sub ohm

Just looking for some opinions on which rda to purchase for my noisy cricket. I need plenty of airflow and a decent well. I am ok with the slight over hang from a 24mm. Any advice would be great. Thanks Everybody!!

CoilART Giveaway , get enough free coils for whole year 2016 vaping -ends 3/30/2016 Every lucky winner can get 25pcs FREE coils: 1 pack Ceramic coil (5pcs) 1 pack Kanthal coil (5pcs) 1 set Coil Kit (1pack TC Combo + 1pack Clapton Combo + 1pack Twisted Combo) TC Combo: Ti, Ni200, NiTi Clapton...

To start, I have very limited experience with the plethora of sub ohm tanks out there. I started with the V1 Atlantis (which I still love), the moved on to the Silo Beast. I eventually sucked up up and got a Sub Tank mini, and Triton. Now I have the Toptank. Of all of these tanks, I...

It'd be awesome if those who managed websites did it the way I used to. Or at least put forth an effort to care. It really doesn't take that much more work to update and manage a database. I'm referring to searching for new hardware. If you were in the mood to look for a new mod, you could use...

Okay I know it's kind of taboo and whatnot. Not posting to get bashed, but who can say they run their vtc4 battery in a tube mod under .1 ohm and what's it like, I've got a .11 dual parallel 24 ga build in my kennedy on my SMPL mech and i only use authentic vtc4 batteries.. This is an all day...

I've been researching lately on which sub ohm tank to buy for my Kangertech KBOX 70 watt, and after all the research and reading, I decided to go with the aspire cleito. However, when I filled it with juice (running the .4 ohm coils at around 55 watts), It immediately started spitting juice. I...

Hi, (setup: cuboid 40-50W cleito 0.4ohm) just got the cleito and it was great for the first day i only vaped the 0.4 ohm coil and after the second day the coil is burnt. I let the guy at the store prime it for me. i filled the tank up 3 times before starting to get burnt hits. Is it possible...

Hi there, My battery mod will only take tanks up to 18.5mm diameter- max, preferably 17mm. I have a subtank nano with my trusty nautilus mini for backup. The subtank nano is only 2 months old and leaks all the time so I can't use it anymore without going crazy!... Love the increased vapour...

Recently got the Cuboid and its awesome just using the cubis on it for now.. enjoying the cubis but want bigger better tank to play with. what do you think would be a good match for my cuboid? I can not decide on which tank to choose! or any other sub-tank suggestions

Hi, every time i refill my cubis tank with juice i tend to get juice when i try to hit it again once its filled up. I haven't over filled it, I usually go well below the max fill to be safe.Ive tried it now with 50/50 and 70/30 juices and it still happens

Here is a rundown of the Uwell Crown Sub-Ohm Tank in Rose Gold Thank you to vapordna.com for the mod! This is my go to Tank for flavor and vape now! Take a look why. ------------------ About us: Avid vapers back in 2009, watching the industry grow and evolve, while trying to bring the best...

Hey Guys, We have a wide varitey of different flavors and nicotine level e-liquid. Check it out at tsunamiecig.com

I'm pretty new to the vape scene and have been doing some research, and I want to get a RTA build and use 316 stainless steel wiring with organic japanese cotton. Just wondering what ohm I should be shooting for with an ohm reader? I currently have the evic vtc mini with .5ohm ti coils. I've...

Hello. I'm just getting into doing my own coils and what not. Im a noobie so please bare with me. I have a general understanding of how they work. Thicker wire takes longer to heat then the thinner wire. The higher the gauge the thinner it is etc. But i have a Kanger Kbox Mini with the subtank...

This product was sent to me for review for you. As always, I will give you MY honest opinion about this product, good or bad….so let’s go!! This is the upgraded version of the original Cool Fire IV which I personally am a big fan of. Now with 70 watts of power, and a 3300mah internal battery...

Ey mates, I'm trying to figure out whats the lowest and safest ohm reading i can have with the 18350 MXJO 10.5 amps. My buddy says .4 is the lowest and i wanted to get a second take about it.

I have been looking at getting the CoV Vengeance for sometime now but wanted to wait for the spitfire to come out. Both are supposed to be great flavor tanks. Does any one have any experience with BOTH? small budget and can only afford one. I'm sure either would be great but want to get best...

Good morning VU vapers, It is been a long time for posting our new give away. Still remember Focalecig? :p Post any subohm atomizer you are looking for or you wish Focalecig to sell :) Two posts are limited for each member. We will select a winner on Nov.27th. If there are over 300...

I've been interested in this mod for a little while and wanting to set up an affordable sub ohm mod, I have some questions about compatibility: ABS V2 Style Mechanical Box Mod Unregulated Mosfet Chip 18650 RDA Mod: 1. Will both of these work/fit on the mod without rebuilding it? 2. Which do...

Innokin ISub G Tank: As usual, let me start off by saying that this item was sent to me to review for you. As always, I will give you my honest opinion about this product, good or bad…..so let’s go! This tank didn’t look like much when I pulled it out. It was very clean, and came with an...

Project Sub-Ohm Saucecode Tank With the Saucecode Tank’s bottom crossed dual coil design, Availability to use several other coils, a spill-proof top-fill system, and adjustable quad-airflow, this Project Sub-Ohm tank is an interesting tank indeed, but definitely has some issues. Vapordna has...

Crown Sub tank by Uwell This is a great tank for any vaper! Constructed of stainless steel for a durable structure and utilizing quartz glass for its tank, the Crown Sub tank by Uwell is the one of the better sub-ohm tanks to hit the vaping market. It features a top and bottom filling design...

kanger subtank mini v2 is the newest version of kangertech subtank mini series tanks. this tank made of stainless steel and pyrex glass,same capacity,can hold 4.5ml e juice, use the OCC coil heads,0.5ohm and 1.2ohm coils available,the sub ohm tank with 510 thread, fit most of mods.now the...

im looking to blow huge clouds and im new to sub ohm/mod vaping. I have a kangertech sub ohm plus tank but the prepackaged .5 ohm coil can only go up to 30 joules. i want something that can function at 50w/j but be able to go up to at least 100w/j. im willing to spend up to $60 for something...

I would really be interested in a DNA200 mod if someone could work something out with me... I am looking to sell or trade a lot of the tanks I don't use anymore for another tank or a TC mod. Let me know what you'd be interested in trading and we can try and work something out! Make an offer...

So i've used mech mods for a while now. But have yet to get my hands on a box mod. My question is, I built a dual coil build at .07 ohms (dual triple twisted 24g) Would a box with two 20amp cont batts handle a .07 build? i use samsung 25r and imren 2500mah purps. they handle my .1ohm builds in...