bought a Rx200s with tfv8 baby beast tank , was woundering at wattage should i be using it at ? And what does the volt mean on the sreen is there certain level I should have the volt at ? And wattage ? Thanks !

hey everyone I am currently running a fuchai 200w with a crown tank, I don't produce that much clouds.. how do you get bigger ☁️ ☁️?

Hi everyone, i have got my brand new hohmslice and stupidly updated with the hohm wrecker g2 firmware instead of the hohm slice firmware, so now my device does not turn on nor does my computer detect it. Im wondering if anyone has a work around to get it working again or is there a recovery tool...

Hello all, I'm new to the VU and I'm honestly looking for a fruity pebbles recipe. Distinct fruity pebbles with or without milk. A buddy of mine used to make it for me before he got stationed in Europe. Now I'm out and I need my fix lol. Any and all help wills be greatly appreciated thanks!

The Perfumers Apprentice / Black Honey The Perfumers Apprentice / Cantaloupe The Perfumers Apprentice / Creme de Menthe The Perfumers Apprentice / Hazelnut The Perfumers Apprentice / Key Lime The Perfumers Apprentice / Mojito / Мохито Totally Wicked / Passion Fruit Totally Wicked / Singapore...

I bought this mod on ebay after reading several reviews and it is known for being very simple but...im a little new to box mods so heres the deal. the coil that came in it stared tasting burnt in a day, hours really and i wasnt puffing alot i was at work when i got it. i gave it about 20 mins to...

Hey Guys I bought a new mech mod, it's my first unregulated mod that I own and I can't get much info on it online the web site is discontinued Google isn't much help at least it directed me to this forum that I can use and find help regarding my mod so its a KUI Bottom Feeder I want to Know How...

Hey guys, I just bought an avocado tank and it was working very well at first. But since I started using it, it's starting to pop and it's just not smoke able right now. Does anyone know what the problem is?

Ok folks I need some assistance. I'm new to diy so bear with me. I ordered some diy items from mbv to try making my own juices at home and nothing seems right about it. I've ordered premade from mbv in the past so that's what I'm comparing my results to. I ordered some of their 50/50 pg/vg nic...

hi im a new vaper, and got two differrent types of e-liquid. And now im done with the first one and want to switch to the other. Can i just fill the other in eventhough there is still some liquid from the last one. Or do i have to do something else? Thank you so mutch for helping me!

I have a Dovpo e-lvt with a kanger sub mini tank. I have it set around 25.5 don't know too much about all this. I'm trying to get great taste and my 1st 1-2 hits are great then my next one feels warm and looses flavor unless I let it sit for 2-3 min. The lady at store said I need new mod that...

So i am looking for a good rda for my white kanger 75 w tc. Something that looks good taste good and easy to build. So nothing that is too complicated. I would like to know what you guys like to vape on. And what should i look out for. I saw the velocity rda but i can only afford a clone and...

I was just wondering if my method for cleaning my tank was safe I have seen other threads about the topic but there didn't seem to be any consensus. I basically take my Nautilus tank completely apart and soak it for 10 minutes in 70% isopropyl alcohol. I then rinse each individual part with...

I'm sorry if this question sounds naive as I am relatively new to vaping. I currently using a Nautilus Mini Clearomizer tank and use prepackaged Aspire Triton Mini Clapton Coils (1.8 ohms) in this tank. I just wanted to ask if it is necessary to clean a prepackaged coil before installing it and...

I got myself a kanger 75tc mini kit and i couldnt understand some things. 1. What coils can i use for Tc and what for VW?(just to clear thimgs out im not a native speaker of english) 2. What happens if i vape a coil that is only for tc and not for VW vica versa? 3. Currently i am using the...

This is probably a worn out topic... so i apologise in advance.. I just built a dual clapton coil on griffin atomiser.. using a koopor 200w reg mod box... running 50w and 0.13 ohms.. Its takes forever to start producing vapour.. and once it does.. it has this metallic burning metal taste...

hey guys I am new to box mods and rda's. I currently have a fixed wattage mod at 40w and have a 0.5ohm tank. I bought my first rda and built a 0.3 ohm dual coil set up and it works great. I am looking to buy a new box mod which is variable. It can go to a max of 70w and says that it can use...

Hi! I want to start vaping again and i wouldl like to buy a kanger topbox mini kit. But i dont know what battery to use. I watched lot of rewievs and such but i dont know which battery is the best for this device. and also if u have any experience witht the kanger topbox kit positive or...

Hi guys :) I've been vaping for almost 2 years now on the Eleaf I stick 30w and aspire mini tank. I've decided to upgrade to the kanger subox nano kit in a gorgeous pink shade :p I've ordered the kit and a battery (Samsung inr18650-25r 18650 2500mAh flat top high drain battery (SAMBTY) - it's...

Hello i have only been vaping for about 2 months and i have tried out a few different juices and had some good and bad results im trying to figure out where to go. i am currently vaping on a joyeteck evic vtc mini mod and i have tried 2 different liquid companies one is called stimulus i used...

http://www.vapordna.com/ProductDetails.asp?ProductCode=XCUBE1%2D0003&CartID=1 http://www.vapordna.com/ProductDetails.asp?ProductCode=EF20A3%2D0002&CartID=2 http://www.vapordna.com/ProductDetails.asp?ProductCode=GSAITC&CartID=3